cyclic redundancy

[thatwdbme]

Can someone post that list of protected movies again. I assume that these wll stay protected for now. Is this the plan for all dvds soon?

[thatwdbme]

What are dummy sectors as they apply to Dycrpyter...example:

I 18:36:55 Decrypting VTS_11_1.VOB... (LBA: 807177 - 1331463) - KEY: C0 7E 6E D0 7C
W 18:37:13 Inserting Dummy Sectors... (LBA: 815360 - 823543)
I 18:37:13 Extracting Sectors...

[cynthia]

Dummy sectors are just blanks. It's just to replace the sectors that couldn't be read.

[Alien Bay]

Originally posted by thatwdbme
Can someone post that list of protected movies again. I assume that these wll stay protected for now. Is this the plan for all dvds soon?

Here.

http://forum.digital-digest.com/showthread.php?s=&threadid=48842

[thatwdbme]

what's the average time for a file to be encoded in DVD Shrink? A decrypter file im encoding is taking 1 1/2 hours! One other from a disc took about that long just to shrink too, and I'm used to about an hour at the most. It has seemed to be longer than normal lately. Would a reinstall cure this? Do the issues ever stop??? lol

[cynthia]

@ thatwdbme: This FAQ could give you some clues.

http://forum.digital-digest.com/showthread.php?s=&threadid=47035

[hello people]

The DVD I am referring to is the doco film...The Corporation. I kind of knew there were no defects on the DVD. I suspected copy protection from the start

[thatwdbme]

Hello everyone. For the record, the advice regarding dvd dycrpter did work.. Thanks for that.

The following is a series of messages I get at times when I try to Burn in DVD Srhink using Nero:

6:59 AM - DVD-Video files reallocation started
6:59 AM - DVD-Video files reallocation completed (no file modified)
6:59 AM - DVD-Video files sorted
7:00 AM - DVD-Caching files started
7:00 AM - DVD-Caching of files completed
7:00AM -Burn process started at 4x (5,540 kb/s)
7:03AM- SONY DVD RW DW-U12A
Queue again later
SONY DVD RW DW-U12A\H1T0
7:03AM- SONY DVD RW DW-U12A
PMA update failure
7:03AM- SONY DVD RW DW-U12A
Could not perform end of Disc at Once
7:03AM- Burn process failed at 4x

I get this one quite a bit, or something of the sort when I burn in Shrink using Nero. The chances of the process being successful is about 50/50. When it occurs, I may use burnatonce to create an image and then burn the image with Roxio. This is too m any steps for my liking though. What does the above-mentioned error mean, and what can be done about it? I have the latest firmware for the drive.

[cynthia]

@ thatwdbme

It would help more if you had posted the whole log file from Nero.

[thatwdbme]

@ Cynthia

That is the entire log as it was posted, stating with the reallocation start to the burn process failed dialogue. This was the log as it printed in the burn status box that comes up in Shrink after you put in the blank media. so all of this happened in Shrink, while burning with Nero (if that makes sense). If this happens while using Nero by itself, then the dialogue in its log may have been different. If I encounter the error while using just Nero itself to burn, I'll post that one too. The only other thing was a smaller box that just repeated that the burn process failed. Sorry I can't provide more, but the error symbols started showing up next to the dologue starting at 7:03, PMA update failure (or the queue again later message, i dont recall) if that helps...

[cynthia]

You can still find the whole log file at this location: C:\Program Files\Ahead\Nero\NeroHistory.log

This one is more detailed.

[thatwdbme]

OK, I found it, although I had to put the location in my search bar. I couldn't find it under explorer. I wonder why? Oh, I was looking for an executable file, I got it now. ANyway, here it is:


[08.05.2005]------------------------------------
22:05:15 Robot error messages from:
====== *** NeroAPI, History File *** ======
s

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <SONY DVD RW DW-U12A> Version: 2.0e - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DW-U12A >Version: 2.0e - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-U12A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : CDWRITER IDE5224 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-U12A F: CDRom0
CDWRITER IDE5224 G: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523628kB)
Free physical memory: 131MB (134548kB)
Memory in use : 74 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.5.2005
UDF/ISO compilation
6:59:59 AM #1 Phase 112 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation started

6:59:59 AM #2 Phase 114 File dlgbrnst.cpp, Line 1855
DVD-Video files reallocation completed (no file modified)

6:59:59 AM #3 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:59:59 AM #4 Phase 111 File dlgbrnst.cpp, Line 1855
DVD-Video files sorted

6:59:59 AM #5 Text 0 File Reader.cpp, Line 126
Reader running

6:59:59 AM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DW-U12A running

6:59:59 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:59:59 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:59:59 AM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

7:00:00 AM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2180959 (484:39.34, 4259MB)

7:00:00 AM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

7:00:00 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: SONY DVD RW DW-U12A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR004
Disc Application Code: 64, Disc Physical Code: 193

7:00:00 AM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:00:00 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2180960 (2180960) = #2180960/484:39.35
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2180960 blocks [SONY DVD RW DW-U12A ]
--------------------------------------------------------------

7:00:00 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DW-U12A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4466606080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2180960 | lead-out | 1 | 0x00 | 0x41

7:00:00 AM #16 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

7:00:00 AM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

7:00:00 AM #18 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

7:00:00 AM #19 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 4x (5,540 KB/s)

7:00:01 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:00:01 AM #21 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 13:32,312 (812312ms) -> OK

7:00:01 AM #22 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode

7:00:01 AM #23 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Power-Burn -> ON

7:00:01 AM #24 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes

7:00:01 AM #25 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:00:03 AM #26 Text 0 File Cdrdrv.cpp, Line 1297
07:00:03.281 - SONY DVD RW DW-U12A\H1 T0 : Queue again later

7:03:03 AM #27 CDR -25 File Writer.cpp, Line 304
Queue again later
SONY DVD RW DW-U12A\H1 T0

7:03:03 AM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:03:03 AM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

7:03:03 AM #30 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 2239

7:03:50 AM #31 SCSI -1194 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0xFF 0xFF 0x03 0xB0 0x12
0x00 0x00 0x00 0x00 0x73 0x04

7:03:50 AM #32 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:03:50 AM #33 CDR -1194 File WriterStatus.cpp, Line 164
PMA update failure

7:03:50 AM #34 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

7:03:50 AM #35 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:03:50 AM #36 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.1.7 , size=24698 bytes, created 6/25/2003 12:18:48 AM
File 'Drivers\PXHELP20.SYS': Ver=2.02.50a, size=17136 bytes, created 1/16/2003 5:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[cynthia]

Your firmware don't recognize your brand of dics. You have the latest one installed.

There is a later version of Nero. It's free to update.

Only solution here is to change to a brand of discs that your burner like.

[thatwdbme]

Isn't there a link that tells you the type of discs that works best with your drive/firmware? I thought I had one, but can't find it at the present.

[cynthia]

http://www.dvdrhelp.com/dvdwriters