Nero ultra error

[refract]

Anyone know what this error is? I've burned plenty of dvd's, but had to reinstall Nero (upgraded to 6.6a) and now get this. Another problem, not sure if it is related or not, but anytime my external firewire is connected, xp boots up and the progress bar goes,.then i get a black screen.
This same problem is happening on 2 different computers.
Also running AVP, and no viruses detected.
thanks
signed,.. "slowly going insane"



Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 12/22/1997 4:23:24 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 3/29/2005 8:31:56 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <PIONEER DVD-RW DVR-104> Version: 1.33 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 0
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-104 >Version: 1.33 - HA 0 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : PIONEER DVD-RW DVR-104 atapi Port 0 ID 0 DMA: On
DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: On
DiskPeripheral : SEAGATE ST1181677LWV 0002 adpu160m Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-104 F: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523244kB)
Free physical memory: 186MB (191212kB)
Memory in use : 63 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

29.3.2005
UDF/ISO compilation
9:30:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

9:30:51 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

9:30:51 PM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

9:30:51 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

9:30:51 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

9:30:51 PM #6 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-104 running

9:30:51 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:30:51 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:30:51 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

9:30:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

9:30:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

9:30:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: PIONEER DVD-RW DVR-104, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

9:30:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:30:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [PIONEER DVD-RW DVR-104]
--------------------------------------------------------------

9:30:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-104] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

9:30:52 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:30:52 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

9:30:52 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:30:52 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 1x (1,385 KB/s)

9:30:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:30:52 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

9:30:53 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON

9:30:53 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

9:30:53 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:30:56 PM #25 SCSI -1024 File Cdrdrv.cpp, Line 1435
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03C90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x08 0x01

9:30:56 PM #26 CDR -1024 File Writer.cpp, Line 311
Communication failure

9:30:56 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:30:57 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:30:57 PM #29 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was -1

9:30:57 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 1x (1,385 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 11:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 12/22/1997 5:02:46 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 9:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option)

[blutach]

A couple of things:

1. Media is not liked. See this? Means media isn't being recognised.

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

2. So, update firmware for DVD writer (you have version 1.33, the latest is 1.41). See here. And if you still have bad burns, buy media that your drive recognises.

3. Turn DMA on for hard drive. See my sig for how.

4. See my sig - Interpret Nero's Error Coes for more info on this error.

Regards

[refract]

2nd try

Forgot to say I already enabled DMA, and still didn't work last night.
Also,.. I did just update "http://www.pioneeraus.com.au/media/downloads/r4fw141.zip"
And it still did not work. Seems to be making coasters.
I'm using Sony DVD-R 4.7gb media.
This has always worked before. Not sure why it will not work now.

Did a regedit, and removed anything named "Ahead" and "Nero"
did a reinstall of Nero, and still getting the same. Put in the http://ww2.nero.com/us/WNASPI32.DLL.html... and still did the same.
Jumper settings?.. I don't think that is it.
It seemed to want to burn at 2x though, when I've always burned at 1x. Joliet and long extension names are enabled.
Even burning a data disc stops.

[refract]

more notes

Also says, "Communication Failure", before it fails.

[blutach]

Better to use Nero's clean tool than kill the registry like that. See here.

Read that link about Nero's error codes.

According to your log, DMA is NOT on for your hard drive.

And, best of all, try to burn with DVD Decrypter. IMHO, Nero is a POS (but I'm a famous Nero basher ).

2x would be very slow for that drive. It's clearly a media thing. Try something else.

What's the media ID of your media - not the brand but the ID code see my sig for how to find this out).

Regards

[refract]

got a blue screen of death

bsod after running the clean, but xp ran fine after that.
Nero was uninstalled, so I did a reinstall, set it to 1x and tried to do a burn, and still the same error.
My DMA settings say dma2 not 5,.. is that a problem?
I'll pick up some new dvd-r's and see if it will burn.

thanks for the help

[setarip]

To refract

"says, "Communication Failure", before it fails."

Go to:

http://www.nero.com/en/FAQs_Error_Messages.html

Scroll down to ANSWER #12