Burn DVD From Hard Drive Fails

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • miensoccer
    Junior Member
    Junior Member
    • Apr 2004
    • 3

    Burn DVD From Hard Drive Fails

    below is saving log on from nero
    I don't know what is wrong , b/c I built this PC
    I had done some before, but I never have any problem by burn dvd from HD get Fails by SCSI/IDE Command aborted


    here screen shot of my system





    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM
    Nero Version: 5.5.10.42 (Nero Express)
    Recorder: <TDK DVDRW0404N> Version: 1.0A - HA 2 TA 0 - 5.5.10.42
    Adapter driver: <> HA 2
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <JLMS XJ-HD166S> Version: DS18 - HA 2 TA 1 - 5.5.10.42
    Adapter driver: <> HA 2
    Bus Type : default (0) -> ATAPI, detected: ?

    === Scsi-Device-Map ===
    DiskPeripheral : WDC WD800JB-00CRA1 17.0 nvidesm Port 1 ID 0 DMA: ?
    DiskPeripheral : MAXTOR 6L080J4 A93. nvidesm Port 1 ID 1 DMA: ?
    CdRomPeripheral : JLMS XJ-HD166S DS18 nvidesm Port 1 ID 0 DMA: ?
    CdRomPeripheral : TDK DVDRW0404N 1.0A nvidesm Port 1 ID 1 DMA: ?
    =======================

    AutoRun : 1
    Excluded drive IDs:
    CmdQueuing : 1
    CmdNotification: 2
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    EraseSpeed : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 718MB (736132kB)
    Memory in use : 29 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Enabled (1)
    Wizard: Off

    22.4.2004
    Burn DVD Image
    5:21:02 PM #1 Text 0 File Reader.cpp, Line 115
    Reader running

    5:21:02 PM #2 Text 0 File Writer.cpp, Line 125
    Writer TDK DVDRW0404N running

    5:21:02 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 354
    Image was written as DAO.

    DAOI:
    MediaCatalogNumber=''
    TocType=0x00
    Finalized=0x01
    FirstTrack=0x01
    LastTrack=0x01
    ISRC=''
    Blocksize=2048:
    TrackMode='TRM_DATA_MODE1'
    TrackConfig=0x00:
    FirstIndex=00:
    LastIndex=01:
    Index0FilePos=0 Index1FilePos=307200 NextTrackFilePos=-301668352
    CUES:
    000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
    001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
    002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
    003: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=433:16.03 ( 1949703)

    5:21:02 PM #4 Text 0 File Burncd.cpp, Line 3745
    Turn on Disc-At-Once, using DVD media

    5:21:02 PM #5 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (original item values)
    0: TRM_DATA_MODE1 (CD-ROM Mode1, Joliet)
    2 indices, index0 (150) provided
    original CD pos #0 + 1949703 (1949703) = #1949703/433:16.3
    relocatable, CD pos for caching/writing not required/not required, patch infos
    --------------------------------------------------------------

    5:21:03 PM #6 Text 0 File DlgWaitCD.cpp, Line 225
    Last possible write address on media: 2298495 (510:46.45)
    Last address to be written: 1949702 (433:16.02)

    5:21:03 PM #7 Text 0 File DlgWaitCD.cpp, Line 230
    Write in overburning mode: FALSE

    5:21:03 PM #8 Text 0 File DlgWaitCD.cpp, Line 1700
    Recorder: TDK DVDRW0404N, Media type: DVD-R
    Disc Manufacturer: Yi Jha - n 001
    Disc Application Code: 64, Disc Physical Code: 193

    5:21:03 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 824
    Prepare recorder TDK DVDRW0404N for write in cue-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCTYPE: 0x0 Session Closed, CD fixated
    Tracks 1 to 1:
    TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 -301668352

    5:21:03 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 672
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CD-ROM Mode1, Joliet)
    2 indices, index0 (150) provided
    original CD pos #0 + 1949703 (1949703) = #1949703/433:16.3
    relocatable, CD pos for caching/writing not required/not required, patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1949703 blocks [TDK DVDRW0404N ]
    --------------------------------------------------------------

    5:21:03 PM #11 Phase 24 File dlgbrnst.cpp, Line 1655
    Caching of files started

    5:21:03 PM #12 Phase 25 File dlgbrnst.cpp, Line 1655
    Caching of files completed

    5:21:03 PM #13 Phase 36 File dlgbrnst.cpp, Line 1655
    Burn process started at 4x (5,520 KB/s)

    5:21:03 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1978
    Verifying CD position of item 0 (relocatable, no CD pos, patch infos, orig at #0): write at #0

    5:21:03 PM #15 Text 0 File DVDR.cpp, Line 1443
    Recording mode: Sequential Recording Mode

    5:21:03 PM #16 Text 0 File Mmc.cpp, Line 18419
    Set BUFE: supported -> ON

    5:21:03 PM #17 Text 0 File DVDR.cpp, Line 1557
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    5:21:03 PM #18 Text 0 File Cdrdrv.cpp, Line 7929
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26127F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Media Specific:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    5:21:11 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1443
    SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x02270000
    Status: 0x02 (0x03, SCSI_ABORTED)
    HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
    TA-Status 0x00 (0x00, OK)
    Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Sense Code: 0x26
    Sense Qual: 0x02
    CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
    0x00 0x00 0x00 0x00 0x26 0x02

    5:21:11 PM #20 Text 0 File Writer.cpp, Line 453
    17:21:11.765 TDK DVDRW0404N : WriteBuffer reduced to 32768 Bytes

    5:21:11 PM #21 Text 0 File Writer.cpp, Line 316
    17:21:11.781 - TDK DVDRW0404N : Queue again later (Intervall : 11msec)

    5:21:17 PM #22 CDR -500 File Writer.cpp, Line 333
    SCSI/IDE Command aborted

    5:21:17 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    all writers idle, stopping conversion

    5:21:17 PM #24 Text 0 File ThreadedTransfer.cpp, Line 216
    conversion idle, stopping reader

    5:21:39 PM #25 Phase 38 File dlgbrnst.cpp, Line 1655
    Burn process failed at 4x (5,520 KB/s)

    5:21:39 PM #26 Text 0 File Scsicmd.cpp, Line 406
    SCSI not using temporary buffers
    20 out of 20 temporary buffers allocated


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 2:02:00 AM (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
  • jiba
    Junior Member
    Junior Member
    • Apr 2004
    • 3

    #2
    1. Check your settings on the SCSI-card like: "command
    queue", "reinitialize drive" and "synchronious transfer". I
    had simular problems when those had wrong settings.
    2. Termination of SCSI. Some SCSI-cards handle that automatically
    and some don´t. Might be that you need to terminate with an
    "active" termination.

    Comment

    • Zeplin
      Junior Member
      Junior Member
      • Sep 2006
      • 2

      #3
      Get another Burner, But not TDK, I had the same ERROR your having, A friend told me that it was the lense used for DVD recording, Mine still recorded CD's and Played DVD movies, But the DVD recorder was wasted. So I bought a Sony, and I could Record again no problem, Being the old TDK still Played movies I kept it in there and use it to play dvd's and the Sony to record..

      Comment

      • benbryant
        Digital Video Master
        Digital Video Master
        • Aug 2005
        • 1314

        #4
        Nero Version: 5.5.10.42 (Nero Express)
        Your Nero seems too old. Please update to a newer one

        Recorder: <TDK DVDRW0404N> Version: 1.0A
        Your burner firmware too. TDK DVDRW0404N is a NEC ND-1300A rebadged. firmware 1.0A is too old. PLease download and update to version 1.0C from the link below:



        Please try the steps above and hope to correct the problem for you. Good luck. Otherwise, a new burner is needed if the problem continues

        Regards

        Comment

        • photo_angel2004
          Queen of Digital Video
          Queen of Digital Video
          • Jan 2004
          • 3558

          #5
          Or you could try IMGburn its free and in my sig.






          IMGburn ** ** Nero 6.6.0.18 **Intelli Type Pro 6.1 **

          Comment

          • Zeplin
            Junior Member
            Junior Member
            • Sep 2006
            • 2

            #6
            I have done all that

            I myself have tried the updates. and all the other suggestions and they didn't work. I worked on it 2 days. still nothing. Was pissing me off so thats when I just got another burner, and Had no problems ever since, And even gave me Nero.. Which I was already using anyway..

            Good luck with the burning.

            Comment

            Working...