help! illegal disc error???

[gvamp]

Yep it sure does it just won't burn, I've even tried making a data DVD to transfer to my notebook which has a DVD Burner in that and I got the same error when making the Data DVD.

[Chewy]

I should also like to note that I'm ripping a movie using DVDshrink, then running it through VobEdit then through Restream, finally through DVDAuthorGUI to add subtitles for it, normally I wouldn't have to run the file through Restream but I get an error if I don't.

So could this be the cause of my problem? Perhaps I should upgrade to Nero 7 which version of 7 would you suggest?

let's disregard all this as it has nothing at all to do with your problem

[Chewy]

would you post a nero log so we can see what to fix?

[dmanshead]

see this thread: http://forum.digital-digest.com/show...578#post222578 and use ImgBurn or DVDD

[Chewy]

see this thread: http://forum.digital-digest.com/show...578#post222578 and use ImgBurn or DVDD

that's a whole different problem with shrink and iso

imgburn doesn't do data disks yet

[gvamp]

Here is a copy of my log

name removed
home
Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM

NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d

Recorder: <LITE-ON DVDRW LDW-851S> Version: GS0P - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-ROM DVD-115 >Version: 1.11 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD2500JB-00EVA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-ROM DVD-115 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW LDW-851S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
PIONEER DVD-ROM DVD-115 D: CDRom0
LITE-ON DVDRW LDW-851S E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 577MB (590900kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

26.6.2006
UDF/ISO compilation
11:35:27 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started

11:35:28 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)

11:35:28 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

11:35:28 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted

11:35:28 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory

11:35:28 PM #6 Text 0 File Reader.cpp, Line 124
Reader running

11:35:28 PM #7 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-851S running

11:35:28 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:35:28 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)

11:35:28 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media

11:35:28 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2192879 (487:18.29, 4282MB)

11:35:28 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)

11:35:28 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW LDW-851S, Media type: DVD-R
Disc Manufacturer: FUJIFI - LM03
Disc Application Code: 64, Disc Physical Code: 193

11:35:28 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================

11:35:28 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2192880 (2192880) = #2192880/487:18.30
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2192880 blocks [LITE-ON DVDRW LDW-851S]
--------------------------------------------------------------

11:35:28 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW LDW-851S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4491018240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2192880 | lead-out | 1 | 0x41 | 0x00

11:35:28 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

11:35:28 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

11:35:28 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started

11:35:28 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.

11:35:28 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed

11:35:28 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)

11:35:28 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

11:35:28 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode

11:35:28 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes

11:35:28 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

11:35:47 PM #27 Text 0 File Cdrdrv.cpp, Line 1200
23:35:47.140 - E: LITE-ON DVDRW LDW-851S : Queue again later

11:39:33 PM #28 SPTI -1046 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 21 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x047c0000: Len x10000
0x00 00 01 BA 44 01 CC 72 4C 5F 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 0E C7 CC 37 A5 C7 65 0B 13
0x5D 2D B9 BC E4 61 62 61 87 00 BE 89 3F C0 7F E5

11:39:33 PM #29 CDR -1046 File Writer.cpp, Line 311
Illegal disc
E: LITE-ON DVDRW LDW-851S

11:39:33 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

11:39:33 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

11:39:33 PM #32 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was 8447

11:39:33 PM #33 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/20/2006 1:18:36 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Chewy]

that's a fairly old burner, with the latest firmware( Dec 04, 2004 )
but it supports those blanks

have you tried any other dvd blanks?

[gvamp]

Yep I've tried Sony's and I get the same problem.

[Chewy]

by process of elimination?

File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/20/2006 1:18:36 AM (Prassi/Veritas driver for win 2K)

driver from sonic/gear/easydvd?

http://softwareupdates.roxio.com/gm/support/tools/roxizap.exe

[gvamp]

I'm using Nero not Roxio so I have no idea why that's on my computer, I'll just upgrade to Nero 7 and see if that helps out the thing is I only get this problem when I run the ripped files through that Restream program.

[locoeng]

I'll just upgrade to Nero 7 and see if that helps out the thing is I only get this problem when I run the ripped files through that Restream program.

Don't waste your money, use Nero Clean tools from my earlier post and then install version 6.6.0.18 as suggested. You also need to use the Roxio Zap proggy that Chewy linked you to or you may continue to have problems. Even if you upgrade to Nero 7, the problem drivers will still be there whether you know they are there or not.

CdRomPeripheral : PIONEER DVD-ROM DVD-115 atapi Port 1 ID 0 DMA: Off

You also need to get this fixed. DMA should be enabled for all drives. To fix, uninstall driver via device manager and reboot...XP will reintall the correct drivers in DMA mode. I've read that one device in PIO mode may drag other devices down to their level....any truth Chewy?

[Chewy]

I just finished working on an old compaq, it had a clean install of W2k,
everything was slow as molasses, hard drive was in dma mode ,but 3 other drives were pio mode, zip drive ok, but both optical including a 48x cd burner.

I figure the zip pulled the burner into pio mode with it, but the cdrom shouldn't have gone to pio on it's own. Then I checked the jumpers, hd was CS and cd-rom was slave. Do it right, the standard way or forget it, figure it out?, I gave up a long time ago.

[gvamp]

Don't waste your money, use Nero Clean tools from my earlier post and then install version 6.6.0.18 as suggested. You also need to use the Roxio Zap proggy that Chewy linked you to or you may continue to have problems. Even if you upgrade to Nero 7, the problem drivers will still be there whether you know they are there or not.

I can't seem to find 6.6.0.18 Nero took it off there site so unless someone has it archived at a diffrent site then I don't know where to get it. Thanks for the tip about the DVD-ROM it's been giving me some problems as of late.

[photo_angel2004]

Here you go :

http://forum.digital-digest.com/showthread.php?t=62465

[gvamp]

Thanks for the link. After uninstalling the Pioneer Drive DMA is still off is this a problem?