Error Burning.......Internal Target Failure it hink

[not_so_hotmale]

Hi im not sure whats going on but ususly i have no problem copying dvd's with dvd shrink but lately on a few dvds ive been getting these burning errors.......itle start burning get to 5% then stop....i think it said somthing about internal burning failure.. . im not sure here is the log file....


Nero Serial Removed*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 5:33:44 PM
Nero API version: 6.3.1.26
Using interface version: 6.3.1.4
Installed in: D:\Nero\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <hl-dt-st dvdram="" gsa-4163b="">Version: A102 - HA 1 TA 1 - 6.3.1.26
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8400B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8400B E: CDRom0
HL-DT-ST DVDRAM GSA-4163 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048032kB)
Free physical memory: 679MB (695488kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.8.2005
NeroAPI
1:34:24 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

1:34:24 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

1:34:24 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

1:34:24 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

1:34:24 PM #5 Text 0 File Writer.cpp, Line 124
Writer HL-DT-ST DVDRAM GSA-4163B running

1:34:24 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:34:24 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:34:24 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:34:24 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

1:37:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2253247 (500:43.22, 4400MB)

1:37:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

1:37:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

1:37:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD+R9 Double Layer.)

1:37:02 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2253248 (2253248) = #2253248/500:43.23
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253248 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

1:37:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4614651904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2253248 | lead-out | 1 | 0x00 | 0x41

1:37:02 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

1:37:02 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

1:37:02 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

1:37:02 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)

1:37:02 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:37:02 PM #21 Text 0 File DVDR.cpp, Line 2020
Recording mode: Sequential Recording Mode for Multisession

1:37:02 PM #22 Text 0 File Mmc.cpp, Line 20698
Set BUFE: supported -> ON

1:37:02 PM #23 Text 0 File DVDR.cpp, Line 2161
Start write address at LBA 0
DVD high compatibility mode: No

1:37:02 PM #24 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1:37:02 PM #25 Text 0 File DVDR.cpp, Line 4643
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

1:37:54 PM #26 SCSI -1061 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x013D0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x8C
CDB Data: 0x2A 0x00 0x00 0x01 0xBD 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x32 0x32 0x00 0x0C 0x44 0x8C

1:37:54 PM #27 CDR -1061 File Writer.cpp, Line 304
Internal target failure

1:37:54 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:37:54 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

1:37:55 PM #30 Text 0 File DVDR.cpp, Line 2403
EndDAO: Last written address was 114143

1:37:55 PM #31 Phase 133 File APIProgress.cpp, Line 273
Writing short lead-out

1:38:17 PM #32 SCSI -1093 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x37 0x20 0x00 0x0C 0x02 0x00

1:38:17 PM #33 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x5B 0x01 0x00 0x0C 0x72 0x04

1:38:17 PM #34 Text 0 File DVDR.cpp, Line 4643
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request: DVD+R
Book Type setting not supported for the loaded disc type

1:38:17 PM #35 CDR -1061 File WriterStatus.cpp, Line 164
Internal target failure
HL-DT-ST DVDRAM GSA-4163B\H1 T1

1:38:17 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

1:38:17 PM #37 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)

1:38:17 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

1:38:17 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)</not></atapi></hl-dt-st>

[LT. Columbo]

"Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type"

"Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R"

you can't do this with your media (dvd-r)

[not_so_hotmale]

i dont understand what you meen? ..........ive always burnt with dvd-r ..if thats what you meen

[cynthia]

Found this one another board:

Hello, I had the same with a LG 4182B with Nero.

NOTE: This is only valid if you updated to sp2 recently or installed windows xp with sp2 included.

--- Step 1 --- DISABLE IMAPI ---
Open Control Panel, then open Administration Tools (advanced mode of Control Panel) and open Services.

Locate "IMAPI CD-Burning COM Service", and disable it.

--- Step 2 --- REMOVE NERO ---
Open Control Panel, then Add/Remove Programs, select Nero then press Remove.

--- Step 3 --- INSTALL LATEST ASPI DRIVERS ---
Adaptec ASPI Drivers Downlaod

Then Unzip and Install (Run aspiinst.exe)

Then Reboot your computer

--- Step 4 --- REINSTALL NERO ---
Do I really need to explain this?

This should work, if not find another solution LOL

http://www.computerforum.com/showthr...threadid=15576

[LT. Columbo]

when you hit back-up, look under the burn settings tab, is "book type dvd-rom" ticked?

as a side note: with that media i'd burn no higher than 4x.

[not_so_hotmale]

i usually burn with it ticked on and its fine.........and i tried with it ticked off and still nothing...............should i worry about the other one too? the burn 30mm dvd+ or w/e it is?

ive just updated my nero could that be the problem? i dont kno wwhy it would be tho.....i usually never have trouble burning

[not_so_hotmale]

im also trying the solution givin by cynthia right now so hopfully that works........im sick in tired of making coasters

[not_so_hotmale]

unfortunitly cynthias solution didnt work nor did updating nero.........and i have once again an other coaster :s by using dvd+r disks........would that solve the problem?

[LT. Columbo]

do you have a log by chance still of a successful burn with that media?

the least recent are the highest in nerohistory.log

"by using dvd+r disks........would that solve the problem?"

i might....but you shouldn't have to do this.

[cynthia]

I you have a RW disc - try to use that one until you solved your problems.

[LT. Columbo]

indeed, everyone who burns dvd's should have at least one.

[not_so_hotmale]

no i dont have any recent successfull log :S my last 5 burns have failed

[LT. Columbo]

for some reason nero is requesting book type change to +. try a + disc to see if you get a successful burn if you can't get a rw+

[not_so_hotmale]

ive just been thinking.......i recently was using diffrent discs......and i noticed that its only been recently ive tried using memorex dvd's and allt hese problems have been happening, maybe using a diffrent brand of dvd would work?

[LT. Columbo]

"Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1"

that would explain your problem if you just started using the (-) discs, from the + type....