Nero won't burn at 6x

[Fox3inbound]

I ran both of the programs, ASPI and Roxio.. I don't have Roxio installed on this computer and I don't know what ASPI is... How do I use the Devfilter program?

[Fox3inbound]

Oh... I'm assuming you want me to post this...

----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Class Filter: PartMgr
Device Object: WDC WD20 00JS-98MHB0 SCSI Disk Device
Lower Filter Drivers: No Lower Filter Drivers specified for this device

Driver Name: partmgr.sys
File Location: c:\windows\system32\drivers
File Description: Partition Manager
File Version: 5.1.2600.0 (XPClient.010817-1148) [5.1.2600.0]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.0 [5.1.2600.0]
Company Name: Microsoft Corporation

[Fox3inbound]

Disc Drive...

----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Device Filter: redbook
Device Object: LITE-ON DVDRW SOHW-1693S
Lower Device Filter: imapi

Driver Name: redbook.sys
File Location: c:\windows\system32\drivers
File Description: Redbook Audio Filter Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation

Driver Name: imapi.sys
File Location: c:\windows\system32\drivers
File Description: IMAPI Kernel Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation

[Chewy]

just open the program and hit clipboard after selecting your burner
then paste into a reply

[Chewy]

since you already have the best firmware(codeguys) let's reflash with it in safe mode no disk in drive

and try a burn with new nero and post a new log showing results

did shut some stuff down?

[Fox3inbound]

I'm not sure what you mean, Chewy... (I know how to start in Safemode)

[Chewy]

http://codeguys.rpc1.org/firmwares.html#SOHW-1693S

redownload and extract KC4B

boot into safe mode and reflash the drive with that firmware, make sure the drive is empty

[Fox3inbound]

OK thanks... I'll try it...

[Fox3inbound]

No luck at 6x again...


Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KC4B - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KC4B - HA 1 TA 1 - 6.6.0.16
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 1 DMA: On
DiskPeripheral : WDC WD2000JS-98MHB0 02.0 m5288 Port 2 ID 6 DMA: Off

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095536kB)
Free physical memory: 1419MB (1454040kB)
Memory in use : 30
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.12.2006
UDF/ISO compilation
3:19:23 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

3:19:23 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

3:19:23 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:19:23 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

3:19:23 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

3:19:23 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running

3:19:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

3:19:23 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

3:19:23 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

3:19:23 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1874687 (416:35.62, 3661MB)

3:19:23 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD DVD)

3:19:23 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

3:19:23 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:19:23 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1874688 (1874688) = #1874688/416:35.63
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1874688 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------

3:19:23 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3839361024, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1874688 | lead-out | 1 | 0x41 | 0x00

3:19:23 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

3:19:23 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

3:19:23 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

3:19:23 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 6x (8,310 KB/s)

3:19:23 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:19:23 PM #21 Text 0 File DVDR.cpp, Line 2379
Recording mode: Sequential Recording Mode for Multisession

3:19:23 PM #22 Text 0 File Mmc.cpp, Line 21708
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

3:19:23 PM #23 Text 0 File DVDR.cpp, Line 2534
Start write address at LBA 0
DVD high compatibility mode: No

3:19:23 PM #24 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:20:37 PM #25 SCSI -1106 File Cdrdrv.cpp, Line 1434
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C170000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03

3:20:37 PM #26 CDR -1106 File Writer.cpp, Line 311
Power calibration error

3:20:37 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:20:37 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:20:38 PM #29 Text 0 File DVDR.cpp, Line 2774
EndDAO: Last written address was -1

3:20:38 PM #30 Phase 133 File dlgbrnst.cpp, Line 1832
Writing short lead-out

3:20:38 PM #31 SCSI -1176 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x04
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x03 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x04

3:20:38 PM #32 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error

3:20:38 PM #33 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once

3:20:38 PM #34 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 6x (8,310 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 2/17/2006 5:26:41 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Fox3inbound]

This is the one you asked me to d/l...


----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Device Filter: redbook
Device Object: SONY DVD RW DRU-800A
Lower Device Filter: imapi

Driver Name: redbook.sys
File Location: c:\windows\system32\drivers
File Description: Redbook Audio Filter Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation

Driver Name: imapi.sys
File Location: c:\windows\system32\drivers
File Description: IMAPI Kernel Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation



----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Class Filter: PartMgr
Device Object: WDC WD20 00JS-98MHB0 SCSI Disk Device
Lower Filter Drivers: No Lower Filter Drivers specified for this device

Driver Name: partmgr.sys
File Location: c:\windows\system32\drivers
File Description: Partition Manager
File Version: 5.1.2600.0 (XPClient.010817-1148) [5.1.2600.0]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.0 [5.1.2600.0]
Company Name: Microsoft Corporation

[Chewy]

well aspi didn't get killed

still got 600 megs of memory in use(way too high) and

no signs of a new nero

[Fox3inbound]

should I run the ASPI killer again?

I made sure to install the new nero before I started back up in safe-mode

I think the memory might be high because of all of the Nero add ons that I installed.. InCD, Photoshow, etc..

[Fox3inbound]

This is what the ASPI log shows

[Chewy]

that must have been an old log then

latest is the one at the bottom

[Fox3inbound]

how do I reduce the 600megs of memory?