Nero 7 New Problem-cannot burn large file

[gpsam]

I have been using Nero Ultra 7 for months but just ran into a problem yesterday when I tried to burn a 2 gig file to a Data DVD. I never had this happen before so I am not sure what caused this change. I get an error/message that says the compilation mode must be changed to burn the larger file. Nero 7 is supposed to automatically change when burning DVD from CD and I never had this come up before. I have reinstalled twice, tried to download and install the newest version but I am still getting the same message. If you move the file over in DVD Data copy mode it gives you the message and does not show the files size. I copied larger files before with no problem.

Has anyone run into this or have any suggestions.

[photo_angel2004]

post the failed burn log please.

[gpsam]

Nero 7 burn problem

I didn't have a log file so I just tried to burd two 2 gig files to a DVD to produce one. The only things that copied were a couple of small files that were in the folders.

Here is the log file.

__________________________________________________ __________



Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 6/7/2005 12:01:20 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2

Recorder: <LITE-ON DVDRW SOHW-832S> Version: VPDE - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 2 - 7.0.8.2
Adapter driver: <SCSI> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SV8004H atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD1600JB-00GVA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-832S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : VERBATIM 481248AL atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-832S E: CDRom0
VERBATIM 481248AL F: CDRom1
AXV CD/DVD-ROM G: CDRom2
Generic DVD-ROM H: CDRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 394MB (403616kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.3.2006
ISO compilation
4:32:30 PM #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:32:31 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

4:32:31 PM #3 Text 0 File Reader.cpp, Line 124
Reader running

4:32:31 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SOHW-832S running

4:32:31 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

4:32:31 PM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media

4:32:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 607 ( 0:08.07, 1MB)

4:32:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

4:32:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVDRW SOHW-832S, Media type: DVD+R

4:32:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:32:31 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 608 (608) = #608/0:8.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [E: LITE-ON DVDRW SOHW-832S]
--------------------------------------------------------------

4:32:31 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SOHW-832S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
608 | lead-out | 1 | 0x41 | 0x00

4:32:31 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

4:32:31 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:32:31 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started

4:32:31 PM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.

4:32:31 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed

4:32:31 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)

4:32:31 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:32:31 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x050b3600: Len x804

4:32:31 PM #21 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

4:32:54 PM #22 Text 0 File WriterStatus.cpp, Line 116
<E: LITE-ON DVDRW SOHW-832S> start writing Lead-Out at LBA 608 (260h), length 0 blocks

4:32:54 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:32:56 PM #24 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders

4:36:00 PM #25 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully

4:36:00 PM #26 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\CDR4VSD.SYS': Ver=2.3 (043), size=48384 bytes, created 11/24/1997 3:01:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 6/7/2005 12:01:20 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.12a, size=20576 bytes, created 2/26/2006 2:46:28 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 1, size=101760 bytes, created 9/7/2005 3:42:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 12:59:41 AM (Adapter driver for src)
File 'Drivers\scsiscan.sys': Ver=5.1.2600.0 (XPClient.010817-1148), size=10880 bytes, created 8/17/2001 12:53:26 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[photo_angel2004]

CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off

If you are burning DVD from CD you may want to turn ON the DMA

[gpsam]

Nero 7 burn problem

Thanks for the quick reply. These are files on my hard drive.

I have a feeling something happened in the way of a hack/virus because I have no access to any system restores previous to yesterday. I also noticed that the drive speed has been reduced to 2.4. This was always at 8 before.

[photo_angel2004]

is all of your firmaware up dated.

I know the basic stuff on reading the logs but there are some things in those logs that I dont really know a whole lot on maybe some that can read the log better then me can make more sense out of it for you.

[spuddog]

I believe that when you burn larger data files you need to use udf compilation instead of iso compilation. Its on the first page where it asks what type you what to use.

Scott

[gpsam]

Nero 7 Burn problem

The program used to do that automatically. I never had to make any changes before. I checked and there is no option for UDF. I belive there must have been a Win upgrade or some type of virus since I didn't change anything else.