Nero wouldn't burn and now does not see disc?

[kenken]

hmmm

If I understand you correctly... It is not a commercial DVD. It is one that was made for me of non-copyright controlled material that I have copied in the past with no problems. The dvd shrink forum is a mystery and I'll get on it now to see what it is about.

thanks a bundle for taking the time...any further help would be appreciated. (assuming it is beyond what I have already been advised).

k

[kenken]

had a few more tips and now one burn only...?

So...I have been getting a few tips here and there. And one led my nero to now burn one dvd (after I select 20). It burns one successfully and then crashes... log below. Fascinatingly baffling. Any more thoughts to help a wayward and stranded little soul?

thanks for your tolerance.

kh

KH

1A...

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <hl-dt-st dvd+rw="" gca-4040n="">Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <hl-dt-st dvd+rw="" gca-4040n="">Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 276MB (282840kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

7.6.2006
===== Disc-Copy over image - 1st step : Copy to image ...

10:34:00 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:34:00 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

10:34:00 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 108288 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

10:34:00 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 108288 = 108288, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

10:34:00 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:34:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 108287 ( 24:03.62, 211MB)

10:34:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:34:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:34:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [Image Recorder]
--------------------------------------------------------------

10:34:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00

10:34:00 PM #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

10:34:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:35:04 PM #13 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks

10:35:04 PM #14 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:35:04 PM #15 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

10:35:09 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

10:35:09 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running

10:35:09 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <c: \documents="" and="" settings\kenneth="" hughes\desktop\actreel.nrg="">

10:35:09 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:35:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)

10:35:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:35:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

10:35:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

10:35:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------

10:35:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00

10:35:35 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

10:35:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

<not specified=""><hl-dt-st dvd+rw="" gca-4040n=""><not specified=""></not></hl-dt-st></not></c:></atapi></hl-dt-st></atapi></hl-dt-st>

[kenken]

2nd part of burn log

10:35:35 PM #13 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:35:35 PM #14 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A44E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00

10:35:35 PM #15 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400

10:35:35 PM #16 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

10:36:53 PM #17 Text 0 File WriterStatus.cpp, Line 116
<hl-dt-st dvd+rw="" gca-4040n=""> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks

10:36:53 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:39:00 PM #19 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

10:39:00 PM #20 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

10:39:00 PM #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2.4x (3,324 KB/s)

10:39:29 PM #22 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)

10:39:29 PM #23 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

10:39:29 PM #24 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

10:39:29 PM #25 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)

10:39:29 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00

10:39:29 PM #27 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)

10:39:29 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:39:29 PM #29 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified=""> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

10:39:29 PM #30 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A44E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00

10:39:29 PM #31 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400

10:39:29 PM #32 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

10:39:36 PM #33 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06BF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80

10:39:36 PM #34 CDR -1135 File Writer.cpp, Line 311
Write error

10:39:36 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:39:36 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:39:36 PM #37 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

10:39:36 PM #38 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

10:39:36 PM #39 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)</not></hl-dt-st></not>

[Chewy]

Last address to be written: 108287 ( 24:03.62, 211MB)
kind of small

source disk

5119MB

[kenken]

Again...maybe I am misunderstanding what to do with that info. But the piece I am burning is approx. 4 minutes long. The source is direct off the original dvd.

Does that answer the implied question?

Thanks again for taking the time...

kh

[Chewy]

try ripping the file with dvd shrink and test play off hard drive

[kenken]

dvd shrink to harddrive test play works fine

Loaded dvd shrink. opened dvd and saved to desktop (it automatically tried to burn it and failed which I got a log of and included.) and played it back with no problem.

thanks, k

(tried to include log but for some reason it puts over 500 smiley faces in it and does not allow over 50 images???)
<hl-dt-st d=""><atapi><not specified=""> <hl-dt-st d=""><atapi><not specified=""></not></atapi></hl-dt-st></not></atapi></hl-dt-st>

[kenken]

1A…

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e

Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 195MB (200504kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.6.2006
NeroAPI
12:27:05 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

12:27:05 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

12:27:05 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

12:27:05 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

12:27:05 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

12:27:05 PM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running

12:27:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:27:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

12:27:05 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

12:29:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108527 ( 24:07.02, 211MB)

12:29:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

12:29:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

12:29:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)

12:29:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 108528 (108528) = #108528/24:7.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108528 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------

12:29:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 222265344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108528 | lead-out | 1 | 0x41 | 0x00

12:29:08 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

12:29:08 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

12:29:08 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

12:29:08 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)

12:29:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

12:29:08 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

12:29:08 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04654E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00

12:29:08 PM #23 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400

12:29:08 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

12:29:18 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06040000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80

12:29:18 PM #26 CDR -1135 File Writer.cpp, Line 311
Write error

12:29:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:29:18 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:29:18 PM #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

12:29:18 PM #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

12:29:18 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)

12:29:18 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

12:29:18 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Chewy]

on dell

this company is well known as a "No Support" company, and you will not get much help from them

relating to the firmware problem

it doesn't even like the 8x sony media, might have luck with some other 8x
media, but probably needs 4x


probably wasting time with that old laptop burner

[kenken]

final question and suggestion

What do you suggest for burning softwares?

What do you suggest for burners? Internal and External?


I was thinking everyone that comes here should at some point enter what burner they have and anyone who came here after that could search out their burner...such as mine...they would just be able to go to the end of the thread and hear the fateful and sad words: "waste of time"

...this may exist somehow but maybe if it were a little more suggested upfront...and that may be in existence too...which would simply point out my pignorance....(cue banjos...)

thanks for your attempts, k

[Chewy]

Whenever I see such an old burner, I usually feel it's a waste of time from the start, but until we clean up the other problems you never know for sure.
Unfortunately obsolesence is just a matter of a few years(2-3) with these
beasts. If LG didn't scramble their firmware I could have read the codes and told right away if that media was supported. Running a recode log only makes it more complicated.

[kenken]

So...I beat on Dell even though their tests on my computer showed that my DVD burner should work, I kept pointing out..."it's not working."

They finally decided to send me a new burner however reluctantly and with much cajoling. I put it in and had some problems...then restarted the computer and it is magic! It works and it makes me smile.

To Dells credit. They sent it in 24 hours and they did send it for free.

They sent me: _NEC DVD+-RW ND-6650A

thanks for the help: cheers, K

[Chewy]

that's a very well rated laptop burner, they probably learned their lesson

for future reference

http://liggydee.cdfreaks.com/page/6650/