I recently acquired (rather than purchased!) a new I/O Magic DVD burner. The label on the burner is MagicSpin. I realize this is certainly not top-of-the-line. In fact, I'm sure it's somewhere near the bottom. Nonetheless, I've got it.
I picked up some Maxell 2x DVD-RW discs and some Maxell 8x DVD-R to try out.
The drive came bundled with Nero and I also downloaded and tried ImgToolBurn. Errors all the way around. I've only tried burning the DVD-RW discs (I hesitate to ruin one of the DVD-Rs).
Here is the logfile from the last burn attempt.
============================================
Log date: Tue Oct 11 05:55:50 2005
============================================
Project: CIC
============================================
Using ImgTool Version 1.2.0
Can't open INI file (C:\Program Files\ImgTool Burn\ImgTool.ini),
using default settings...
Opening NeroAPI.DLL
Nero API version 6.3.1.25
Initialization of the NeroAPI successful.
Found the following devices:
DVDRW IDE 16X
Image Recorder
=========================================
Starting Burn Process...
=========================================
Using Device "DVDRW IDE 16X "
Using ISO Flags: ISO UDF Realloc DVD CMPT
==============================
try to building DVD ISO Tree...
==============================
Start path: "C:\Documents and Settings\David\Desktop\CiC"
AUDIO_TS dir is not present, try to create one...
VIDEO_TS dir present...
==============================
building VIDEO_TS Tree...
==============================
Adding VIDEO_TS.IFO
Adding VIDEO_TS.VOB
Adding VIDEO_TS.BUP
Adding VTS_01_0.IFO
Adding VTS_01_1.VOB
Adding VTS_01_2.VOB
Adding VTS_01_0.BUP
Adding files in directory "C:\Documents and Settings\David\Desktop\CiC"...
Writing on DVD Media...
Using Speed: 2.0x (2770kB/s)
===> DVD-Video files reallocation started
===> DVD-Video files reallocation completed (no file modified)
===> DVD-Video files sorted
=> Reading directories
=> Creating directories
=> Finishing
=> Reading directories
=> Creating directories
=> Checking discs
=> Writing to cache
===> Caching of files started
===> Caching of files completed
=> Writing to disc
===> Burn process started at 2x (2,770 KB/s)
=> Writing Lead-in
===> Queue again later
DVDRW IDE 16X\H1 T0
===> Write error
===> Could not perform end of Disc-at-once
===> Burn process failed at 2x (2,770 KB/s)
Nero Serial Removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.25
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE 16X> Version: A188 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE 16X D: CDRom0
HL-DT-ST CD-RW GCE-8483B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 124MB (127816kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.10.2005
NeroAPI
9:45:11 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
9:45:11 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
9:45:11 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
9:45:11 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
9:45:11 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:45:11 PM #6 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
9:45:11 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:45:11 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:45:11 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media
9:45:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1045631 (232:21.56, 2042MB)
9:45:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
9:45:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE 16X, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
9:45:12 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:45:12 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1045632 (1045632) = #1045632/232:21.57
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1045632 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
9:45:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2141454336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1045632 | lead-out | 1 | 0x00 | 0x41
9:45:12 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
9:45:12 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
9:45:12 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
9:45:12 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)
9:45:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:45:12 PM #21 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
9:45:12 PM #22 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON
9:45:12 PM #23 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
9:45:12 PM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:45:22 PM #25 Text 0 File Cdrdrv.cpp, Line 1297
21:45:22.953 - DVDRW IDE 16X\H1 T0 : Queue again later
9:48:22 PM #26 CDR -25 File Writer.cpp, Line 304
Queue again later
DVDRW IDE 16X\H1 T0
9:48:22 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:48:23 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:48:23 PM #29 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 607
9:50:15 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
9:50:15 PM #31 CDR -1135 File WriterStatus.cpp, Line 164
Write error
9:50:15 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
9:50:15 PM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)
9:50:15 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
9:50:15 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 3:02:55 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Error: Burn failed.
Logfile saved at: Tue Oct 11 05:55:50 2005
-----------------------------------------
Any ideas??
Thanks!
I picked up some Maxell 2x DVD-RW discs and some Maxell 8x DVD-R to try out.
The drive came bundled with Nero and I also downloaded and tried ImgToolBurn. Errors all the way around. I've only tried burning the DVD-RW discs (I hesitate to ruin one of the DVD-Rs).
