DvD would not burn at all

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jaxer
    Junior Member
    Junior Member
    • Mar 2006
    • 9

    DvD would not burn at all

    Hi this is my first post here. I'm having difficulties burning some of my movies. I tried using Nero recode 2 and the burning would not start. I keep geting an error messages such as i need to put a blank dvd when i did. So i try using Nero burning rom and pretty much got the same error message. I followed the instruction post here to burn my movie, but without success.

    Basically, i used dvd shrink to store movies in my hard drive. The movies in my hard drive played well with my power dvd. The dvd media i am using is Memorex DVD+R. The DVD burner i'm using is emprex.

    I'm not sure what im doing wrong, can someone explain what i can do about this? I have tried buring other stuff using a cdr and cdrw, but i can't burn movies onto my dvd+r.

    Here's the log the last time i tried buring using Nero burning Rom.

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
    NT-SPTI used
    Nero Version: 7.0.1.4
    Internal Version: 7, 0, 1, 4
    Recorder: <DVDRW IDE1004> Version: 0043 - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <DVDRW IDE1004 >Version: 0043 - HA 1 TA 0 - 7.0.1.4
    Adapter driver: <IDE> HA 1
    === Scsi-Device-Map ===
    DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : DVDRW IDE1004 atapi Port 3 ID 0 DMA: Off
    CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 3 ID 1 DMA: On
    === CDRom-Device-Map ===
    DVDRW IDE1004 D: CDRom0
    SAMSUNG CD-R/RW SW-252S E: CDRom1
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1021MB (1046512kB)
    Free physical memory: 537MB (550824kB)
    Memory in use : 47 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    25.2.2006
    UDF/ISO compilation
    9:58:06 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
    DVD-Video files reallocation started

    9:58:06 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
    DVD-Video files reallocation completed (no file modified)

    9:58:06 PM #3 Text 0 File Isodoc.cpp, Line 6411
    UDF document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    UDF Mode : UDF/ISO bridge
    UDF Revision : 1.02
    UDF Partition Type : physical
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    9:58:06 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
    DVD-Video files sorted

    9:58:06 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 81920KB of Memory

    9:58:06 PM #6 Text 0 File Reader.cpp, Line 124
    Reader running

    9:58:06 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    9:58:06 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)

    9:58:06 PM #9 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media

    9:58:07 PM #10 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2286127 (508:01.52, 4465MB)

    9:58:07 PM #11 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)

    9:58:07 PM #12 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: DVDRW IDE1004, Media type: DVD+R
    Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
    Disc Application Code: 0, Extended Information Indicators: 7

    9:58:07 PM #13 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    9:58:07 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [D: DVDRW IDE1004]
    --------------------------------------------------------------

    9:58:07 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [D: DVDRW IDE1004] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2286128 | lead-out | 1 | 0x41 | 0x00

    9:58:27 PM #16 Text 0 File SCSIPassThrough.cpp, Line 58
    Error on LockVolume: Incorrect function.

    9:58:27 PM #17 Text 0 File SCSIPassThrough.cpp, Line 119
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    9:58:27 PM #18 Text 0 File Cdrdrv.cpp, Line 9597
    SPTIDismountVolume not successfull

    9:58:47 PM #19 Text 0 File SCSIPassThrough.cpp, Line 58
    Error on LockVolume: Incorrect function.

    9:58:47 PM #20 Phase 24 File dlgbrnst.cpp, Line 1725
    Caching of files started

    9:58:47 PM #21 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.

    9:58:47 PM #22 Phase 25 File dlgbrnst.cpp, Line 1725
    Caching of files completed

    9:58:47 PM #23 Phase 36 File dlgbrnst.cpp, Line 1725
    Burn process started at 4x (5,540 KB/s)

    9:58:47 PM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
    Buffer x0483d000: Len x4000

    9:58:47 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    9:58:47 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: R03
    Product revision number: 4
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
    23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
    01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

    9:59:06 PM #27 SPTI -1196 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x02
    CDB Data: 0x51 00 00 00 00 00 00 00 20 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
    Buffer x04759400: Len x20

    9:59:06 PM #28 SPTI -1196 File SCSIPassThrough.cpp, Line 323
    D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1196)
    Sense Key: 0x02 (KEY_NOT_READY)
    Sense Code: 0x3A
    Sense Qual: 0x02
    CDB Data: 0x52 01 00 00 00 FF 00 00 1C 00 00 00
    Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 3A 02
    Buffer x04759400: Len x1c

    9:59:06 PM #29 Text 0 File DVDPlusRW.cpp, Line 666
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    9:59:06 PM #30 CDR -1196 File ThreadedTransferInterface.cpp, Line 1799
    Disc not present - tray open
    D: DVDRW IDE1004

    9:59:06 PM #31 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1799
    Could not perform start of Disc-at-once

    9:59:06 PM #32 Phase 38 File dlgbrnst.cpp, Line 1725
    Burn process failed at 4x (5,540 KB/s)

    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=7.5.0.47 , size=24960 bytes, created 3/8/2005 9:08:42 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 2/1/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • benbryant
    Digital Video Master
    Digital Video Master
    • Aug 2005
    • 1314

    #2
    Hi Jaxer,

    CdRomPeripheral : DVDRW IDE1004 atapi Port 3 ID 0 DMA: Off
    Please enable DMA for your burner. Please follow the information from the link below:



    Recorder: Version: 0043 - HA 1 TA 0
    Your burner, DVDRW IDE1004 , firmware 0043 is very old. Please download the newest firmware, version 0251 from here:
    英群/鈺群企業累積了多年電子代工專業技能,專精EMS代工.SMT代工推薦,DIP,組裝.測試,包裝,OEM全製程服務,近年更因應全球環保意識,發展各式節能標章LED室內照明產品,未來將持續發展智能照明及其系統,營業項目包含停車場節能標章、節能補助led燈管推薦,燈具推薦,天井燈,無塵室黃光燈等,嚴格要求為客戶提供、推薦最優良的品質及最好的服務,成為客戶加工夥伴為我司努力目標



    Regards

    Comment

    • Jaxer
      Junior Member
      Junior Member
      • Mar 2006
      • 9

      #3
      I tried upgrading the firmware and can't. The message reads

      This firmaware can be used on below drives :
      (1) DVDRW IDE1004 .
      Check Sum: 406E
      Please wait a minute.....
      Execute command errorA!! 5/20/0
      Flashing is incoreect!!

      Am i'm doing something wrong?

      Comment

      • benbryant
        Digital Video Master
        Digital Video Master
        • Aug 2005
        • 1314

        #4
        It seems that there are quite a few people having the same problem with flashing the DVDRW IDE1004's firmware. Please read more information about that:


        Since we don't own a burner like your, it's impossible for us to download and test the firmware, and make a correct suggestion about that. Flashing firmware is also risky too and your drive can be damage by a bad flash. You have to decide yourself. If you do want to try the Dangerous Brothers RPC1 firmware, you can go to the link below and look for the "BTC DRW 1004IM (DVDRW IDE 1004)" and download and try the version 0051. Good luck


        Regards
        Last edited by benbryant; 4 Mar 2006, 12:59 PM.

        Comment

        • Jaxer
          Junior Member
          Junior Member
          • Mar 2006
          • 9

          #5
          If there some risk, then i guess i have to decline since the computer i using is not my. But thanks for trying to help out, i appreciate it.

          Comment

          • cynthia
            Super Moderatress
            • Jan 2004
            • 14278

            #6
            I wonder if it could be an I/O Magic burner you have. If so - here is the page for those firmwares:

            A leader in design and manufacturing of desktop and mobile technology products for over 20 years.

            Comment

            • Jaxer
              Junior Member
              Junior Member
              • Mar 2006
              • 9

              #7
              Sorry, but the burner i have is an Emprex.

              Comment

              • benbryant
                Digital Video Master
                Digital Video Master
                • Aug 2005
                • 1314

                #8
                Very sorry that at the beginning I thought your drive was BTC DRW 1004IM (DVDRW-IDE1004). That why I posted the link with the firmware version 0251. The last firmware version for Emprex DVDRW 1004IM (EDW4020) is 0051. You can download it here:



                Regards

                Comment

                • soup
                  Just Trying To Help
                  • Nov 2005
                  • 7524

                  #9
                  If you are worried, follow instructions but flash from safe mode. Make sure spyware is disabled.

                  Comment

                  Working...