Burn process fails everytime at 4x

[Chewy]

got all the way to writting the lead out after 13 minutes, almost made it?

then

PMA update failure

points to a controller driver problem(that emulation software?)

another damn variable?

[zaid786]

I'm confused what you mean about this emulation software. What is it? Is it to do with the sata hard drives? Because at the moment all ive got attached to my pc is the ide hard drive and the dvd writer. Also I just burned a different brand of media (a dvd+rw) and it burned sucessfully. This is the log:

Zaid
n/a

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.1.1.0
Internal Version: 8, 1, 1, 0
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 8.1.1.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 5 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B F: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096620kB)
Free physical memory: 1555MB (1593156kB)
Memory in use : 24 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.1.2008
UDF compilation
14:46:30 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14:46:30 #2 Text 0 File Isodoc.cpp, Line 6671
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

14:46:30 #3 Text 0 File Burncd.cpp, Line 3530
Turn on Disc-At-Once, using DVD media

14:46:30 #4 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorDVD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

14:46:31 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2097599 (466:07.74, 4096MB)

14:46:31 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

14:46:31 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+RW
Disc Manufacturer ID: <RICOHJPN>, Media Type ID: <W11>, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1

14:46:31 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:46:31 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2097600 (2097600) = #2097600/466:8.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2097600 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------

14:46:31 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986
Prepare [F: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4295884800, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2097600 | 0 | 0x00
2097600 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14:46:51 #11 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.


14:46:51 #12 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Access is denied.


14:47:01 #13 Text 0 File SCSIPTICommands.cpp, Line 264
Error on LockVolume: Access is denied.


14:47:01 #14 Text 0 File Burncd.cpp, Line 4316
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

14:47:01 #15 Phase 24 File dlgbrnst.cpp, Line 1764
Caching of files started

14:47:01 #16 Text 0 File Burncd.cpp, Line 4435
Cache writing successful.

14:47:01 #17 Phase 25 File dlgbrnst.cpp, Line 1764
Caching of files completed

14:47:01 #18 Phase 36 File dlgbrnst.cpp, Line 1764
Burn process started at 4x (5,540 KB/s)

14:47:01 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2735
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

14:47:01 #20 Text 0 File Cdrdrv.cpp, Line 10026
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: RICOHJPN
Media type ID: W11
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..783]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
01 00 17 38 00 27 90 4C - 02 1E 00 2B 8E 3C 02 28 ...8.'.L...+.<.(
00 29 8E 52 02 1E 64 35 - 20 F0 20 E0 40 E0 00 00 .).R..d5....@...
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

14:47:01 #21 Text 0 File DVDR.cpp, Line 6525
Drive: HL-DT-ST DVDRAM GSA-4167B
Book Type request [LG]: DVD-ROM
Book Type setting not supported for the loaded disc type

14:47:01 #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes

14:47:01 #23 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

15:00:02 #24 Text 0 File WriterStatus.cpp, Line 113
<F: HL-DT-ST DVDRAM GSA-4167B> start writing Lead-Out at LBA 2097600 (2001C0h), length 0 blocks

15:00:04 #25 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 2097600

15:00:04 #26 Phase 37 File dlgbrnst.cpp, Line 1764
Burn process completed successfully at 4x (5,540 KB/s)

15:00:04 #27 Phase 78 File dlgbrnst.cpp, Line 1764
Data verification started

15:00:07 #28 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 590400

15:09:19 #29 Phase 80 File dlgbrnst.cpp, Line 1764
Data verification completed successfully

15:09:19 #30 Text 0 File SCSIPTICommands.cpp, Line 314
SPTI - Error 5 on DismountVolue: Access is denied.


15:09:19 #31 Text 0 File Cdrdrv.cpp, Line 11276
DriveLocker: UnLockVolume completed

15:09:19 #32 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Chewy]

here's an example of what a standard driver package gives without some sort of emulation driver

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1650 atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD360GD-00FNA0 35.0 UlSata Port 2 ID 0 DMA: Off
DiskPeripheral : ST3250823AS 3.02 UlSata Port 2 ID 2 DMA: Off

the ide motherboard shows as port 0(ide 1) and port 1 (ide 2)
the sata hard drives show dma off and ulsata


it's beginning to look like the other disks are bad?

SPTI - Error 5 on DismountVolue: Access is denied.

something is running in the background

download imgburn and try a burn with it, I don;t trust nero 8, especially if you were running an earlier version and got a bad install of nero 8

[zaid786]

Can I only burn images with imgburn? Is there a way of burning data dvds with it? If there was I would never go back to nero again. I always use imgburn to burn images and I have tried it with these cmc discs and it has failed several times. I'll try again and save the log this time. In reference to nero, I'm not using the normal full package of nero. I'm using "nero micro" which has everything stripped from it apart from nero express and nero burning rom. Its a extremely lite version of it and runs really fast. Is there a way I can get rid of this emulation driver somehow?

[Chewy]

Imgburn will do just about any kind of dvd, data or video. The build mode takes video compilations and makes an iso on the fly if you choose your recorder as destination not hard drive. Same scenario for a data dvd.
Post a filter driver load order just in case that nero didn't pick up some crap running on the system bus.

[zaid786]

----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Device Filter: redbook
Device Object: HL-DT-ST DVDRAM GSA-4167B
Lower Device Filter: imapi

Driver Name: redbook.sys
File Location: c:\windows\system32\drivers
File Description: Redbook Audio Filter Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation

Driver Name: imapi.sys
File Location: c:\windows\system32\drivers
File Description: IMAPI Kernel Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation

[zaid786]

----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Class Filter: PartMgr
Device Object: Maxtor 6Y080P0
Lower Filter Drivers: No Lower Filter Drivers specified for this device

Driver Name: partmgr.sys
File Location: c:\windows\system32\drivers
File Description: Partition Manager
File Version: 5.1.2600.0 (XPClient.010817-1148) [5.1.2600.0]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.0 [5.1.2600.0]
Company Name: Microsoft Corporation

[Chewy]

well nothing to fix there, clean as a whistle

I am thinking your burner is fine, those disks were bad and your power supply was weak

what drivers for the ide are you using(controller chipset)?

[zaid786]

erm atapi.sys and storprop.ddl? Whats the controller chipset? Yeah I think it might be the cheap ass cmc dvds. However my friend who has a NEC dvd writer and he hasn't had one coaster and he bought just as many as me lol. I assume my LG writer doesn't like them.

[Chewy]

here's mine

[zaid786]

Hope this is right.

[Chewy]

well if all three of them show windows default drivers I guess that's ok

dell,compaq,hp?

[zaid786]

My pc's not branded its custom made, I have a gigabyte GA-K8N51GMF-9 socket 939 motherboard with a amd athlon x2 4200+

[Chewy]

http://www.gigabyte.com.tw/Support/Motherboard/Driver_Model.aspx?ProductID=1939

Have you loaded this chipset driver?

I wonder how the bios is set?

[zaid786]

Do you mean the Chipset / LAN / SATA RAID driver? I havn't loaded that since I've had the 2 sata hard drives in my pc. Shall I install it? My bios is currently at the latest revision (F7) what other settings should I check there?