ImgBurn Lockup

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • chris83
    Junior Member
    Junior Member
    • May 2005
    • 21
    #1

    ImgBurn Lockup

    Hi All,

    I've been backing up my "Lord of the Rings" extended edition collection, using PgcEdit with ImgBurn, on Memorex DVD+R DL. I got through both "Fellowship of the Rings" discs and part I of "The Two Towers". PgcEdit set the layer break and everything burned fine. On part II of "The Two Towers" all was going well until I got to ImgBurn; things got hung up and at the bottom of the ImgBurn window it said "Setting L0 Data Zone Capacity...". Nothing further happened. I could hear my DVD drive spinning, but the burn didn't go forward.

    I'm not terribly experienced with DL DVD's, but I can't imagine it's a disc or firmware issue when the first three DVD's backed up perfectly do everything the same.

    Any ideas?

    Thank you.
    Tags: None
    • Chewy
      Super Moderator
      • Nov 2003
      • 18971
      #2
      Memorex DVD+R DL
      Memorex DVD+R RITEK...D01 2.4x DVD Media - VideoHelp
      http://www.videohelp.com/dvdmedia/memorex-dvd-r-ritek-d01-2-4/2869#comments
      Memorex DVD+R RITEK...D01 DVD Media compatibility and comments.


      actually you were very lucky many can't get even half of them to burn

        Comment

        • blutach
          Not a god of digital video
          • Oct 2004
          • 24627
          #3
          To add to Chewy's post - always post your ImgBurn log when you got a problem.

          In the meantime, read and implement the Golden Rules of Burning - a firmware update may also be in order.

          Regards
          Les

          Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

          Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
          [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

          Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

          Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


          You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

          Explore the sites and the programs - there's a gold mine of information in them

          Don't forget to play the Digital Digest Quiz!!! (Click here)

            Comment

            • chris83
              Junior Member
              Junior Member
              • May 2005
              • 21
              #4
              Reply Part I - ImgBurn Log

              I tried again this morning; this time the "Setting L0 Data Zone Capacity..." message showed up again, but only for 50 seconds or so. Then it started writing. Then it got hung up at about 42% completion. That hadn't happened before Here is the log:

              I 08:58:20 ImgBurn Version 1.3.0.0 started!
              I 08:58:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
              I 08:58:20 Initialising SPTI...
              I 08:58:20 Searching for SCSI / ATAPI devices...
              I 08:58:20 Found 1 CD-ROM and 1 DVD±RW!
              I 08:59:53 Operation Started!
              I 08:59:53 Source File: C:\RETURN_OF_THE_KING_EXTENDED_ED.ISO
              I 08:59:53 Source File Sectors: 3,912,455 (MODE1/2048)
              I 08:59:53 Source File Size: 8,012,707,840 bytes
              I 08:59:53 Source File Volume Identifier: RETURN_OF_THE_KING_EXTENDED_ED
              I 08:59:53 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
              I 08:59:53 Source File Implementation Identifier: mkisofs
              I 08:59:53 Source File UDF Revision: 1.02
              I 08:59:53 Destination Device: [4:0:0] TSSTcorp CD/DVDW TS-H552B GA04 (E (ATA)
              I 08:59:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-D01-01) (Speeds: 2.4x)
              I 08:59:53 Destination Media Sectors: 4,173,824
              I 08:59:53 Write Mode: DVD
              I 08:59:53 Write Type: DAO
              I 08:59:53 Write Speed: MAX
              I 08:59:53 Link Size: Auto
              I 08:59:53 Test Mode: No
              I 08:59:53 BURN-Proof: Enabled
              I 09:00:11 Optimal L1 Data Zone Start LBA: 1968800 (VTS_01, PGC: 1, Cell: 16)
              I 09:00:11 Optimal L0 Data Zone Capacity: 1,968,800
              I 09:00:11 Optimal L0 Data Zone Method: IFO Cell Boundary, 'SPLIP' Flag Not Set
              I 09:01:02 Filling Buffer...
              I 09:01:05 Writing LeadIn...
              I 09:01:07 Writing Image...
              I 09:01:07 Writing Layer 0... (LBA: 0 - 1968799)
              W 09:17:53 Failed to Write Sectors 1664928 - 1664959 - Write Error
              W 09:17:53 Retrying (1 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (2 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (3 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (4 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (5 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (6 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (7 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (8 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (9 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (10 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (11 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (12 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (13 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (14 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (15 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (16 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (17 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (18 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (19 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:17:53 Retrying (20 of 20)...
              W 09:17:53 Retry Failed - Invalid Address For Write
              W 09:30:01 Retrying (21)...
              W 09:30:01 Retry Failed - Invalid Address For Write
              W 09:30:02 Retrying (22)...
              W 09:30:02 Retry Failed - Invalid Address For Write
              W 09:30:05 Retrying (23)...
              W 09:30:05 Retry Failed - Invalid Address For Write
              W 09:30:06 Retrying (24)...
              W 09:30:06 Retry Failed - Invalid Address For Write
              W 09:30:07 Retrying (25)...
              W 09:30:07 Retry Failed - Invalid Address For Write
              W 09:30:08 Retrying (26)...
              W 09:30:08 Retry Failed - Invalid Address For Write
              W 09:30:09 Retrying (27)...
              W 09:30:09 Retry Failed - Invalid Address For Write
              E 09:30:15 Failed to Write Sectors 1664928 - 1664959 - Write Error
              I 09:30:15 Synchronising Cache...
              I 09:30:16 Closing Track...
              I 09:30:21 Finalising Disc...
              W 09:30:43 Potential 'WaitImmediateIO' Deferred Error - Session Fixation Error Writing Lead Out
              E 09:30:45 Finalise Disc Failed! - Reason: No Additional Sense Information
              E 09:30:45 Failed to Write Image!
              E 09:30:45 Operation Failed! - Duration: 00:30:52
              I 09:30:45 Average Write Rate: 1,904 KB/s (1.4x) - Maximum Write Rate: 3,414 KB/s (2.5x)

