Pls help me check my Nero burn fail log file

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kaon
    Junior Member
    Junior Member
    • Apr 2008
    • 3
    #1

    Pls help me check my Nero burn fail log file

    Hi all,

    I am using an NEC ND3520A DVD-writer (firmware: 3.04), with Verbatim DVD+R 16x media.
    This combination has worked OK for a few years, but recently can't successfully write a single DVDR. Nero 7.2.7.0 always fails with message "No seek complete".
    Writing CDR is still fine.

    Suspicious parts:

    1:10:54 PM #27 Text 0 File DVDR.cpp, Line 6871
    Drive: _NEC DVD_RW ND-3520AW
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished with error, return code -1065

    1:10:54 PM #28 Text 0 File DVDR.cpp, Line 6300
    Drive: _NEC DVD_RW ND-3520AW
    Book Type request [NEC]: DVD-ROM
    Changing the Book Type was finished with error, return code -1065

    1:12:46 PM #31 CDR -1093 File Writer.cpp, Line 302
    No seek complete
    G: _NEC DVD_RW ND-3520AW
    I enabled find-max-speed this time, just to try if it would make any difference.
    Also wondering why the "Simulation" checkbox is greyed out in DVD-writing mode, but available in CD-writing mode.

    Any thoughts?
    Has the writer drive gone bad? or is it fixable in software?

    TIA

    Code:
    Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 1:54:32 PM 

NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0

Recorder:             <_NEC DVD_RW ND-3520AW>   Version: 3.04 - HA 1 TA 0 - 7.2.7.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <PJ1037K  BHN754H         >Version: 1.0  - HA 1 TA 1 - 7.2.7.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : _NEC DVD_RW ND-3520AW            atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : WDC WD360GD-00FLA2               atapi Port 2 ID 1  DMA: On 
DiskPeripheral       : WDC WD3200KS-00PFB0              atapi Port 3 ID 1  DMA: On 
DiskPeripheral       : HDS725050KLA360                  atapi Port 4 ID 0  DMA: On 
CdRomPeripheral      : PJ1037K BHN754H         1.0   a8zfisd8 Port 7 ID 0  DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520AW      G:   CDRom0
PJ1037K BHN754H            J:   CDRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2096356kB)
Free physical memory: 1023MB (1047612kB)
Memory in use       : 50 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.4.2008
ISO compilation
1:09:19 PM    #1 Text 0 File Isodoc.cpp, Line 6440
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : FALSE
    Multisession            : TRUE
    Multisession type:      : Start multisession
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 1 (Max. of 11 = 8 + 3 char)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660 ;1 file extensions        : TRUE
    
1:09:19 PM    #2 Text 0 File ThreadedTransfer.cpp, Line 540
    ReadBuffer-Pipe got 262144KB of Memory
    
1:09:19 PM    #3 Text 0 File Reader.cpp, Line 124
    Reader running
    
1:09:19 PM    #4 Text 0 File Writer.cpp, Line 113
    Writer G: _NEC DVD_RW ND-3520AW running
    
1:09:19 PM    #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)
    
1:09:19 PM    #6 Text 0 File Burncd.cpp, Line 3405
    Turn on Disc-At-Once, using DVD media
    
1:09:20 PM    #7 Text 0 File DlgWaitCD.cpp, Line 298
    Last possible write address on media:  2295103 (510:01.28, 4482MB)
    Last address to be written:            2134031 (474:13.56, 4168MB)
    
1:09:20 PM    #8 Text 0 File DlgWaitCD.cpp, Line 310
    Write in overburning mode: NO (enabled: CD)
    
1:09:20 PM    #9 Text 0 File DlgWaitCD.cpp, Line 2842
    Recorder: _NEC DVD_RW ND-3520AW, Media type: DVD+R
    
1:09:20 PM    #10 Text 0 File DlgWaitCD.cpp, Line 482
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
1:09:20 PM    #11 Text 0 File ThreadedTransferInterface.cpp, Line 848
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2134032 (2134032) = #2134032/474:13.57
        relocatable, disc pos for caching/writing not required/ required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2134032 blocks [G: _NEC DVD_RW ND-3520AW]
    --------------------------------------------------------------
    
1:09:20 PM    #12 Text 0 File ThreadedTransferInterface.cpp, Line 1063
    Prepare recorder [G: _NEC DVD_RW ND-3520AW] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc not fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4370497536, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |  2134032 |        0 | 0x00
            0 |        1 |   1 |    0x41 |  2134032 |        0 | 0x00
      2134032 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
1:09:20 PM    #13 Text 0 File SCSIPassThrough.cpp, Line 39
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
    
1:09:20 PM    #14 Phase 24 File dlgbrnst.cpp, Line 1730
    Caching of files started
    
1:09:20 PM    #15 Text 0 File Burncd.cpp, Line 4236
    Cache writing successful.
    
1:09:20 PM    #16 Phase 25 File dlgbrnst.cpp, Line 1730
    Caching of files completed
    
1:09:20 PM    #17 Phase 28 File dlgbrnst.cpp, Line 1730
    Speed measurement started
    
1:09:20 PM    #18 Text 0 File ThreadedTransferInterface.cpp, Line 2722
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
1:10:54 PM    #19 Text 0 File WriterStatus.cpp, Line 116
    <G: _NEC DVD_RW ND-3520AW> start writing Lead-Out at LBA 2134032 (209010h), length 0 blocks
    
1:10:54 PM    #20 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion
    
1:10:54 PM    #21 Phase 29 File dlgbrnst.cpp, Line 1679
    Speed measurement completed: 35.1x (48,492 KB/s)
    
1:10:54 PM    #22 Phase 36 File dlgbrnst.cpp, Line 1730
    Burn process started at 16x (22,160 KB/s)
    
1:10:54 PM    #23 Text 0 File ThreadedTransferInterface.cpp, Line 2722
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
1:10:54 PM    #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
    G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 
    Buffer x0b000200: Len x804
    
1:10:54 PM    #25 SPTI -1065 File SCSIPassThrough.cpp, Line 291
    G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data:   0xF9 15 01 FF 00 00 00 00 00 00 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 
    
1:10:54 PM    #26 SPTI -1065 File SCSIPassThrough.cpp, Line 291
    G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data:   0xF9 14 01 FF 00 00 00 00 00 00 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 
    
1:10:54 PM    #27 Text 0 File DVDR.cpp, Line 6871
    Drive: _NEC     DVD_RW ND-3520AW
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished with error, return code -1065
    
1:10:54 PM    #28 Text 0 File DVDR.cpp, Line 6300
    Drive: _NEC     DVD_RW ND-3520AW
    Book Type request [NEC]: DVD-ROM
    Changing the Book Type was finished with error, return code -1065
    
1:10:54 PM    #29 Text 0 File DVDPlusRW.cpp, Line 662
    Start write address at LBA 0
    DVD high compatibility mode: No
    
1:12:46 PM    #30 SPTI -1093 File SCSIPassThrough.cpp, Line 291
    G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data:   0x2A 00 00 03 6B E0 00 00 20 00 00 00 
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02 
    Buffer x04840000: Len x10000
    0xF0 30 E7 7C 28 50 5D FF DC 11 F6 C1 8D FD C2 F9 
    0xAC 04 21 23 2F 57 57 CD 5C 30 6C B0 A6 0A C5 0F 
    0x4A CB D9 D3 E2 85 37 13 15 6F F0 13 04 EF 34 D4 
    
1:12:46 PM    #31 CDR -1093 File Writer.cpp, Line 302
    No seek complete
    G: _NEC DVD_RW ND-3520AW
    
1:12:46 PM    #32 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion
    
1:12:46 PM    #33 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader
    
1:12:46 PM    #34 SPTI -1135 File SCSIPassThrough.cpp, Line 291
    G: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data:   0x5B 01 01 00 00 01 00 00 00 00 00 00 
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 
    
