ok will do
DVD+R DL Failure at ~50% :(
Collapse
X
-
As well, they should burn very adequately at 2.4X and some of the newer ones at 4x.
RegardsLes
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
Comment
-
if it wouldn't boot after adding a drive then your power supply is too weak for safe dvd burning, your dvd burner is slaved to a hard drive, not good.
if dma shows off for a serial drive that's ok
you show 2 pata drives with dma off
which drive is the C drive?Comment
-
DiskPeripheral : HDS724040KLSA80 iaStor Port 1 ID 0 DMA: On
The DVD is the only drive on the chanel currently. There is a seperate IDE controller PCI card that is plugged into two of the hard drives. the rest are SATA.
I don't understand why I would need more power to burn a dual layer if I have been burning singles layer right along. I guess best way to correct this is disconnect everything but C and the DVD burner and give it a shot. - Without buying new media.
I'm doublecheckin the firmware version nowComment
-
Here is a sucessful single layer burn log from today:
User
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 5:51:12 PM
Nero version: 6.6.0.1
Recorder: <SONY DVD RW DW-Q120A> Version: PYS2 - HA 0 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 3 TA 0 - 6.6.0.1
Adapter driver: <d347prt> HA 3
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DW-Q120A atapi Port 0 ID 0 DMA: On
DiskPeripheral : HDS724040KLSA80 iaStor Port 1 ID 0 DMA: On
DiskPeripheral : HDS724040KLSA80 iaStor Port 1 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DW-Q120A E: CDRom0
Generic DVD-ROM G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095196kB)
Free physical memory: 1492MB (1527872kB)
Memory in use : 27 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.8.2006
ISO compilation
7:02:19 PM #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:02:20 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
7:02:20 PM #3 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-Q120A running
7:02:20 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:02:20 PM #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media
7:02:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2263167 (502:55.42, 4420MB)
7:02:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
7:02:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DW-Q120A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R04, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
7:02:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:02:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2263168 (2263168) = #2263168/502:55.43
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263168 blocks [SONY DVD RW DW-Q120A]
--------------------------------------------------------------
7:02:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [SONY DVD RW DW-Q120A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4634968064, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2263168 | lead-out | 1 | 0x00 | 0x41
7:02:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
7:02:20 PM #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
7:02:20 PM #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
7:02:20 PM #15 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 6x (8,310 KB/s)
7:02:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:02:20 PM #17 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: PRODISC.
Media type ID: R04
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 50 52 4F 44 49 - 53 43 00 52 30 34 04 38 ...PRODISC.R04.8
23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
7:02:20 PM #18 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 9:27,922 (567922ms) -> OK
7:02:20 PM #19 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes
7:12:21 PM #20 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DW-Q120A > start writing Lead-Out at LBA 2263168 (228880h), lenght 0 blocks
7:12:21 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:12:43 PM #22 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
7:12:43 PM #23 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
7:12:43 PM #24 Phase 37 File dlgbrnst.cpp, Line 1853
Burn process completed successfully at 6x (8,310 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/23/2001 11:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 4:12:48 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 4:59:44 PM (Adapter driver for rec)
File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)Comment
-
Waiting for Verbatims .....
RegardsLes
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
Comment
-
I guess I'm going to buy some Verbatims but I wanted to post this first.
I burned one DVD ripped with DVDDecrypter with ImgBurn and it failed finalizing and retried and it allegedly verified the disc but I can not read it.
I tried another image but it failed before it got to the layer break. All my hard drives are disconnected except for C (same configuration as the working single layer burn in nero from today).
Any other ideas other then media change?
I 19:24:32 ImgBurn Version 2.0.0.0 started!
I 19:24:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 19:24:32 Initialising SPTI...
I 19:24:32 Searching for SCSI / ATAPI devices...
I 19:24:32 Found 1 DVD±RW!
I 19:25:45 Searching for SCSI / ATAPI devices...
I 19:25:45 Found 1 DVD±RW!
I 19:26:15 Operation Started!
I 19:26:15 Source File: C:\Documents and Settings\User\Desktop\not backed up\video\dual layer dvd\SIMPSONS_S2_D4.ISO
I 19:26:15 Source File Sectors: 3,699,611 (MODE1/2048)
I 19:26:15 Source File Size: 7,576,803,328 bytes
I 19:26:15 Source File Volume Identifier: SIMPSONS_S2_D4
I 19:26:15 Source File Implementation Identifier: MEI
I 19:26:15 Source File File System(s): ISO9660, UDF (1.02)
I 19:26:15 Destination Device: [0:0:0] SONY DVD RW DW-Q120A PYS2 (E (ATA)
I 19:26:16 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)
I 19:26:16 Destination Media Sectors: 4,173,824
I 19:26:16 Write Mode: DVD
I 19:26:16 Write Type: DAO
I 19:26:16 Write Speed: 1x
I 19:26:16 Link Size: Auto
I 19:26:16 Test Mode: No
I 19:26:16 BURN-Proof: Enabled
E 19:26:34 Operation Failed! - Duration: 00:00:18
I 19:26:34 Average Write Rate: N/A - Maximum Write Rate: N/A
I 19:26:38 Operation Started!
