Burnt out burning

[Jimsabeach]

Since downloading ri4m version 1.4.10.0, I have been unable to have a complete burn process. Numerous errors come up in dvdshrink which stop the process but the one I get mostly is while the burning process is attempted using Nero API version: 6.3.1.17. I have tried using various format discs - +RW, -R (4x), -R (16x) but it doesnt seem to matter which type disc I use I almost always pretty much get the same log results which are set forth below. I am using a I/O Magic 16x external dual-layer +/- R/RW burner model no. IOM-601. I had no problems until I downloaded ri4me version 1.4.10.0. Is it me, is it undetected disc copy protections, or is it RI4me?


P.S.: !!! Congratulations furiousg!!! boy or girl?

__________________________________

Nero Serial Removed

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/4/2005 9:06:10 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero API version: 6.3.1.17
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <DVDRW IDE 16X> Version: A07F - HA 2 TA 0 - 6.3.1.17
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FA-60 <wbr> atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040 D: CDRom0
DVDRW IDE 16X E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523248kB)
Free physical memory: 121MB (124360kB)
Memory in use : 76 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.8.2006
NeroAPI
12:13:52 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started

12:13:52 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)

12:13:52 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted

12:13:52 PM #4 Text 0 File Reader.cpp, Line 118
Reader running

12:13:52 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:13:52 PM #6 Text 0 File Writer.cpp, Line 124
Writer DVDRW IDE 16X running

12:13:53 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:13:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

12:13:53 PM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-At-Once, using DVD media

12:13:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 245
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2221903 (493:45.28, 4339MB)

12:13:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 257
Write in overburning mode: NO

12:13:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137
Recorder: DVDRW IDE 16X, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

12:13:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 418
>>> Protocol of DlgWaitCD activities: <<<
=============================<wbr>============

12:13:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2221904 (2221904) = #2221904/493:45.29
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2221904 blocks [DVDRW IDE 16X ]
-----------------------------<wbr>------------------------------<wbr>---

12:13:53 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [DVDRW IDE 16X ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4550459392, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|<wbr>_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2221904 | lead-out | 1 | 0x00 | 0x41

12:13:53 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started

12:13:53 PM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

12:13:53 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed

12:13:53 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)

12:13:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:13:54 PM #21 Text 0 File DVDR.cpp, Line 1876
Recording mode: Sequential Recording Mode

12:13:54 PM #22 Text 0 File Mmc.cpp, Line 20394
Set BUFE: Super Link -> ON

12:13:54 PM #23 Text 0 File DVDR.cpp, Line 2017
Start write address at LBA 0
DVD high compatibility mode: Yes

12:13:54 PM #24 Text 0 File Cdrdrv.cpp, Line 8120
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

12:14:06 PM #25 Text 0 File Cdrdrv.cpp, Line 1294
12:14:06.468 - DVDRW IDE 16X\H2 T0 : Queue again later

12:20:17 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x00CA0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE<wbr>_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x0F 0x1A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

12:20:17 PM #27 CDR -500 File Writer.cpp, Line 304
SCSI command aborted
DVDRW IDE 16X\H2 T0

12:20:17 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

12:20:17 PM #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

12:20:17 PM #30 Text 0 File DVDR.cpp, Line 2253
EndDAO: Last written address was 989887

12:20:17 PM #31 CDR -1114 File WriterStatus.cpp, Line 164
Reset occurred

12:20:17 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

12:20:17 PM #33 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)

12:20:17 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.

12:20:17 PM #35 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/4/2005 9:06:10 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 10/26/2005 1:12:48 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 0, size=92672 bytes, created 7/7/2004 1:47:20 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 0, size=28672 bytes, created 7/7/2004 1:48:00 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 0, size=7680 bytes, created 7/7/2004 1:50:18 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon<wbr>\AllocateCDROMs : 0 (Security Option)

[Dialysis1]

Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
I don't know much about Nero but this doesn't look right.

http://forum.digital-digest.com/showthread.php?postid=289814#post289814

This is a Nero problem, not DVD Shrink.

[Jack Lurker]

CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off

If thats the drive you are burning with then you need to enable DMA, check the link in my sig.

File 'Drivers\InCDfs.SYS': Ver=4, 2, 15, 0, size=92672 bytes, created 7/7/2004 1:47:20 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 15, 0, size=28672 bytes, created 7/7/2004 1:48:00 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 15, 0, size=7680 bytes, created 7/7/2004 1:50:18 PM (InCD4 driver for win NT/2K/XP)

Get rid of InCd by using this Nero Clean Tool.http://ww2.nero.com/nero6/eng/Clean_Tools.html as it can cause problems.

[Gary D]

Disc Manufacturer: CMC MA - G. AM3

Get better media. This is poo-poo! Use Verbs or TY. See the quality list in my signature.

=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23FA-60 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040 D: CDRom0
DVDRW IDE 16X E: CDRom1
=======================

This does not seem right as no DMA is listed for your burner. Is your burner USB/firewire connected???? Or is the DMA off???

[Chewy]

dialysis use the report button

thread moved to blank media and burning

[daman]

Memory in use : 76 %

May want to free some up,,getting tight

[healimonster]

If thats the drive you are burning with then you need to enable DMA, check the link in my sig.

I don't see the link anymore... could you post it please because I have the very same drive and problem.

[Chewy]

I don't see the link anymore... could you post it please because I have the very same drive and problem.

would you post a burn log, see the sticky at the top of the forum

http://forum.digital-digest.com/showthread.php?t=67507