1:12:46 PM    #35 Phase 38 File dlgbrnst.cpp, Line 1730
    Burn process failed at 16x (22,160 KB/s)
    

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 2/2/2007 4:00:00 AM 
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 1/5/2007 3:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 3/8/2004 10:59:42 PM (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Last edited by kaon; 19 Apr 2008, 03:54 PM.
    Tags: None
    • kaon
      Junior Member
      Junior Member
      • Apr 2008
      • 3
      #2
      I've flashed the NEC ND3520A to the latest firmware from NEC: 3.07, rebooted, installed Nero 7 update, now version: 7.11.6.0
      Problem remains the same:
      Code:
      Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.11.6.0
Internal Version: 7, 11, 6, 0

Recorder:             <_NEC DVD_RW ND-3520AW>   Version: 3.07 - HA 1 TA 0 - 7.11.6.0
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      2048kB
 Bus Type      :      default
CD-ROM:               <PJ1037K  BHN754H         >Version: 1.0  - HA 1 TA 1 - 7.11.6.0
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : _NEC DVD_RW ND-3520AW            atapi Port 0 ID 0  DMA: On 
DiskPeripheral       : WDC WD360GD-00FLA2               atapi Port 2 ID 1  DMA: On 
DiskPeripheral       : WDC WD3200KS-00PFB0              atapi Port 3 ID 1  DMA: On 
DiskPeripheral       : HDS725050KLA360                  atapi Port 4 ID 0  DMA: On 
CdRomPeripheral      : PJ1037K BHN754H         1.0   amrosdka Port 7 ID 0  DMA: Off

=== CDRom-Device-Map ===
_NEC DVD_RW ND-3520AW      F:   CdRom0
PJ1037K BHN754H            J:   CdRom1
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
BUFE           : 0
Physical memory     : 2047MB (2096356kB)
Free physical memory: 1253MB (1283512kB)
Memory in use       : 38 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.4.2008
ISO compilation
2:31:40 PM    #1 Text 0 File SCSIPTICommands.cpp, Line 450
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    
2:31:40 PM    #2 Text 0 File Isodoc.cpp, Line 6671
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : FALSE
    Multisession            : TRUE
    Multisession type:      : Start multisession
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 1 (Max. of 11 = 8 + 3 char)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660 ;1 file extensions        : TRUE
    
2:31:41 PM    #3 ISO9660GEN -11 File Geniso.cpp, Line 3350
    First writeable address = 0 (0x00000000)
    
2:31:41 PM    #4 Text 0 File Burncd.cpp, Line 3500
    Turn on Disc-At-Once, using DVD media
    
2:31:41 PM    #5 Text 0 File FilesystemSettingsValidator.cpp, Line 142
    FS Settings: using validator 'CUDFSettingsValidatorDVD'
    ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
    Changing UDF revision from '1.02' to '1.02'
    
2:31:41 PM    #6 Text 0 File DlgWaitCD.cpp, Line 307
    Last possible write address on media:  2295103 (510:01.28, 4482MB)
    Last address to be written:            1417327 (314:57.52, 2768MB)
    
2:31:41 PM    #7 Text 0 File DlgWaitCD.cpp, Line 319
    Write in overburning mode: NO (enabled: CD)
    
2:31:41 PM    #8 Text 0 File DlgWaitCD.cpp, Line 2988
    Recorder: _NEC DVD_RW ND-3520AW, Media type: DVD+R
    
2:31:41 PM    #9 Text 0 File DlgWaitCD.cpp, Line 493
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    
2:31:41 PM    #10 Text 0 File ThreadedTransferInterface.cpp, Line 785
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 1417328 (1417328) = #1417328/314:57.53
        relocatable, disc pos for caching/writing not required/ required
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1417328 blocks [F: _NEC DVD_RW ND-3520AW]
    --------------------------------------------------------------
    