I 19:26:38 Source File: C:\Documents and Settings\User\Desktop\not backed up\video\dual layer dvd\SIMPSONS_S2_D4.ISO
I 19:26:38 Source File Sectors: 3,699,611 (MODE1/2048)
I 19:26:38 Source File Size: 7,576,803,328 bytes
I 19:26:38 Source File Volume Identifier: SIMPSONS_S2_D4
I 19:26:38 Source File Implementation Identifier: MEI
I 19:26:38 Source File File System(s): ISO9660, UDF (1.02)
I 19:26:38 Destination Device: [0:0:0] SONY DVD RW DW-Q120A PYS2 (E (ATA)
I 19:26:38 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)
I 19:26:38 Destination Media Sectors: 4,173,824
I 19:26:38 Write Mode: DVD
I 19:26:38 Write Type: DAO
I 19:26:38 Write Speed: 1x
I 19:26:38 Link Size: Auto
I 19:26:38 Test Mode: No
I 19:26:38 BURN-Proof: Enabled
I 19:26:45 Optimal L1 Data Zone Start LBA: 2042704 (VTS_04, PGC: 4, Cell: 1, Vob/Cell ID: 25/1, Time: 00:00:00, SPLIP: No)
I 19:26:45 Optimal L0 Data Zone Capacity: 2,042,704
I 19:26:45 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set
I 19:27:29 Filling Buffer...
I 19:27:31 Writing LeadIn...
I 19:27:33 Writing Image...
I 19:27:33 Writing Layer 0... (LBA: 0 - 2042703)
I 19:48:27 Writing Layer 1... (LBA: 2042704 - 3699610)
I 20:05:23 Synchronising Cache...
I 20:05:27 Closing Track...
I 20:05:28 Finalising Disc...
W 20:08:13 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Session Fixation Error Writing Lead Out
I 20:15:12 Image MD5: a86f37568296c77e4ee6e358edb2e84f
I 20:15:12 Operation Successfully Completed! - Duration: 00:48:34
I 20:15:12 Average Write Rate: 3,261 KB/s (2.4x) - Maximum Write Rate: 3,490 KB/s (2.5x)
I 20:15:12 Cycling Tray before Verify...
W 20:15:19 Waiting for device to become ready...
I 20:16:03 Device Ready!
I 20:16:12 Operation Started!
I 20:16:12 Source Device: [0:0:0] SONY DVD RW DW-Q120A PYS2 (E (ATA)
I 20:16:12 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)
I 20:16:12 Image File: C:\Documents and Settings\User\Desktop\not backed up\video\dual layer dvd\SIMPSONS_S2_D4.ISO
I 20:16:12 Image File Sectors: 3,699,611 (MODE1/2048)
I 20:16:12 Image File Size: 7,576,803,328 bytes
I 20:16:12 Image File Volume Identifier: SIMPSONS_S2_D4
I 20:16:12 Image File Implementation Identifier: MEI
I 20:16:12 Image File File System(s): ISO9660, UDF (1.02)
I 20:16:12 Verifying Sectors...
I 20:31:37 Device MD5: a86f37568296c77e4ee6e358edb2e84f
I 20:31:38 Image MD5: a86f37568296c77e4ee6e358edb2e84f
I 20:31:41 Operation Successfully Completed! - Duration: 00:15:26
I 20:31:41 Average Verify Rate: 7,999 KB/s (5.8x) - Maximum Verify Rate: 14,546 KB/s (10.5x)
I 20:48:54 Operation Started!
I 20:48:54 Source File: C:\Documents and Settings\User\Desktop\not backed up\video\dual layer dvd\SIMPSONS - Season 1 Disc 1.iso
I 20:48:54 Source File Sectors: 3,752,499 (MODE1/2048)
I 20:48:54 Source File Size: 7,685,117,952 bytes
I 20:48:54 Source File Volume Identifier: SIMPSONS_D1
I 20:48:54 Source File Implementation Identifier: MEI
I 20:48:54 Source File File System(s): ISO9660, UDF (1.02)
I 20:48:54 Destination Device: [0:0:0] SONY DVD RW DW-Q120A PYS2 (E (ATA)
I 20:48:54 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D00-01) (Speeds: 2.4x)
I 20:48:54 Destination Media Sectors: 4,173,824
I 20:48:54 Write Mode: DVD
I 20:48:54 Write Type: DAO
I 20:48:54 Write Speed: 2.4x
I 20:48:54 Link Size: Auto
I 20:48:54 Test Mode: No
I 20:48:54 BURN-Proof: Enabled
I 20:48:57 Optimal L1 Data Zone Start LBA: 1876304 (VTS_04, PGC: 4, Cell: 1, Vob/Cell ID: 22/1, Time: 00:00:00, SPLIP: No)
I 20:48:57 Optimal L0 Data Zone Capacity: 1,876,304
I 20:48:57 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set
I 20:49:42 Filling Buffer...
