Problems burning with Nero

[LT. Columbo]

CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: Off

fix the DMA then try again, otherwise try sony dvd-r discs at 2x or 4x.

http://forum.digital-digest.com/showthread.php?s=&threadid=44808

[idiotbox12]

I don't know why it is saying off I have

Primary IDE channel

device 0: DMA if available

ultra DMA Mode 5

device 1: DMA if Available

Not applicable


Secondary IDE channel

Device 0: Dma if available

Ultra DMA mode 2

Device 1 DMA if Available

PIO Mode.



Now I have up to date firmware, I have tried switching the master and the slave, I dunno what or how to do the BIOS thing. we discovered through earlier trouble shooting the secondary device 1 doesn't switch from PIO mode. I am almost out of hope is it the Burner that is bad or is there anything else you guys can help me with? do I need to reformat =(

[idiotbox12]

Nero Serial Removed*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
LITE-ON DVDRW SOHW-1633S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 509MB (522224kB)
Free physical memory: 168MB (172764kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

3.11.2005
Burn DVD Image
7:26:19 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

7:26:19 PM #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1633S running

7:26:19 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

7:26:19 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286018 (508:00.18, 4464MB)

7:26:19 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

7:26:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

7:26:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:26:19 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286019 (2286019) = #2286019/508:0.19
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286019 blocks [LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------

7:26:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681766912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286019 | lead-out | 1 | 0x41 | 0x00

7:26:19 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:26:19 PM #11 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

7:26:19 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:26:19 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

7:26:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:26:19 PM #15 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

7:26:19 PM #16 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

8:09:14 PM #17 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286019 (22E1C3h), lenght 0 blocks

8:09:14 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:09:42 PM #19 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 10/24/2004 10:07:38 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======



I am not gonna try to figure out what went wrong with my other disk, what a waste of a hundred pack!!!!

[2COOL]

CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: Off

DMA needs to be turned on. Your burner is still in PIO mode. "atapi Port 1"= "Secondary IDE Channel" and "ID 1" = "Device 1".

Relevant information.

Primary IDE channel

device 0: DMA if available

ultra DMA Mode 5

device 1: DMA if Available

Not applicable


Secondary IDE channel

Device 0: Dma if available

Ultra DMA mode 2

Device 1 DMA if Available

PIO Mode.

7:26:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0

Personally, CMC MAG is not so good. I'm a authentic Taiyo Yuden person myself. Though reputable users claim it works flawlessly for them.

[jm1647]

Here is a scan of a burn I did on my 1633s with the BSOS fw using CMC MAGE01 media. I don't remember the burn speed 4x or 8x but it looks good.

Media compatability all lies in the burner and it's firmware.

[Chewy]

@idiotbox12
It's not a good idea to have a dvd burner slaved to a lesser drive.
Try disconnecting the dvd-rom drive and connect end of cable to burner and
jumper as master, then do the dma fix as specified by LT and blu!
Some drives will never share a cable, I have had computers that wouldn't even boot with 2 drives made by the same company.

droll chewy

[idiotbox12]

@idiotbox12
It's not a good idea to have a dvd burner slaved to a lesser drive.
Try disconnecting the dvd-rom drive and connect end of cable to burner and
jumper as master, then do the dma fix as specified by LT and blu!
Some drives will never share a cable, I have had computers that wouldn't even boot with 2 drives made by the same company.

droll chewy

I am sorry not very computer savy, by this did you just want me to switch the Burner back to master? or is there something else I must do that you are referring to?

[blockie]

maybe similar problem

I'm attempting to just ask a question potentially similar to this one already without having to start a new post. DVD Decrypter does its thing fine, loads into shrink fine but when it goes to burn and analyze the disc or "checking" the disc it freezes and I have to try restarting the computer. I've used shrink for over 75 movies so far and all of a sudden its screwed. I'm running a Taiyo yuden media with a plextor 708-A. I tried grabbing the log from nero but it enver gets that far in the burning process to even start one. does anyone have any suggestions? I'll try updating my firmware etc for my drive but I've tried that a while back and it still does it.

hope someone can help.

thanks.

[LT. Columbo]

have you read here?

http://forum.digital-digest.com/showthread.php?s=&threadid=45726

[Chewy]

I am sorry not very computer savy, by this did you just want me to switch the Burner back to master? or is there something else I must do that you are referring to?

put the burner as master, leave the other drive disconnected

fix dma and see if it stays fixed

You are trying to isolate a problem by eliminating variables.