2:31:51 PM    #11 Text 0 File ThreadedTransferInterface.cpp, Line 986
    Prepare [F: _NEC DVD_RW ND-3520AW] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc not fixated
     Tracks 1 to 1:                                  Idx 0         Idx 1      Next Trk
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    2902687744, ISRC ""
    DAO layout:
    ===========
     ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
            0 |  lead-in |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   0 |    0x41 |        0 |        0 | 0x00
            0 |        1 |   1 |    0x41 |  1417328 |        0 | 0x00
      1417328 | lead-out |   1 |    0x41 |        0 |        0 | 0x00
    
2:31:51 PM    #12 Text 0 File SCSIPTICommands.cpp, Line 240
    SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
    
2:31:51 PM    #13 Text 0 File Burncd.cpp, Line 4286
    Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
    
2:31:51 PM    #14 Phase 24 File dlgbrnst.cpp, Line 1767
    Caching of files started
    
2:31:51 PM    #15 Text 0 File Burncd.cpp, Line 4405
    Cache writing successful.
    
2:31:51 PM    #16 Phase 25 File dlgbrnst.cpp, Line 1767
    Caching of files completed
    
2:31:51 PM    #17 Phase 36 File dlgbrnst.cpp, Line 1767
    Burn process started at 8x (11,080 KB/s)
    
2:31:51 PM    #18 Text 0 File ThreadedTransferInterface.cpp, Line 2733
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    
2:31:51 PM    #19 SPTI -1066 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x24
    Sense Qual: 0x00
    CDB Data:   0xAD 00 00 00 00 00 00 00 08 04 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 
    Buffer x079b5140: Len x804
    
2:31:51 PM    #20 SPTI -1065 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data:   0xF9 15 01 FF 00 00 00 00 00 00 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 
    
2:31:51 PM    #21 SPTI -1065 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
    Sense Key:  0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x20
    Sense Qual: 0x00
    CDB Data:   0xF9 14 01 FF 00 00 00 00 00 00 00 00 
    Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20 
    
2:31:51 PM    #22 Text 0 File DVDR.cpp, Line 7427
    Drive: _NEC     DVD_RW ND-3520AW
    Book Type request [gen]: DVD-ROM, write to EEPROM
    Changing the Book Type was finished with error, return code -1065
    
2:31:51 PM    #23 Text 0 File DVDR.cpp, Line 6834
    Drive: _NEC     DVD_RW ND-3520AW
    Book Type request [NEC]: DVD-ROM
    Changing the Book Type was finished with error, return code -1065
    
2:31:51 PM    #24 Text 0 File DVDPlusRW.cpp, Line 675
    Start write address at LBA 0
    DVD high compatibility mode: No
    
2:31:51 PM    #25 Text 0 File ThreadedTransfer.cpp, Line 268
    Pipe memory size 83836800
    
2:35:39 PM    #26 SPTI -1093 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093)
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x02
    Sense Qual: 0x00
    CDB Data:   0x2A 00 00 06 00 A0 00 00 20 00 00 00 
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 02 
    Buffer x0b0bc600: Len x10000
    0xE1 17 87 F2 99 38 E2 ED 12 48 C2 C5 9F 32 71 08 
    0xD9 33 91 E7 9C 79 8B 23 19 2D D2 C2 4A C3 8E 2A 
    0x88 E1 80 29 1C 30 C2 90 27 27 08 14 14 7F F7 B7 
    
2:35:39 PM    #27 CDR -1093 File Writer.cpp, Line 306
    No seek complete
    F: _NEC DVD_RW ND-3520AW
    
2:35:39 PM    #28 SPTI -1135 File SCSIPassThrough.cpp, Line 181
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
    Sense Key:  0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data:   0x5B 01 01 00 00 01 00 00 00 00 00 00 
    Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C 
    
2:35:39 PM    #29 Text 0 File DVDPlusRW.cpp, Line 935
    EndDAO: Last written address 393376
    
2:35:39 PM    #30 Phase 38 File dlgbrnst.cpp, Line 1767
    Burn process failed at 8x (11,080 KB/s)
    
2:35:39 PM    #31 Text 0 File SCSIPTICommands.cpp, Line 287
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
    
2:35:43 PM    #32 Text 0 File Cdrdrv.cpp, Line 11412
    DriveLocker: UnLockVolume completed
    
2:35:43 PM    #33 Text 0 File SCSIPTICommands.cpp, Line 450
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
    

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
      Any thoughts?
      Last edited by kaon; 19 Apr 2008, 07:43 PM.

