Problems burning with Nero

**vw56german** · 29 Oct 2005, 08:42 AM

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

The drive is not recognizing the media, could be your firmware is out of date or some badk discs in the latest batch you bought. I looked at the "codeguys" website, (see link in the FAQ's) and there is a BYS3 firmware available.

**jm1647** · 29 Oct 2005, 10:56 AM

Info gathering was conducted here by a retired user here named setarip. it seems the Nero Log never shows the media code for -R media. If I rememebr correctly only once did a partial code show in a log posted by cynthia.

@andrew2112 - In addition to the fw update you might also consider running Force Aspi to install the aspi driver. it is available here

**Chewy** · 29 Oct 2005, 12:05 PM

"22:43:55 #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc"
and this is the exact same media you used before(same batch)?

**andrew2112** · 30 Oct 2005, 09:20 PM

Thanks for all of your suggestions so far. I have updated the firmware to BYS3 by flashing the drive and loaded force ASPI. I have always used the same media and the current batch have been successfully used many times over. I have also tired some other media today but they also produced the illegal disc message. Do you have any other suggestions? I have copied below the latest log.

Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17:35:34
Nero API version: 6.6.0.16
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 16b
Recorder: <SONY DVD RW DW-D22A> Version: BYS3 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00GVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D22A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-D22A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522732kB)
Free physical memory: 123MB (126720kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.10.2005
NeroAPI
11:03:22 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

11:03:22 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

11:03:22 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

11:03:22 #4 Text 0 File Reader.cpp, Line 127
Reader running

11:03:22 #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

11:03:22 #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D22A running

11:03:22 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:03:22 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

11:03:22 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

11:03:22 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1185679 (263:29.04, 2315MB)

11:03:22 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

11:03:22 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DW-D22A, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 193

11:03:22 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:03:22 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1185680 (1185680) = #1185680/263:29.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1185680 blocks [SONY DVD RW DW-D22A]
--------------------------------------------------------------

11:03:22 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DW-D22A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2428272640, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1185680 | lead-out | 1 | 0x41 | 0x00

11:03:23 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

11:03:23 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

11:03:23 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

11:03:23 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)

11:03:23 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:03:23 #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode

11:03:23 #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

11:03:23 #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: Yes

11:03:23 #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:03:48 #25 Text 0 File Cdrdrv.cpp, Line 1286
11:03:48.968 - SONY DVD RW DW-D22A\H1 T0 : Queue again later

11:07:33 #26 SCSI -1046 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B580000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x3B 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

11:07:33 #27 CDR -1046 File Writer.cpp, Line 311
Illegal disc

11:07:33 #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:07:33 #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:07:33 #30 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was 15327

11:07:34 #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 4x (5,540 KB/s)

11:07:34 #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

11:07:34 #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

11:07:37 #34 SCSI -1080 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBE0200
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x3A 0x00

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 10/05/2005 15:04:10 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**blutach** · 30 Oct 2005, 09:42 PM

See #1, 3, 5 & 6 here. Your ASPI is verrrrry old but Nero uses its own anyway, IIRC.

Have you tried burning with DVD Decrypter?

Regards

**andrew2112** · 30 Oct 2005, 09:56 PM

Thanks for the reply Les. I have tried dvd decrypter but get the same problem. Should I remove the ASPI?

**blutach** · 30 Oct 2005, 09:58 PM

I'd update it, if you can. Didn't jm give you a link to the latest? But, it could be the drive. Tried cleaning it?

Regards

**andrew2112** · 30 Oct 2005, 10:03 PM

I have justed run the ASPI check and I have version 4.6. This was obtained from the link that JM provided. Is there a more upto date version available. Yes I have cleaned the drive. Still no luck. This is so frustrating.

**blutach** · 30 Oct 2005, 10:21 PM

I think the latest is 4.71 something or rather.

You may have some bad media in that batch. IOt happens. Go and get something else - some Taiyo Yudens or Verbatims....real high quality stuff.

Regards

**Chewy** · 30 Oct 2005, 10:26 PM

Physical memory : 510MB (522732kB)
Free physical memory: 123MB (126720kB)
Memory in use : 75 %
free up a little more(it's not that you need it) but the more stuff
you have running in the background, the greater the chance of conflicts.

**ldw** · 31 Oct 2005, 01:28 AM

Originally Posted by andrew2112

I have justed run the ASPI check and I have version 4.6. This was obtained from the link that JM provided.

4.60 is the version always recommended in the forums at CDFreaks, they always recommend to run KillAspi to remove 4.71 and install 4.60. I assume that's the reason why JM provided that specific link. I have it installed too and it is working fine, more than six months now.

Leo

**andrew2112** · 31 Oct 2005, 09:36 AM

Please can anyone help. I am still having problems. I have tried some verbatim discs and still cannot get past 2% before it crashes telling me I am using an illegal disc.

**andrew2112** · 31 Oct 2005, 09:53 AM

I don't know if this will help anyone give me some advice but I have had no problem burning cds or a dvd rw using shrink and nero. My only problem is with -r discs.

**blutach** · 31 Oct 2005, 10:08 AM

Have you tried +Rs? Have you tried burning with ImgBurn or DVD Decrypter?

And thanks ldw - I'll remember that

Regards

Problems burning with Nero

Problems burning with Nero

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment