Harry Potter - Goblet of fire

**Dialysis1** · 16 Jan 2007, 08:21 AM

No.
This is a burning problem.

**Chokito** · 16 Jan 2007, 08:28 AM

I have two burners and neither of them has done this before. I even upgraded firmware after the first bad burn. Could it be the burning software (i.e. nero)? Should I try with Imgburn? Or maybe it's the compression rate. Around 57% with only movie and menus.

**Dialysis1** · 16 Jan 2007, 08:39 AM

Posting your burn log will help. This thread will probably be moved to the Blank Media and Burning forum when a mod comes along.

**Chokito** · 16 Jan 2007, 08:26 PM

I'm almost sure I didn't save the nero log as I had no problems during the rip and burn. I guess I'll have to waste another blank.
I read some of the threads about the use of nero cd dvd speed to check the quality of disks, but if I understood correctly, that will only measure the quality of the burn. Is there a way to check the quality of the media before the burn? I mean apart from looking up the mediacode on http://www.digitalfaq.com/media/dvdmedia.htm.

**Chewy** · 16 Jan 2007, 08:36 PM

there's a lot of fake TaiyoYuden, instead of wasting more blanks, just post the appropriate nero burn log(see sticky at top of this forum)

we need to know both burners and their firmware

how are the TY disks are branded? packaged etc? labeled? made where?

**Chokito** · 16 Jan 2007, 09:36 PM

I was rather hoping you wouldn't mention the possibility of fake disks. (hoping it was rare to say the least).
I'm afraid I didn't save the nero log so I guess I have no alternative to burning another blank, do I?
The disks are DVD-R 4.7GB, branded Circle, shrink-wrapped, no label and no indication as to where they were made. Bought them on-line and the seller indicates Taiyo Yuden as Manufacturer (for what it's worth)
Burners are a (relatively) new LITE-ON SHM 165P6S and an old BTC DRW 1004IM, but I dont remember the firmware. Have to get home to give you that info. Unless I messed up though I have just upgraded the LITE-ON firmware. The LITE-ON is the burner I used.
At 4x before anyone asks.

**Chewy** · 16 Jan 2007, 11:03 PM

the e-circle ty fakes were sold in europe several months ago, suppliers later dropped them

you might get some of them to work, very iffy

scanning with cdspeed will help

My clone/fakes gave a few good burns, I started checking every burn and pitched a lot of them, big waste of time

a picture of a real TaiyoYuden showing typical serial numbers

Attached Files

serial.PNG (217.3 KB, 262 views)

**soup** · 17 Jan 2007, 12:53 AM

Nero normally saves the log. Program Files / Ahead / Nero / History.log.

**Chokito** · 17 Jan 2007, 01:36 AM

Originally Posted by Chewy

My clone/fakes gave a few good burns, I started checking every burn and pitched a lot of them, big waste of time

@Chewy.
You ended up with some fake TYs? I can definitely understand the big waste of time. I started a scan this morning but the speed went down to 0x afetr a while. Will post scan results as soon as I can get one done.
I'll also check the serial from the dvds I got.

@ soup.
Thank you. My mistake really, cause I later (after posting) found that in one of the stickies. I'm sorry I made you repeat it.

**Chewy** · 17 Jan 2007, 01:45 AM

Disk Quality Scan Thread - Digital Video Forums

http://forum.digital-digest.com/showthread.php?postid=410052#post410052

Talk about blank DVD media, burning and hardware related problems

I bought 200 of these upon advise here in the forum, I then educated myself
about fake ty's, only one of my burners, the lg will burn them ok/so so.

**Chokito** · 17 Jan 2007, 01:55 AM

Well Chewy let me tell you that in the partial scan I did this morning I was getting P I errors at an average of 1100 and a max of 1630 (those are NOT typing errors) and P I failures at average 140 and max I can't remember.
The funny thing is I used a few for burning .avi files I converted to DVD (with TMPGEnc) and even though most dvds were for the kids, and I hardly check them, it didn't seem so bad.

**Chokito** · 17 Jan 2007, 03:30 AM

Ok.
Here is the info I owe you:

1)Nero log (thank you suop)

====== *** Nero-Burning Rom, History File *** ======
Nero Serial Removed*
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.17
Using interface version: 6.3.1.4
Installed in: C:\Programmi\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 17c
Recorder: <LITE-ON DVDRW SHM-165P6S>Version: MS0R - HA 2 TA 0 - 6.6.0.17
Adapter driver: <atapi> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 2 ID 1 DMA: On
DiskPeripheral : Maxtor 6L160P0 atapi Port 3 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0822N atapi Port 3 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SHM-165P6S D: CDRom5
DVDRW IDE1004 E: CDRom1
Generic DVD-ROM H: CDRom2
SCSIVAX DVD/CD-ROM G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1471MB (1506604kB)
Free physical memory: 820MB (840176kB)
Memory in use : 44
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.1.2007
NeroAPI
20.34.15 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

20.34.15 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

20.34.15 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

20.34.15 #4 Text 0 File Reader.cpp, Line 127
Reader running

20.34.15 #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHM-165P6S running

20.34.15 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

20.34.15 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20.34.15 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20.34.15 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

20.34.16 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20.34.16 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

20.34.16 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

20.34.16 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20.34.16 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SHM-165P6S]
--------------------------------------------------------------

20.34.16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHM-165P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20.34.16 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

