Burning movies from a folder

[Skitd]

I can't figure out how to do it. I click Open Files or whatever, and they come up in proper format but I can't find the burn option.

Please help. I know it's a dumb question, but I usually never burn from a folder but from the DVD right after its ripped.

[Taelon]

Here is an image showing the New DVD compilation on the right, select all the files inside VIDEO_TS folder and either Copy them or Drag them all the way over to the Red folder on the left and drop them into it. If you're other settings are correct you'll be ready to Burn the Disc with Nero.



Still confused? Here is the complete guide "How do I use Nero to create a backup of a DVD?"

[Skitd]

Yea, I was doin that right then.

Then my problem might be software.

When I go to burn, it'll say Illegal Disc. Why would it say illegal disc? I haven't burned a DVD on here in like 3 months, but now that I want to - I can't.

[anonymez]

try updating nero to the latest version, if you haven't already done so http://www.nero.com

if still nothing,

post your nero log file, its located here: C:\Program Files\Ahead\Nero , click on the file 'NeroHistory.log', and post the last entry.

you could also check your manufacturer's website for the latest firmware for your drive

[Skitd]

See, thats the thing.


For some reason, it can't find any dvd writer drives so I can't update. I'm so blind at this cause I've never done anything like this. I work with music on a Mac, I'm not 100% with a PC or with updates like this or anything.

[benbryant]

I don't know what brand of DVD media you use. I would suggest to check for the firmware update. If the problem still persists, try the different DVD+/-R (Verbatim, I hope). I had the same error with Nero before with a lousy brand of DVD-Rs and by changing to different brand, the error has never appeared again

[Skitd]

I'm using Office Max brand DVD+Rs. They were on sell 100 for $30, I figured they were cheap but the deal I couldn't pass up. I hope they will let me return them.

I can't figure out how to download firmware or from where or anything. I feel like I'm being mind screwed. Don't want to be too nasty on the boards haha.

[Taelon]

Run nero info tool and attach the file to a message here.

[Skitd]

Here's the info tool.

[Taelon]

Nero sees your HP burner fine

Disc Information (J:\)

I don't understand these entries though:

Adapter 3
---------
Description : D347PRT SCSI Controller

Driver
Description : System32\Drivers\d347prt.sys
Company :
Version : 3.47.0.0 built by: WinDDK
Description : SCSI miniport

Attached Devices
Description : ID 0 (0): Generic DVD-ROM 1.0
Type : CD-Rom Drive
Autorun : Off
Description : ID 1 (0): Generic DVD-ROM 1.0
Type : CD-Rom Drive
Autorun : Off
Description : ID 2 (0): Generic DVD-ROM 1.0
Type : CD-Rom Drive
Autorun : Off

But anyway, are you sure you've got the J drive selected in Nero?
Where is says "G: SONY DVD RW..." in the picture you should see "J: HP DVD+R/RW ..."

[Skitd]

How do I change it?

I don't have anything Sony on here, so I don't know whats goin on with that.

[Skitd]

Here's a log from my recent try at burning.

[Skitd]

See

[jmet]

Skitd, could you post a log file from Nero ?

To do so, go here: C:\Program Files\Ahead\Nero
Look for a file named "NeroHistory.log"
Open that file up and copy the last log in it.
Then paste it here.

[Skitd]

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/28/2004 4:51:12 PM
Nero version: 6.6.0.1
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 1 - 6.6.0.1
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GKS3 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800AB-22CBA1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 2 DMA: Off

=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163 J: CDRom0
HP DVD Writer 200j I: CDRom1
Generic DVD-ROM E: CDRom2
Generic DVD-ROM F: CDRom3
Generic DVD-ROM G: CDRom4
=======================

AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (515052kB)
Free physical memory: 100MB (103048kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.9.2005
UDF/ISO compilation
2:04:55 AM #1 Phase 112 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation started

2:04:55 AM #2 Phase 114 File dlgbrnst.cpp, Line 1853
DVD-Video files reallocation completed (no file modified)

2:04:55 AM #3 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

2:04:55 AM #4 Phase 111 File dlgbrnst.cpp, Line 1853
DVD-Video files sorted

2:04:55 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

2:04:55 AM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running

2:04:55 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

2:04:55 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

2:04:55 AM #9 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

2:04:56 AM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286879 (508:11.54, 4466MB)

2:04:56 AM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

2:04:56 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HP DVD Writer 200j, Media type: DVD+R

2:04:56 AM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:04:56 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286880 (2286880) = #2286880/508:11.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286880 blocks [HP DVD Writer 200j]
--------------------------------------------------------------

2:04:56 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683530240, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286880 | lead-out | 1 | 0x00 | 0x41

2:09:26 AM #16 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

2:09:26 AM #17 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

2:09:26 AM #18 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

2:09:26 AM #19 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3,324 KB/s)

2:09:26 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

2:09:26 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03765000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

2:09:26 AM #22 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

2:09:26 AM #23 Text 0 File DVDR.cpp, Line 5367
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0

2:09:26 AM #24 CDR -1207 File DVDR.cpp, Line 4608
Book Type automatically set to: DVD-ROM

2:09:26 AM #25 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 23:46,574 (1426574ms) -> OK

2:09:26 AM #26 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes

2:09:52 AM #27 SCSI -1046 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B10000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05

2:09:52 AM #28 CDR -1046 File Writer.cpp, Line 311
Illegal disc

2:09:52 AM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

2:09:52 AM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

2:09:54 AM #31 Phase 127 File dlgbrnst.cpp, Line 1853
Generating DVD high compatibility borders

2:09:54 AM #32 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

2:09:54 AM #33 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

2:09:54 AM #34 Phase 129 File dlgbrnst.cpp, Line 1853
Generating DVD borders completed successfully

2:09:54 AM #35 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00

2:09:54 AM #36 Text 0 File DVDR.cpp, Line 5367
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0

2:09:54 AM #37 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

2:09:54 AM #38 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 4:16:52 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:27:50 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======