Here is the logfile from the last burn attempt.
============================================
Log date: Tue Oct 11 05:55:50 2005
============================================
Project: CIC
============================================
Using ImgTool Version 1.2.0
Can't open INI file (C:\Program Files\ImgTool Burn\ImgTool.ini),
using default settings...
Opening NeroAPI.DLL
Nero API version 6.3.1.25
Initialization of the NeroAPI successful.
Found the following devices:
DVDRW IDE 16X
Image Recorder
=========================================
Starting Burn Process...
=========================================
Using Device "DVDRW IDE 16X "
Using ISO Flags: ISO UDF Realloc DVD CMPT
==============================
try to building DVD ISO Tree...
==============================
Start path: "C:\Documents and Settings\David\Desktop\CiC"
AUDIO_TS dir is not present, try to create one...
VIDEO_TS dir present...
==============================
building VIDEO_TS Tree...
==============================
Adding VIDEO_TS.IFO
Adding VIDEO_TS.VOB
Adding VIDEO_TS.BUP
Adding VTS_01_0.IFO
Adding VTS_01_1.VOB
Adding VTS_01_2.VOB
Adding VTS_01_0.BUP
Adding files in directory "C:\Documents and Settings\David\Desktop\CiC"...
Writing on DVD Media...
Using Speed: 2.0x (2770kB/s)
===> DVD-Video files reallocation started
===> DVD-Video files reallocation completed (no file modified)
===> DVD-Video files sorted
=> Reading directories
=> Creating directories
=> Finishing
=> Reading directories
=> Creating directories
=> Checking discs
=> Writing to cache
===> Caching of files started
===> Caching of files completed
=> Writing to disc
===> Burn process started at 2x (2,770 KB/s)
=> Writing Lead-in
===> Queue again later
DVDRW IDE 16X\H1 T0
===> Write error
===> Could not perform end of Disc-at-once
===> Burn process failed at 2x (2,770 KB/s)
Nero Serial Removed
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.25
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE 16X> Version: A188 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE 16X atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDRW IDE 16X D: CDRom0
HL-DT-ST CD-RW GCE-8483B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 124MB (127816kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.10.2005
NeroAPI
9:45:11 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
9:45:11 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
9:45:11 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
9:45:11 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
9:45:11 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:45:11 PM #6 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running
9:45:11 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:45:11 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:45:11 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media
9:45:12 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1045631 (232:21.56, 2042MB)
9:45:12 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
9:45:12 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: DVDRW IDE 16X, Media type: DVD-RW
Disc Manufacturer: RITEKW - 01
Disc Application Code: 64, Disc Physical Code: 214
9:45:12 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:45:12 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1045632 (1045632) = #1045632/232:21.57
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1045632 blocks [DVDRW IDE 16X ]
--------------------------------------------------------------
9:45:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2141454336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1045632 | lead-out | 1 | 0x00 | 0x41
9:45:12 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
9:45:12 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
9:45:12 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
9:45:12 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)
9:45:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:45:12 PM #21 Text 0 File DVDR.cpp, Line 2000
Recording mode: Sequential Recording Mode
9:45:12 PM #22 Text 0 File Mmc.cpp, Line 20660
Set BUFE: Super Link -> ON
9:45:12 PM #23 Text 0 File DVDR.cpp, Line 2141
Start write address at LBA 0
DVD high compatibility mode: Yes
9:45:12 PM #24 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: 2
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:45:22 PM #25 Text 0 File Cdrdrv.cpp, Line 1297
21:45:22.953 - DVDRW IDE 16X\H1 T0 : Queue again later
9:48:22 PM #26 CDR -25 File Writer.cpp, Line 304
Queue again later
DVDRW IDE 16X\H1 T0
9:48:22 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
9:48:23 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
9:48:23 PM #29 Text 0 File DVDR.cpp, Line 2383
EndDAO: Last written address was 607
9:50:15 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
9:50:15 PM #31 CDR -1135 File WriterStatus.cpp, Line 164
Write error
9:50:15 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
9:50:15 PM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)
9:50:15 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
9:50:15 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 11/1/2004 3:02:55 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Error: Burn failed.
Logfile saved at: Tue Oct 11 05:55:50 2005
-----------------------------------------
Any ideas??
Thanks!
Comment