                Comment

                • chris83
                  Junior Member
                  Junior Member
                  • May 2005
                  • 21
                  #5
                  Reply Part II - Firmware

                  I have a Samsung TS-H552B DVD dual layer recorder. It was OEM on my eMachines PC. The firmware version I currently have is GA04. I went to the Firmware Page and it looks as though the most recent version for Gateway OEM is still GA04. Is this correct? If not, how should I proceed?

                  I've been backing up/burning for a couple years now with this setup, and I can count the number of issues I've had while doing so on one hand. I'm guessing it WAS the Memorex DVD's, but I didn't pay anything for them, so it's not a big deal.

                  Thank You.

                    Comment

                    • Chewy
                      Super Moderator
                      • Nov 2003
                      • 18971
                      #6
                      Page not found · GitHub Pages
                      http://forum.rpc1.org/dl_firmware.php?download_id=1911

                      this page is really messed up, I found reference to your firmware(gateway/emachine) in 2005 forum posts, so obviously your's is not new

                      ftp://ftp.gateway.com/pub/hardware_s...rmwareGA05.exe

                      I found this link from a 2006 post

                      I would buy a new burner tho, never did like the 552B at all, an oem version would be worse

                        Comment

                        • blutach
                          Not a god of digital video
                          • Oct 2004
                          • 24627
                          #7
                          RITEK-D01-01
                          Get rid of these and change to Verbatims.

                          Regards
                          Les

                          Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]

                          Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
                          [What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]

                          Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]

                          Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]


                          You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.

                          Explore the sites and the programs - there's a gold mine of information in them

                          Don't forget to play the Digital Digest Quiz!!! (Click here)

                            Comment

                            • chris83
                              Junior Member
                              Junior Member
                              • May 2005
                              • 21
                              #8
                              Again, thanks for all the help.

                              I upgraded the firmware to GA05; I have no plans to change burners at this time. As mentioned, I've been using this one for over two years and have had probably a 99% success rate with my burns.

                              As for the DVD DL's themselves, when buying I probably WILL go the Verbatim route, but for the time being you can't beat free samples.

                                Comment

                                • LIGHTNING UK!
                                  Author of ImgBurn
                                  • Dec 2001
                                  • 772
                                  #9
                                  Why on earth are you still running 1.3.0.0?!
                                  The Official ImgBurn Website

                                    Comment

                                    • chris83
                                      Junior Member
                                      Junior Member
                                      • May 2005
                                      • 21
                                      #10
                                      Originally Posted by LIGHTNING UK!
                                      Why on earth are you still running 1.3.0.0?!
                                      I've upgraded...I beg forgiveness.

                                        Comment

                                        Previous template Next
                                        Working...