[notcool]

I am also having trouble burning with nero

I am a new user of dvd shrink and nero. Everything seems to work great until nero starts writing the lead out. It seems to try to burn the lead out but then I have the following problem. Any advice would be wonderful. Thank you in advance!!


Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 6:33:42 PM
Nero API version: 6.3.1.29
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <Memorex DVD16+/-DL4RWlD2>Version: JWS5 - HA 2 TA 0 - 6.3.1.29
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST330013A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-248F D: CDRom0
Memorex DVD16+/-DL4RWlD2 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523264kB)
Free physical memory: 194MB (199364kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.11.2005
NeroAPI
1:49:05 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

1:49:05 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

1:49:05 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

1:49:06 PM #4 Text 0 File Reader.cpp, Line 126
Reader running

1:49:06 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:49:06 PM #6 Text 0 File Writer.cpp, Line 124
Writer Memorex DVD16+/-DL4RWlD2 running

1:49:06 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:49:06 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:49:06 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media

1:49:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1735423 (385:38.73, 3389MB)

1:49:38 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO

1:49:38 PM #12 Text 0 File DlgWaitCD.cpp, Line 2161
Recorder: Memorex DVD16+/-DL4RWlD2, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

1:49:38 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

1:49:38 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1735424 (1735424) = #1735424/385:38.74
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1735424 blocks [Memorex DVD16+/-DL4RWlD2]
--------------------------------------------------------------

1:49:38 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [Memorex DVD16+/-DL4RWlD2] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3554148352, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1735424 | lead-out | 1 | 0x00 | 0x41

1:49:38 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

1:49:38 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

1:49:38 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

1:49:38 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 8x (11,080 KB/s)

1:49:38 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:49:38 PM #21 Text 0 File DVDR.cpp, Line 2222
Recording mode: Sequential Recording Mode

1:49:38 PM #22 Text 0 File Mmc.cpp, Line 20945
Set BUFE: supported -> ON , Generic write control : ON

1:49:38 PM #23 Text 0 File DVDR.cpp, Line 2363
Start write address at LBA 0
DVD high compatibility mode: Yes

1:49:38 PM #24 Text 0 File Cdrdrv.cpp, Line 8219
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

1:50:33 PM #25 Text 0 File Cdrdrv.cpp, Line 1296
13:50:33.187 - Memorex DVD16+/-DL4RWlD2\H2 T0 : Queue again later

1:56:39 PM #26 Text 0 File WriterStatus.cpp, Line 115
<Memorex DVD16+/-DL4RWlD2> start writing Lead-Out at LBA 1735424 (1A7B00h), lenght 0 blocks

1:56:39 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:56:39 PM #28 Text 0 File DVDR.cpp, Line 2606
EndDAO: Last written address was 1735423

1:58:20 PM #29 SCSI -1194 File Cdrdrv.cpp, Line 1190
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x04
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x04

1:58:20 PM #30 CDR -1194 File ThreadedTransferInterface.cpp, Line 1708
PMA update failure

1:58:20 PM #31 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

1:58:20 PM #32 Text 0 File DVDR.cpp, Line 2606
EndDAO: Last written address was -1

1:58:20 PM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)

1:58:20 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

1:58:20 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 10/31/2005 10:47:03 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[LT. Columbo]

6.3.1.29

update to nero 6.6.0.16 it's free

http://www.nero.com/us/nero-up.php

Disc Manufacturer: RITEKG - 05

these media specifically is known to cause problems. try sony, verbatim etc.

read here:

http://forum.digital-digest.com/showthread.php?s=&threadid=49635

1:58:20 PM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 8x (11,080 KB/s)

slow the burn speed to 2x or 4x.

Version: JWS5

update your firmware to JWS6

http://forum.rpc1.org/dl_firmware.php?download_id=2082

[notcool]

Thanks so much Lt. Columbo

I updated nero and slowed the burn speed. Everything is working out great so far. Was too much of a dummy to update the firmware so thank goodness I didn't have to. Thanks again.

[jm1647]

Updating the firmware could allow you to burn at faster speeds if you wanted to. Some people are satisified at 4x or 2x.

[LT. Columbo]

notcool

I updated nero and slowed the burn speed. Everything is working out great so far. Was too much of a dummy to update the firmware so thank goodness I didn't have to. Thanks again.

way to go! if you ever have problems again, right off the bat update the firmware, if you need help doing so this is the place.