        Comment

        • Chewy
          Super Moderator
          • Nov 2003
          • 18971
          #3
          download imgburn and put a blank in and post the contents of the right hand window

          BENQ DVD DD DW1650 BCIC (ATA)
          Current Profile: DVD+RW

          Disc Information:
          Status: Complete
          Erasable: Yes
          Formatted: Yes
          Sessions: 1
          Sectors: 2,295,104
          Size: 4,700,372,992 bytes
          Time: 510:03:29 (MM:SS:FF)
          Supported Write Speeds: 2.4x, 4x

          TOC Information:
          Session 1...
          -> Track 01 (Mode 1, LBA: 0 - 2295103)
          -> LeadOut (LBA: 2295104)

          Physical Format Information (ADIP):
          Disc ID: RICOHJPN-W11-01
          Book Type: DVD+RW
          Part Version: 2
          Disc Size: 120mm
          Maximum Read Rate: Not Specified
          Number of Layers: 1
          Track Path: Parallel Track Path (PTP)
          Linear Density: 0.267 um/bit
          Track Density: 0.74 um/track
          First Physical Sector of Data Area: 196,608
          Last Physical Sector of Data Area: 2,491,711
          Last Physical Sector in Layer 0: 0

          Physical Format Information (Last Recorded):
          Disc ID: RICOHJPN-W11-01
          Book Type: DVD-ROM
          Part Version: 1
          Disc Size: 120mm
          Maximum Read Rate: Not Specified
          Number of Layers: 1
          Track Path: Parallel Track Path (PTP)
          Linear Density: 0.267 um/bit
          Track Density: 0.74 um/track
          First Physical Sector of Data Area: 196,608
          Last Physical Sector of Data Area: 2,491,711
          Last Physical Sector in Layer 0: 0

            Comment

            • kaon
              Junior Member
              Junior Member
              • Apr 2008
              • 3
              #4
              Thanks Chewy,

              Here's what ImgBurn says of a fresh blank.
              Code:
              _NEC DVD_RW ND-3520AW 3.07 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2,295,104
Free Space: 4,700,372,992 bytes
Free Time: 510:03:29 (MM:SS:FF)

Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
              Then I tried using CDBurnerXP
              And it failed in a way similar to Nero7.
              At 10%,
              "Device error197120) Could not write to Disc (LBA: 224160 Length: 32).
              No Seek Complete. -0x030200"

              Here's what ImgBurn says of this coaster:
              Code:
              _NEC DVD_RW ND-3520AW 3.07 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Incomplete
Erasable: No
Sessions: 1
Free Sectors: 2,071,488
Free Space: 4,242,407,424 bytes
Free Time: 460:21:63 (MM:SS:FF)

Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
              Uh oh, just tried copying an old DVDR to hdd, and had read many errors.
              I've tried many of my old DVDr's and they all can't be read perfectly.
              WinXP Event Viewer shows many occurences of
              Event ID: 7
              The device, \Device\CdRom0, has a bad block.
              and
              Event ID: 51
              An error was detected on device \Device\CdRom0 during a paging operation.

              And I've tried using a rubber air puffer to puff the lens. It looked clean.

              If you all think it is beyond repair, then I will want to try making one of those laser pointers out of this...
              dvd burner laser pointer - Google Search
              http://www.google.com/search?q=dvd+burner+laser+pointer
              Last edited by kaon; 19 Apr 2008, 09:30 PM.

                Comment

                Previous template Next
                Working...