Another Illegal Disc ERROR, any help would be great!

[dmoney]

I never use to have this problem before, and then i started getting an ILLEGAL DISC ERROR every time i burned a dvd. I bought a new burner and replaced my old one, and it was still suffering from the same problem. So i reformatted my computer and everything worked fine for awhile until now. Now i am getting the same problems i did before. ILLEGAL DISC ERROR

I kno u guys get tons of these problem threads, but any help or suggestions at all will be greatly appreciated. here is the error message...



Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.11
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0D - HA 1 TA 1 - 6.3.1.11
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JB-00GVA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y160L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHM-165H6S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S H: CDRom0
LITE-ON DVDRW SHM-165H6S I: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 511MB (523756kB)
Free physical memory: 227MB (233340kB)
Memory in use : 55 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.7.2006
NeroAPI
10:44:41 PM #1 Phase 112 File APIProgress.cpp, Line 269
DVD-Video files reallocation started

10:44:41 PM #2 Phase 114 File APIProgress.cpp, Line 269
DVD-Video files reallocation completed (no file modified)

10:44:41 PM #3 Phase 111 File APIProgress.cpp, Line 269
DVD-Video files sorted

10:44:42 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

10:44:42 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:44:42 PM #6 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SHM-165H6S running

10:44:42 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:44:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

10:44:42 PM #9 Text 0 File Burncd.cpp, Line 3196
Turn on Disc-At-Once, using DVD media

10:44:42 PM #10 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)

10:44:42 PM #11 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE

10:44:42 PM #12 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD-R
Disc Manufacturer: PRINCO -
Disc Application Code: 64, Disc Physical Code: 193

10:44:42 PM #13 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:44:42 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------

10:44:42 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41

10:44:42 PM #16 Phase 24 File APIProgress.cpp, Line 269
Caching of files started

10:44:42 PM #17 Text 0 File Burncd.cpp, Line 4206
Cache writing successful.

10:44:42 PM #18 Phase 25 File APIProgress.cpp, Line 269
Caching of files completed

10:44:42 PM #19 Phase 36 File APIProgress.cpp, Line 269
Burn process started at 4x (5,540 KB/s)

10:44:42 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2345
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:44:42 PM #21 Text 0 File DVDR.cpp, Line 1664
Recording mode: Sequential Recording Mode

10:44:42 PM #22 Text 0 File Mmc.cpp, Line 20125
Set BUFE: SMART-BURN -> ON , SMART-BURN : ON

10:44:42 PM #23 Text 0 File DVDR.cpp, Line 1805
Start write address at LBA 0
DVD high compatibility mode: Yes

10:44:42 PM #24 Text 0 File Cdrdrv.cpp, Line 8063
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:45:18 PM #25 Text 0 File Cdrdrv.cpp, Line 1293
22:45:18.265 - LITE-ON DVDRW SHM-165H6S\H1 T1 : Queue again later

10:49:06 PM #26 SCSI -1046 File Cdrdrv.cpp, Line 1441
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x035E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

10:49:06 PM #27 CDR -1046 File Writer.cpp, Line 304
Illegal disc

10:49:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

10:49:06 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

10:49:06 PM #30 Text 0 File DVDR.cpp, Line 2015
EndDAO: Last written address was 1279

10:49:06 PM #31 Phase 38 File APIProgress.cpp, Line 269
Burn process failed at 4x (5,540 KB/s)

10:49:07 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

10:49:07 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[photo_angel2004]

Hello,
Welcome to the forum.

You may want to try burning with IMGburn, its free.

Or upgrade your nero to

http://forum.digital-digest.com/showthread.php?t=62465

[dmoney]

thanks, yah i've tried upgrading to nero 6.6, but it didn't do any good, so i installed the older version since it seem to work fine before.

[photo_angel2004]

did you try uninstalling then reboot then reinstalling shrink?

[BR7]

what brand of disc are using?
This means your burner isn't recognizing the disc

Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)

This basically means your burner doesn't like the discs

Nero API version: 6.3.1.11
Using interface version: 6.3.1.4

Update to Nero version 6.6.0.18 here ooppss I see you already did
I am not sure what speed your burning at if your not already burning at 4x give it a try.I think your Nero is working OK

[Chewy]

http://www.videohelp.com/dvdmedia.php?dvdmediadvdridsearch=PRINCO......%20

This basically means your burner doesn't like the discs

not many burners do, they are crap

[photo_angel2004]

I thought the princo's were OK until I started testing the burned princo's that I have I am find this out. OMG I will never use those again.

I ordered 200 TY's I think I am going to be doing a lot of re burning.

[Chewy]

A few of my burns started not playing when I took them over to a friends house(iffy player), I then started scanning, found the bad brands pretty quick and reburned over 100 disks one month. Still replacing marginal burns.
The trouble is marginal burns may play this year fine but next year I might not be able to recover the data and instead of watching a backup I will be remaking it. Why bother backing up at all?

[BR7]

@dmoney
You may want to give this a look LINK

:

[dmoney]

wow i can't believe all the great support i'm getting, thnx alot all! i'mma go buy sum better blanks tomorrow and try it out. *crosses fingers*

[Chewy]

try to get some +R verbatims, officemax has them on sale this week, you can bitsett to dvd-rom if your players don't like +r format

your burner may have an issue with -R, liteon is in the process of fixing that

[floresdave]

<lite-on dvdrw="" shm-165h6s=""><atapi><not specified="">
[/quote]
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 2:16:24 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 1:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)[/quote]

Prassi/Veritas driver could be conflicting with nero. If i'm correct it's associated with sonic recordnow or roxio.
If you are going to burn with that media than you have to adjust the size of your output files in shrink to be smaller so they are not pushing the capacity of the disc. i would suggest 4300 right now you are at 4464mb and the capacity of disc is 4489mb that's cutting it close with the most compatiable media and/or burner.

btw: Since their is the only office max is on the other side of town where i live i usually just bring their ad into office depot or best buy and they match the advertised price. saves me some gas money.

</not></atapi></lite-on>http://tools.roxio.com/support/tools/roxizap.exe

<lite-on dvdrw="" shm-165h6s=""><atapi><not specified="">
</not></atapi></lite-on>

[BR7]

If that's the case I would recommend the Windows Installer CleanUp Utility 1.0 to remove Roxio\Sonic programs I did a lot of reading about the roxizap and it seems not to work so well most of the time while the Windows Installer CleanUp Utility 1.0 has worked 100% of the time

Its very simple to use just highlight roxio and sonic programs like I have here and then click remove and your done(my roxio is already removed so pay no attention to what I have highlighted this is just an example)

[Chewy]

I have been informed by what I consider a top expert in the field that the newer versions don't conflict?

created 5/19/2006