I 20:49:43 Writing LeadIn...
I 20:49:45 Writing Image...
I 20:49:45 Writing Layer 0... (LBA: 0 - 1876303)
W 21:04:58 Failed to Write Sectors 1479136 - 1479167 - Write Error
W 21:04:58 Retrying (1 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (2 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (3 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (4 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (5 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (6 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (7 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (8 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (9 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (10 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (11 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (12 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (13 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (14 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (15 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (16 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (17 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (18 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:58 Retrying (19 of 20)...
W 21:04:58 Retry Failed - Invalid Address For Write
W 21:04:59 Retrying (20 of 20)...
W 21:04:59 Retry Failed - Invalid Address For Write
W 21:08:33 Retrying (21)...
W 21:08:33 Retry Failed - Invalid Address For Write
W 21:08:34 Retrying (22)...
W 21:08:34 Retry Failed - Invalid Address For Write
W 21:08:35 Retrying (23)...
W 21:08:35 Retry Failed - Invalid Address For Write
W 21:08:35 Retrying (24)...
W 21:08:35 Retry Failed - Invalid Address For Write
W 21:08:35 Retrying (25)...
W 21:08:35 Retry Failed - Invalid Address For Write
W 21:08:36 Retrying (26)...
W 21:08:36 Retry Failed - Invalid Address For Write
W 21:08:36 Retrying (27)...
W 21:08:36 Retry Failed - Invalid Address For Write
W 21:08:37 Retrying (28)...
W 21:08:37 Retry Failed - Invalid Address For Write
W 21:08:37 Retrying (29)...
W 21:08:37 Retry Failed - Invalid Address For Write
W 21:08:37 Retrying (30)...
W 21:08:37 Retry Failed - Invalid Address For Write
W 21:08:37 Retrying (31)...
W 21:08:37 Retry Failed - Invalid Address For Write
W 21:08:37 Retrying (32)...
W 21:08:37 Retry Failed - Invalid Address For Write
W 21:08:38 Retrying (33)...
W 21:08:38 Retry Failed - Invalid Address For Write
W 21:08:38 Retrying (34)...
W 21:08:38 Retry Failed - Invalid Address For Write
W 21:08:38 Retrying (35)...
W 21:08:38 Retry Failed - Invalid Address For Write
W 21:08:38 Retrying (36)...
W 21:08:38 Retry Failed - Invalid Address For Write
W 21:08:39 Retrying (37)...
W 21:08:39 Retry Failed - Invalid Address For Write
W 21:08:39 Retrying (38)...
W 21:08:39 Retry Failed - Invalid Address For Write
W 21:08:40 Retrying (39)...
W 21:08:40 Retry Failed - Invalid Address For Write
W 21:08:40 Retrying (40)...
W 21:08:40 Retry Failed - Invalid Address For Write
W 21:08:40 Retrying (41)...
W 21:08:40 Retry Failed - Invalid Address For Write
W 21:08:41 Retrying (42)...
W 21:08:41 Retry Failed - Invalid Address For Write
W 21:08:41 Retrying (43)...
W 21:08:41 Retry Failed - Invalid Address For Write
W 21:08:41 Retrying (44)...
W 21:08:41 Retry Failed - Invalid Address For Write
W 21:08:41 Retrying (45)...
W 21:08:41 Retry Failed - Invalid Address For Write
E 21:08:42 Failed to Write Sectors 1479136 - 1479167 - Write Error
I 21:08:42 Synchronising Cache...
I 21:08:43 Closing Track...
I 21:08:44 Finalising Disc...
E 21:08:45 Failed to Write Image!
E 21:08:47 Operation Failed! - Duration: 00:19:50
I 21:08:47 Average Write Rate: 2,604 KB/s (1.9x) - Maximum Write Rate: 3,387 KB/s (2.4x)Comment
-
Verbatims Rock - TY Blutach!
I tried everything - reloaded my PC - replaced all my RAM - all my Hard drives and controllers and after a few more bad imation burns tried a Verbatim. Burnt 10 in a row perfectly. I'm returning those garbage disks and getting Verbatim's in return.
Thanks for everyone's help! - ChrisComment
-
Verbatims Rock - TY Blutach!
I tried everything - reloaded my PC - replaced all my RAM - all my Hard drives and controllers and after a few more bad imation burns tried a Verbatim. Burnt 10 in a row perfectly. I'm returning those garbage disks and getting Verbatim's in return.
Thanks for everyone's help! - ChrisComment
Comment