Burning problem ATAPI DVD DD 2X16X4X16

**cynthia** · 15 May 2005, 02:44 PM

Hi and welcome to the forum, DKeith2011!

Using a new package of your discs?

Disc Manufacturer: CMC MA - G. AE1

Not the best media out there to use. CMC Media has a history of instability. You could try to to change media or burn at a slower rate.

**DKeith2011** · 15 May 2005, 03:11 PM

Originally posted by cynthia
Hi and welcome to the forum, DKeith2011!

Using a new package of your discs? Not the best media out there to use. CMC Media has a history of instability. You could try to to change media or burn at a slower rate.

It is a new pack (Memorex DVD-R to be exact).

And maybe Im just being dense, but how do I lower the burn rate? I've looked and cant seem to find a way to reset it.

**cynthia** · 15 May 2005, 03:20 PM

You could use this FAQ to see if the media code is the same as in the new package compared to your old discs. http://forum.digital-digest.com/show...threadid=48417

Burn rate - in the backup section - tab 'Burn settings'.

**DKeith2011** · 15 May 2005, 03:42 PM

Originally posted by cynthia
You could use this FAQ to see if the media code is the same as in the new package compared to your old discs. http://forum.digital-digest.com/show...threadid=48417

Burn rate - in the backup section - tab 'Burn settings'.

Tried changing the burn speed on the same media and got the same error.

Changed to a different media (happened to have one disk of an old pack left) at a lower speed and it worked fine.

Guess I'll be changing media from her on out.

Thanks for the help.

**cynthia** · 15 May 2005, 03:45 PM

Just as a side note: There is a later version of Nero - it's free to update and I couldn't find out what burner you have so I couldn't see if there was a newer firmware to install.

But it do work now - so it's your descision.

**setarip** · 15 May 2005, 05:21 PM

It appears to be an "I/O Magic" burner:

"ATAPI DVD DD 2X16X4X16" - Google Search

http://www.google.com/search?hl=en&ie=ISO-8859-1&q=%22ATAPI+DVD+DD+2X16X4X16%22&btnG=Google+Search

**cynthia** · 15 May 2005, 05:43 PM

Thanks setarip

So there is a later version G7M9 to install.

IOMagic.com - Not Found

http://www.iomagic.com/Firmware/1620A/1620A_G7M9.zip

A leader in design and manufacturing of desktop and mobile technology products for over 20 years.

IOMagic.com - Not Found

http://www.iomagic.com/Firmware/FirmwareDownload.html

A leader in design and manufacturing of desktop and mobile technology products for over 20 years.

**setarip** · 15 May 2005, 06:24 PM

"Thanks setarip"

My pleasure ;>}

"So there is a later version G7M9 to install."

I don't think the I/O Magic website CLEARLY indicates that "G7M9" firmware is newer than the "G7Z9" firmware...

**blutach** · 15 May 2005, 07:25 PM

Your burner does not like these cheap and very nasty disks

"Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"

Give them to the kids as Frisbees and buy good media. Read the golden rules of burning in my sig. Lower burn rate to 4x, especially with this rubbish. Also read Media quality in my sig.

Regards

**setarip** · 16 May 2005, 01:55 AM

"Changed to a different media (happened to have one disk of an old pack left) at a lower speed and it worked fine."

Been there, done that;>}

**DKeith2011** · 16 May 2005, 09:56 AM

Here We Go Again

Burn Failed At 4x (5,540 KB/s)

Nero Serial Removed*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.23
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <ATAPI DVD DD 2X16X4X16> Version: G7Z9 - HA 1 TA 1 - 6.3.1.23
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75FJA1 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVD-16X DVD1648/BKH atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD DD 2X16X4X16 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
DVD-16X DVD1648/BKH D: CDRom0
ATAPI DVD DD 2X16X4X16 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 627MB (642516kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.5.2005
NeroAPI
6:42:48 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

6:42:48 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

6:42:48 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

6:42:48 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

6:42:48 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

6:42:48 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:42:48 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:42:48 PM #8 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

6:42:48 PM #9 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

6:42:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

6:42:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: ATAPI DVD DD 2X16X4X16, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR004
Disc Application Code: 64, Disc Physical Code: 193

6:42:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:42:48 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [ATAPI DVD DD 2X16X4X16]
--------------------------------------------------------------

6:42:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ATAPI DVD DD 2X16X4X16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286112 | lead-out | 1 | 0x00 | 0x41

6:42:48 PM #15 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

6:42:48 PM #16 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

6:42:48 PM #17 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

6:42:48 PM #18 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

6:42:48 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:42:48 PM #20 Text 0 File DVDR.cpp, Line 1955
Recording mode: Sequential Recording Mode

6:42:48 PM #21 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Seamless Link -> ON

6:42:48 PM #22 Text 0 File DVDR.cpp, Line 2096
Start write address at LBA 0
DVD high compatibility mode: Yes

6:42:48 PM #23 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

6:42:48 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x30 0x00

6:42:48 PM #25 Text 0 File DVDR.cpp, Line 5129
Drive: ATAPI DVD DD 2X16X4X16
Book Type request: DVD-ROM
Drive doesn't support changing Book Type for DVD-R

6:42:48 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc

6:42:48 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once

6:42:48 PM #28 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)

6:42:48 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

6:42:48 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 5:28:09 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Same type of media as I mentioned above and I get the same error.

Made sure the burn speed was set correctly and that the computer was undisturbed for the entire time.

Help?

**setarip** · 16 May 2005, 10:06 AM

"Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................"

and

"Illegal disc"

Your burner doesn't recognize this Optodisk (Disc Manufacturer: OPTODI - SCR004) media either.

If you don't want to perform the firmware update suggested by "cynthia", then:

"Changed to a different media (happened to have one disk of an old pack left) at a lower speed and it worked fine."

I'd suggest you simply purchase more of this same media...

You might want to consider that purchasing low quality (undoubtedly, inexpensive) media is not saving you money, if you can't burn them successfully.

**DKeith2011** · 16 May 2005, 11:03 AM

That is the same media as the straggler that worked for one copy. Maybe that was just a lucky disk.

Im currently updating Nero (very slow DL) and will try the firmware update if it doesnt help.

If that doesnt work, guess I'll go hunting for better media.

Burning problem ATAPI DVD DD 2X16X4X16

Burning problem ATAPI DVD DD 2X16X4X16

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment