DvdShrink Burning Problems

[squeaker]

Hi need some help if possible,ihave been using dvd shrink for over a year with no problems but now everytime i burn a dvd it gets right to the end of session saying writing lead out,then error message pops up saying burn failed cannot finalyze disk or cannot close disc at once have wasted 6 discs so far.
Any suggestions please.

[cornholio7]

have you bought new discs recently

[squeaker]

yea tryed 2 different sorts been using for ages but only just got probs

[Chewy]

what's your burning software?

[squeaker]

nero

[Chewy]

mycomputer/c/programfiles/ahead/nero/nerohistory log
at the bottom is your last burn
copy and paste that part in reply

[squeaker]

Is this what you need
13:05:17 #33 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
Session fixation error
LITE-ON DVDRW LDW-451S\H1 T0

13:05:17 #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

13:05:17 #35 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1

13:05:17 #36 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

13:05:17 #37 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)

13:05:17 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

13:05:17 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 29/08/2002 12:00:00
File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 17/12/2002 11:32:46
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 22/04/2005 00:14:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[21.12.2005]------------------------------------
12:41:47 Robot error messages from:
====== *** NeroAPI, History File *** ======

[Chewy]

start at the last
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e

and on to end

[squeaker]

Is this ok
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW LDW-451S> Version: GSB6 - HA 1 TA 0 - 6.3.1.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400EB-11CPF0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LDW-451S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW LDW-451S D: CDRom0
SONY DVD-ROM DDU1613 E: CDRom1
AXV CD/DVD-ROM H: CDRom2
CD-RW CDR-6S52 F: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 638MB (653700kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

21.12.2005
NeroAPI
12:41:47 #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

12:41:47 #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

12:41:47 #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

12:41:47 #4 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x070B6000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

12:41:48 #5 Text 0 File Reader.cpp, Line 118
Reader running

12:41:48 #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW LDW-451S running

12:41:48 #7 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:41:48 #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:41:48 #9 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:41:48 #10 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

12:41:48 #11 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1768335 (392:57.60, 3453MB)

12:41:48 #12 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

12:41:48 #13 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: LITE-ON DVDRW LDW-451S, Media type: DVD-R
Disc Manufacturer: TTG01 -
Disc Application Code: 64, Disc Physical Code: 193

12:41:48 #14 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:41:48 #15 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1768336 (1768336) = #1768336/392:57.61
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1768336 blocks [LITE-ON DVDRW LDW-451S ]
--------------------------------------------------------------

12:41:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW LDW-451S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3621552128, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1768336 | lead-out | 1 | 0x00 | 0x41

12:41:49 #17 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

12:41:49 #18 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

12:41:49 #19 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

12:41:49 #20 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2x (2,770 KB/s)

12:41:49 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:41:49 #22 Text 0 File DVDR.cpp, Line 1879
Recording mode: Sequential Recording Mode

12:41:49 #23 Text 0 File Mmc.cpp, Line 20401
Set BUFE: supported -> ON , SMART-BURN : ON

12:41:49 #24 Text 0 File DVDR.cpp, Line 2020
Start write address at LBA 0
DVD high compatibility mode: Yes

12:41:49 #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:41:49 #26 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

12:42:03 #27 Text 0 File Cdrdrv.cpp, Line 1294
12:42:03.109 - LITE-ON DVDRW LDW-451S\H1 T0 : Queue again later

13:04:42 #28 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW LDW-451S > start writing Lead-Out at LBA 1768336 (1AFB90h), lenght 0 blocks

13:04:42 #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

13:04:43 #30 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was 1768335

13:05:17 #31 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x02
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x02

13:05:17 #32 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

13:05:17 #33 CDR -1176 File ThreadedTransferInterface.cpp, Line 1708
Session fixation error
LITE-ON DVDRW LDW-451S\H1 T0

13:05:17 #34 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1708
Could not perform end of Disc-at-once

13:05:17 #35 Text 0 File DVDR.cpp, Line 2256
EndDAO: Last written address was -1

13:05:17 #36 SCSI -1066 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x09234000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xDF 0x00 0x0F 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00

13:05:17 #37 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 2x (2,770 KB/s)

13:05:17 #38 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

13:05:17 #39 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 29/08/2002 12:00:00
File 'Drivers\CDRALW2K.SYS': Ver=5.3.4.21, size=23436 bytes, created 17/12/2002 11:32:46
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 22/04/2005 00:14:00 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


[21.12.2005]------------------------------------
12:41:47 Robot error messages from:
====== *** NeroAPI, History File *** ======

[Chewy]

well squeaker, having the burner as slave to the hard drive is not a good idea.
what brand of media was that you used last?
You'll need to update nero.
package 1

http://www.nero.com/nero6/enu/nero-up.php

for starters

[squeaker]

Used Bulkpaq dvdr Blue Label
Also have`nt changed any drives this how it came from manafacturer did have a dvd rom fitted at shop could they have done it and how do i alter it if needed
thanks

[squeaker]

How do i change it only have basic knowlede on this subject
thanks

[Chewy]

there's a little more to come, don't worry for now.
do the nero update, that's critical
be looking for better media, ricoh is good in UK

[squeaker]

Thanks have now updated nero also could you tell me how to change cables on drives and what firmware version to download.

[Chewy]

good news, there's new firmware and yours is way too old,
might be a lot of the problem, however I would switch the cables,
drives first before flashing.

anyway download the newest one for your drive

http://forum.rpc1.org/dl_firmware.php?download_id=1735