WeIrD ErRoRs

[whi55l]

Ey guys

Im ripping platoon at the monent, it gets to about 30% then gives me the following error message:

FLASKMPEG caused an invalid page fault in
module FLASKMPEG.EXE at 0177:0042ca52.
Registers:
EAX=00000000 CS=0177 EIP=0042ca52 EFLGS=00010246
EBX=0557f828 SS=017f ESP=09effca0 EBP=00000000
ECX=0050e7e0 DS=017f ESI=d8e4c46c FS=479f
EDX=064d520b ES=017f EDI=05fe8000 GS=0000
Bytes at CS:EIP:
f3 aa 8a 83 6c ff 01 00 84 c0 74 30 8b bb 74 17
Stack dump:
1c203dd2 01cd9010 064d520b 00000000 0000027f 09effcd0 00000e7f bff741fb bffc9490 bff7b787 0557f830 00000458 0559f718 00000001 0559f748 09effd00



What does all this shit mean?? Is there a problem with the individual vob files?? I have tried to rip it with both 0.594 and 0.6 with no luck...

Suggestions would be appreciated...

[setarip]

"Registers:
EAX=00000000 CS=0177 EIP=0042ca52 EFLGS=00010246
EBX=0557f828 SS=017f ESP=09effca0 EBP=00000000
ECX=0050e7e0 DS=017f ESI=d8e4c46c FS=479f
EDX=064d520b ES=017f EDI=05fe8000 GS=0000
Bytes at CS:EIP:
f3 aa 8a 83 6c ff 01 00 84 c0 74 30 8b bb 74 17
Stack dump:
1c203dd2 01cd9010 064d520b 00000000 0000027f 09effcd0 00000e7f bff741fb bffc9490 bff7b787 0557f830 00000458 0559f718 00000001 0559f748 09effd00"

Not even your good friends at Microsoft can tell you what this specifically means ;>}

You've probably got a large block of bad frames. I'd suggest that you note at exactly which frame this happens. Then restart Flask 0.594, select "Open DVD" and click on "Flask this DVD". Select "Player" from under the "Run" dropdown menu. Click on "Play". Move the slider to a bit BEFORE the problem area and watch extremely carefully. What you observe may give you/us a clue as to the nature of the problem.

[whi55l]

Thanks man.... i worked out that it was stopping at frame 54311... but i cant skip to that frame somehow, im using 0.60....

is there anyway that u can specify it to rip to say 54300, then skip 20 frames then rip it again from the say 54330?? I want this movie baaaaaaad, and its like the 3rd time ive got it from the video store....

Anyway thanks for the help

[setarip]

The following assumes that you're creating DivX-compressed .AVIs.

Yes. You can do it with Flask v.0.594 by doing two separate conversions (and then joining them using VirtualDub).

Open Flask and select "Load DVD"
For the first conversion, under "General" select 54300 FRAMES
Under "Run", select "Start Conversion"
Save as "Platoon1"

For the second conversion, under "Run" select "Player"
Click on "Play"
Move slider to just past the corrupt frames
When the slider is just where you want it, click on "Stop"
Under "General", select "Entire File"
Under "Run", select "Start Conversion"
Save as "Platoon2"

Open VirtualDub
Set "Video" to "Direct Stream Copying"
Load "Platoon1.AVI"
From the "File" dropdown menu, select "Append .AVI"
Select "Platoon2.AVI"
From the "File" dropdown menu, select "Save as AVI"
Enter a new filename (e.g. "PlatoonFinal.avi")

If, in fact, you're creating MPEGs and not AVIs, you'd use TMPGEnc for the joining as follows:

File>>MPEGTools>>Merge&Cut
Set the mode to the correct MPEG format
Load Platoon1.mpg
Load Platoon2.mpg
Enter a new filename (e.g. "PlatoonFinal.mpg") in the "Output" box
Click on the "Run" radio button

Let us know of your success ;>}

[whi55l]

Maaaaaaate i owe u sooooo much..... It worked friggn perfectly, you are a dead set champion.... Thanks sooooooooooo much for ur help, ur the best setarip! You are like a

[Kabwla]

have you tried Xmpeg?

it's a modified version of flask(6.0 preview), and much better...
I wonder why so few people know it, everybody's allways talking about flask, wich development has stopped months ago...

if you select the yuv2 option it's also bloody fast..

you can read more here:

http://www.outersurf.com/articles/dvdripping/xmpeg/