20.34.16 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

20.34.16 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

20.34.16 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5.540 KB/s)

20.34.16 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20.34.16 #21 Text 0 File DVDR.cpp, Line 2505
Recording mode: Sequential Recording Mode

20.34.16 #22 Text 0 File Mmc.cpp, Line 21732
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

20.34.16 #23 Text 0 File DVDR.cpp, Line 2660
Start write address at LBA 0
DVD high compatibility mode: Yes

20.34.16 #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20.35.04 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:35:04.187 - LITE-ON DVDRW SHM-165P6S\H2 T0 : Queue again later

20.49.29 #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SHM-165P6S> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

20.49.29 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20.49.29 #28 Text 0 File DVDR.cpp, Line 2903
EndDAO: Last written address was 2286111

20.49.53 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5.540 KB/s)

20.49.54 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

20.49.54 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22.16.24
File 'Drivers\PXHELP20.SYS': Ver=3.00.42a, size=36592 bytes, created 15/11/2006 22.01.32 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

2) Disc quality results:

General Information
Drive: LITE-ON DVDRW SHM-165P6S
Firmware: MS0R
Disco: DVD-R (TYG02)
Selected speed: 8 X
PI errors
Massima: 1633
Media: 1326.45
Total: 21824872
PI failures
Massima: 269
Media: 197.60
Total: 19578874
PO failures: n/a
Jitter: n/a
Scanning Statistics
Elapsed time: 9:58
Number of samples: 105374
Average scanning interval: 1.36 ECC
Glitches removed: 0

3) firmware is included in the above

4) I checked the serial on the discs and it says 0312
it also says (but you have to look real hard) -R8X EG-25-11

**Chokito** · 17 Jan 2007, 03:31 AM

Ok.
Here is the info I owe you:

1)Nero log (thank you suop)

====== *** Nero-Burning Rom, History File *** ======
Nero Serial Removed*
Nero Serial Removed*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programmi\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 17.35.32
Nero API version: 6.6.0.17
Using interface version: 6.3.1.4
Installed in: C:\Programmi\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 17c
Recorder: <LITE-ON SHM-165P6S DVDRW>Version: MS0R - HA 2 TA 0 - 6.6.0.17
Adapter driver: <ATAPI>HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : LITE-ON DVDRW SHM-165P6S atapi Port 2 ID 0 DMA: On
CdRomPeripheral : DVDRW IDE1004 atapi Port 2 ID 1 DMA: On
DiskPeripheral : Maxtor 6L160P0 atapi Port 3 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP0822N atapi Port 3 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SHM-165P6S D: CDRom5
DVDRW IDE1004 E: CDRom1
Generic DVD-ROM H: CDRom2
SCSIVAX DVD/CD-ROM G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1471MB (1506604kB)
Free physical memory: 820MB (840176kB)
Memory in use : 44
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.1.2007
NeroAPI
20.34.15 #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

20.34.15 #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

20.34.15 #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

20.34.15 #4 Text 0 File Reader.cpp, Line 127
Reader running

20.34.15 #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHM-165P6S running

20.34.15 #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

20.34.15 #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20.34.15 #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

20.34.15 #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

20.34.16 #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

20.34.16 #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

20.34.16 #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHM-165P6S, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193

20.34.16 #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

20.34.16 #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [LITE-ON DVDRW SHM-165P6S]
--------------------------------------------------------------

20.34.16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHM-165P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

20.34.16 #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

20.34.16 #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

20.34.16 #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

20.34.16 #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5.540 KB/s)

20.34.16 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

20.34.16 #21 Text 0 File DVDR.cpp, Line 2505
Recording mode: Sequential Recording Mode

20.34.16 #22 Text 0 File Mmc.cpp, Line 21732
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

20.34.16 #23 Text 0 File DVDR.cpp, Line 2660
Start write address at LBA 0
DVD high compatibility mode: Yes

20.34.16 #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

20.35.04 #25 Text 0 File Cdrdrv.cpp, Line 1288
20:35:04.187 - LITE-ON DVDRW SHM-165P6S\H2 T0 : Queue again later

20.49.29 #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON SHM-165P6S DVDRW>start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks

20.49.29 #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

20.49.29 #28 Text 0 File DVDR.cpp, Line 2903
EndDAO: Last written address was 2286111

20.49.53 #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5.540 KB/s)

20.49.54 #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

20.49.54 #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 19/05/2006 22.16.24
File 'Drivers\PXHELP20.SYS': Ver=3.00.42a, size=36592 bytes, created 15/11/2006 22.01.32 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

2) Disc quality results:

General Information
Drive: LITE-ON DVDRW SHM-165P6S
Firmware: MS0R
Disco: DVD-R (TYG02)
Selected speed: 8 X
PI errors
Massima: 1633
Media: 1326.45
Total: 21824872
PI failures
Massima: 269
Media: 197.60
Total: 19578874
PO failures: n/a
Jitter: n/a
Scanning Statistics
Elapsed time: 9:58
Number of samples: 105374
Average scanning interval: 1.36 ECC
Glitches removed: 0

3) firmware is included in the above

4) I checked the serial on the discs and it says 0312
it also says (but you have to look real hard) -R8X EG-25-11

**Chewy** · 17 Jan 2007, 04:12 AM

http://club.cdfreaks.com/showpost.php?p=1625455&postcount=625

theysa faka

Harry Potter - Goblet of fire

Harry Potter - Goblet of fire

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment