Burn DVD From Hard Drive Fails

[miensoccer]

below is saving log on from nero
I don't know what is wrong , b/c I built this PC
I had done some before, but I never have any problem by burn dvd from HD get Fails by SCSI/IDE Command aborted


here screen shot of my system

http://www24.brinkster.com/miendang/screen.jpg

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM
Nero Version: 5.5.10.42 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.0A - HA 2 TA 0 - 5.5.10.42
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS XJ-HD166S> Version: DS18 - HA 2 TA 1 - 5.5.10.42
Adapter driver: <> HA 2
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800JB-00CRA1 17.0 nvidesm Port 1 ID 0 DMA: ?
DiskPeripheral : MAXTOR 6L080J4 A93. nvidesm Port 1 ID 1 DMA: ?
CdRomPeripheral : JLMS XJ-HD166S DS18 nvidesm Port 1 ID 0 DMA: ?
CdRomPeripheral : TDK DVDRW0404N 1.0A nvidesm Port 1 ID 1 DMA: ?
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 718MB (736132kB)
Memory in use : 29 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off

22.4.2004
Burn DVD Image
5:21:02 PM #1 Text 0 File Reader.cpp, Line 115
Reader running

5:21:02 PM #2 Text 0 File Writer.cpp, Line 125
Writer TDK DVDRW0404N running

5:21:02 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.

DAOI:
MediaCatalogNumber=''
TocType=0x00
Finalized=0x01
FirstTrack=0x01
LastTrack=0x01
ISRC=''
Blocksize=2048:
TrackMode='TRM_DATA_MODE1'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=-301668352
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=433:16.03 ( 1949703)

5:21:02 PM #4 Text 0 File Burncd.cpp, Line 3745
Turn on Disc-At-Once, using DVD media

5:21:02 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CD-ROM Mode1, Joliet)
2 indices, index0 (150) provided
original CD pos #0 + 1949703 (1949703) = #1949703/433:16.3
relocatable, CD pos for caching/writing not required/not required, patch infos
--------------------------------------------------------------

5:21:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 225
Last possible write address on media: 2298495 (510:46.45)
Last address to be written: 1949702 (433:16.02)

5:21:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 230
Write in overburning mode: FALSE

5:21:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 1700
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: Yi Jha - n 001
Disc Application Code: 64, Disc Physical Code: 193

5:21:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder TDK DVDRW0404N for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -301668352

5:21:03 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CD-ROM Mode1, Joliet)
2 indices, index0 (150) provided
original CD pos #0 + 1949703 (1949703) = #1949703/433:16.3
relocatable, CD pos for caching/writing not required/not required, patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1949703 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------

5:21:03 PM #11 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started

5:21:03 PM #12 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed

5:21:03 PM #13 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 4x (5,520 KB/s)

5:21:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0

5:21:03 PM #15 Text 0 File DVDR.cpp, Line 1443
Recording mode: Sequential Recording Mode

5:21:03 PM #16 Text 0 File Mmc.cpp, Line 18419
Set BUFE: supported -> ON

5:21:03 PM #17 Text 0 File DVDR.cpp, Line 1557
Start write address at LBA 0
DVD high compatibility mode: Yes

5:21:03 PM #18 Text 0 File Cdrdrv.cpp, Line 7929
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

5:21:11 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1443
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x02270000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

5:21:11 PM #20 Text 0 File Writer.cpp, Line 453
17:21:11.765 TDK DVDRW0404N : WriteBuffer reduced to 32768 Bytes

5:21:11 PM #21 Text 0 File Writer.cpp, Line 316
17:21:11.781 - TDK DVDRW0404N : Queue again later (Intervall : 11msec)

5:21:17 PM #22 CDR -500 File Writer.cpp, Line 333
SCSI/IDE Command aborted

5:21:17 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

5:21:17 PM #24 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

5:21:39 PM #25 Phase 38 File dlgbrnst.cpp, Line 1655
Burn process failed at 4x (5,520 KB/s)

5:21:39 PM #26 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[jiba]

1. Check your settings on the SCSI-card like: "command
queue", "reinitialize drive" and "synchronious transfer". I
had simular problems when those had wrong settings.
2. Termination of SCSI. Some SCSI-cards handle that automatically
and some don´t. Might be that you need to terminate with an
"active" termination.

[Zeplin]

Get another Burner, But not TDK, I had the same ERROR your having, A friend told me that it was the lense used for DVD recording, Mine still recorded CD's and Played DVD movies, But the DVD recorder was wasted. So I bought a Sony, and I could Record again no problem, Being the old TDK still Played movies I kept it in there and use it to play dvd's and the Sony to record..

[benbryant]

Nero Version: 5.5.10.42 (Nero Express)

Your Nero seems too old. Please update to a newer one

Recorder: <TDK DVDRW0404N> Version: 1.0A

Your burner firmware too. TDK DVDRW0404N is a NEC ND-1300A rebadged. firmware 1.0A is too old. PLease download and update to version 1.0C from the link below:

http://forum.rpc1.org/dl_firmware.php?download_id=1596

Please try the steps above and hope to correct the problem for you. Good luck. Otherwise, a new burner is needed if the problem continues

Regards

[photo_angel2004]

Or you could try IMGburn its free and in my sig.

[Zeplin]

I have done all that

I myself have tried the updates. and all the other suggestions and they didn't work. I worked on it 2 days. still nothing. Was pissing me off so thats when I just got another burner, and Had no problems ever since, And even gave me Nero.. Which I was already using anyway..

Good luck with the burning.