Please Help, THis is realy Frustrating

[sdrummer44]

I keep getting an "unspecified target error" using nero when the burning is starting.

Please help

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero version: 6.6.0.3 (Nero Express)
Recorder: <SONY DVD RW DW-D56A> Version: PFS1 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DW-D56A >Version: PFS1 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D56A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-D56A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (982000kB)
Free physical memory: 583MB (597912kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.5.2005
UDF/ISO compilation
9:27:01 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

9:27:01 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

9:27:01 AM #3 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:27:01 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

9:27:01 AM #5 Text 0 File Reader.cpp, Line 127
Reader running

9:27:01 AM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D56A running

9:27:01 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

9:27:01 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

9:27:01 AM #9 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media

9:27:26 AM #10 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2276745 (505:56.45, 4446MB)

9:27:26 AM #11 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

9:27:26 AM #12 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: SONY DVD RW DW-D56A, Media type: DVD-R
Disc Manufacturer: MJC ME -
Disc Application Code: 64, Disc Physical Code: 193

9:27:26 AM #13 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.)

9:27:26 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2276896 (2276896) = #2276896/505:58.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2276896 blocks [SONY DVD RW DW-D56A]
--------------------------------------------------------------

9:27:26 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [SONY DVD RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 368115712, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2276896 | lead-out | 1 | 0x41 | 0x00

9:27:26 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:27:26 AM #17 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.

9:27:26 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:27:26 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

9:27:26 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:27:27 AM #21 Text 0 File DVDR.cpp, Line 2248
Recording mode: Sequential Recording Mode

9:27:27 AM #22 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

9:27:27 AM #23 Text 0 File DVDR.cpp, Line 2389
Start write address at LBA 0
DVD high compatibility mode: Yes

9:27:27 AM #24 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:27:32 AM #25 SCSI -400 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B230000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

9:27:32 AM #26 CDR -400 File Writer.cpp, Line 311
Unspecified target error

9:27:32 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:27:32 AM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

9:27:32 AM #29 Text 0 File DVDR.cpp, Line 2632
EndDAO: Last written address was -1

9:27:32 AM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:09 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 8:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[LT. Columbo]

have you always used these discs? try updating your firmware and nero.

[sdrummer44]

I've used these disks before.

I updated Nero, but i don't know where to find the lates firmware.

I'm using a Sony DVD RW DW-D56A

Thanks

[LT. Columbo]

i would go to the manufacturer's website...make sure you have the right model#

or this link may work

http://forum.rpc1.org/dl_all.php

i don't see your model# on this page, perhaps there is no upgrade available? is there any change after nero upgrade?

http://sony.storagesupport.com/dvdrw/firmware.htm

[sdrummer44]

How can I find out what firmware I have currently installed?

There was no change after the Nero upgrade, I've also tried burning with DVD Decrypter and was equaly unsuccesful.

I 11:15:52 DVD Decrypter Version 3.5.4.0 started!
I 11:15:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 11:15:52 Initialising SPTI...
I 11:15:52 Searching for SCSI / ATAPI devices...
I 11:16:03 Found 1 DVD±RW!
I 11:16:12 Operation Started!
I 11:16:12 Source File: C:\Moby Dick.ISO
I 11:16:12 Source File Sectors: 2,277,552 (MODE1/2048)
I 11:16:12 Source File Size: 4,664,426,496 bytes
I 11:16:12 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT (C) 1997-2005 SONIC, INC. - HAVE A NICE DAY
I 11:16:12 Source File Implementation Identifier: Roxio Toast
I 11:16:12 Destination Device: [1:0:0] SONY DVD RW DW-D56A PFS1 (E (ATA)
I 11:16:12 Destination Media Type: DVD-R (Disc ID: MJC ME) (Speeds: 2x)
I 11:16:12 Destination Media Sectors: 2,298,496
I 11:16:12 Write Mode: DVD
I 11:16:12 Write Type: SAO
I 11:16:12 Write Speed: 2.4x
I 11:16:12 Link Size: Auto
I 11:16:12 Test Mode: No
I 11:16:12 BURN-Proof: Enabled
I 11:16:13 Filling Buffer...
I 11:16:17 Writing LeadIn...
W 11:16:18 Failed to Write Sectors 0 - 31 - Write Protected
W 11:16:18 Retrying (1 of 20)...
W 11:16:18 Retry Failed - Write Protected
W 11:16:18 Retrying (2 of 20)...
W 11:16:18 Retry Failed - Write Protected
W 11:16:18 Retrying (3 of 20)...
W 11:16:18 Retry Failed - Write Protected
W 11:16:18 Retrying (4 of 20)...
W 11:16:18 Retry Failed - Write Protected
W 11:16:18 Retrying (5 of 20)...
W 11:16:19 Retry Failed - Write Protected
W 11:16:19 Retrying (6 of 20)...
W 11:16:19 Retry Failed - Write Protected
W 11:16:19 Retrying (7 of 20)...
W 11:16:19 Retry Failed - Write Protected
W 11:16:19 Retrying (8 of 20)...
W 11:16:19 Retry Failed - Write Protected
W 11:16:19 Retrying (9 of 20)...
W 11:16:20 Retry Failed - Write Protected
W 11:16:20 Retrying (10 of 20)...
W 11:16:20 Retry Failed - Write Protected
W 11:16:20 Retrying (11 of 20)...
W 11:16:20 Retry Failed - Write Protected
W 11:16:20 Retrying (12 of 20)...
W 11:16:20 Retry Failed - Write Protected
W 11:16:20 Retrying (13 of 20)...
W 11:16:20 Retry Failed - Write Protected
W 11:16:20 Retrying (14 of 20)...
W 11:16:21 Retry Failed - Write Protected
W 11:16:21 Retrying (15 of 20)...
W 11:16:21 Retry Failed - Write Protected
W 11:16:21 Retrying (16 of 20)...
W 11:16:21 Retry Failed - Write Protected
W 11:16:21 Retrying (17 of 20)...
W 11:16:21 Retry Failed - Write Protected
W 11:16:21 Retrying (18 of 20)...
W 11:16:22 Retry Failed - Write Protected
W 11:16:22 Retrying (19 of 20)...
W 11:16:22 Retry Failed - Write Protected
W 11:16:22 Retrying (20 of 20)...
W 11:16:22 Retry Failed! - Write Protected
W 11:16:36 Failed to Write Sectors 0 - 31 - Write Protected
W 11:16:36 Retrying (1 of 20)...
W 11:16:36 Retry Failed - Write Protected
W 11:16:36 Retrying (2 of 20)...
W 11:16:36 Retry Failed - Write Protected
W 11:16:36 Retrying (3 of 20)...
W 11:16:37 Retry Failed - Write Protected
W 11:16:37 Retrying (4 of 20)...
W 11:16:37 Retry Failed - Write Protected
W 11:16:37 Retrying (5 of 20)...
W 11:16:37 Retry Failed - Write Protected
W 11:16:37 Retrying (6 of 20)...
W 11:16:37 Retry Failed - Write Protected
W 11:16:37 Retrying (7 of 20)...
W 11:16:37 Retry Failed - Write Protected
W 11:16:37 Retrying (8 of 20)...
W 11:16:38 Retry Failed - Write Protected
W 11:16:38 Retrying (9 of 20)...
W 11:16:38 Retry Failed - Write Protected
W 11:16:38 Retrying (10 of 20)...
W 11:16:38 Retry Failed - Write Protected
W 11:16:38 Retrying (11 of 20)...
W 11:16:38 Retry Failed - Write Protected
W 11:16:38 Retrying (12 of 20)...
W 11:16:39 Retry Failed - Write Protected
W 11:16:39 Retrying (13 of 20)...
W 11:16:39 Retry Failed - Write Protected
W 11:16:39 Retrying (14 of 20)...
W 11:16:39 Retry Failed - Write Protected
W 11:16:39 Retrying (15 of 20)...
W 11:16:39 Retry Failed - Write Protected
W 11:16:39 Retrying (16 of 20)...
W 11:16:39 Retry Failed - Write Protected
W 11:16:39 Retrying (17 of 20)...
W 11:16:40 Retry Failed - Write Protected
W 11:16:40 Retrying (18 of 20)...
W 11:16:40 Retry Failed - Write Protected
W 11:16:40 Retrying (19 of 20)...
W 11:16:40 Retry Failed - Write Protected
W 11:16:40 Retrying (20 of 20)...
W 11:16:40 Retry Failed! - Write Protected
E 11:18:04 Failed to Write Sectors 0 - 31 - Write Protected
I 11:18:04 Synchronising Cache...
E 11:18:04 Failed to Write Image!
E 11:18:04 Operation Failed! - Duration: 00:01:51
I 11:18:04 Average Write Rate: N/A - Maximum Write Rate: N/A

[setarip]

"Failed to Write Sectors 0 - 31 - Write Protected"

Sounds like you're using a previously used piece of media.

Try another (NEW) blank disc...

[jm1647]

C0deKing says to go here temporarily til his site is back up


temporary? .rpc1.org

[sdrummer44]

I tried again with another blank, new, disk and got the same error message

[sdrummer44]

I found the Firmware update here:

http://futurvision.free.fr/Dell%20i...%20Sony%20d56a/

and flashed it to the drive.

when i tried to burn the project again i got a different error message.




I 15:27:47 DVD Decrypter Version 3.5.4.0 started!
I 15:27:47 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 15:27:47 Initialising SPTI...
I 15:27:47 Searching for SCSI / ATAPI devices...
I 15:27:47 Found 1 DVD±RW!
I 15:27:51 Operation Started!
I 15:27:51 Source File: C:\Moby Dick.ISO
I 15:27:51 Source File Sectors: 2,277,552 (MODE1/2048)
I 15:27:51 Source File Size: 4,664,426,496 bytes
I 15:27:51 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT (C) 1997-2005 SONIC, INC. - HAVE A NICE DAY
I 15:27:51 Source File Implementation Identifier: Roxio Toast
I 15:27:51 Destination Device: [1:0:0] SONY DVD RW DW-D56A PFS2 (E (ATA)
I 15:27:51 Destination Media Type: DVD-R (Disc ID: MJC ME) (Speeds: 2x)
I 15:27:51 Destination Media Sectors: 2,297,888
I 15:27:51 Write Mode: DVD
I 15:27:51 Write Type: SAO
I 15:27:51 Write Speed: 1x
I 15:27:51 Link Size: Auto
I 15:27:51 Test Mode: No
I 15:27:51 BURN-Proof: Enabled
E 15:28:05 Failed to lock volume for exclusive access.
E 15:28:05 Operation Aborted! - Duration: 00:00:13
I 15:28:05 Average Write Rate: N/A - Maximum Write Rate: N/A
I 15:28:07 Operation Started!
I 15:28:07 Source File: C:\Moby Dick.ISO
I 15:28:07 Source File Sectors: 2,277,552 (MODE1/2048)
I 15:28:07 Source File Size: 4,664,426,496 bytes
I 15:28:07 Source File Application Identifier: TOAST ISO 9660 BUILDER COPYRIGHT (C) 1997-2005 SONIC, INC. - HAVE A NICE DAY
I 15:28:07 Source File Implementation Identifier: Roxio Toast
I 15:28:07 Destination Device: [1:0:0] SONY DVD RW DW-D56A PFS2 (E (ATA)
I 15:28:07 Destination Media Type: DVD-R (Disc ID: MJC ME) (Speeds: 2x)
I 15:28:07 Destination Media Sectors: 2,297,888
I 15:28:07 Write Mode: DVD
I 15:28:07 Write Type: SAO
I 15:28:07 Write Speed: 1x
I 15:28:07 Link Size: Auto
I 15:28:07 Test Mode: No
I 15:28:07 BURN-Proof: Enabled
I 15:28:29 Filling Buffer...
I 15:28:29 Writing LeadIn...
W 15:28:30 Failed to Write Sectors 0 - 31 - Invalid Field in Parameter List
W 15:28:30 Retrying (1 of 20)...
W 15:28:30 Retry Failed - Invalid Field in Parameter List
W 15:28:30 Retrying (2 of 20)...
W 15:28:30 Retry Failed - Invalid Field in Parameter List
W 15:28:30 Retrying (3 of 20)...
W 15:28:30 Retry Failed - Invalid Field in Parameter List
W 15:28:30 Retrying (4 of 20)...
W 15:28:30 Retry Failed - Invalid Field in Parameter List
W 15:28:30 Retrying (5 of 20)...
W 15:28:31 Retry Failed - Invalid Field in Parameter List
W 15:28:31 Retrying (6 of 20)...
W 15:28:31 Retry Failed - Invalid Field in Parameter List
W 15:28:31 Retrying (7 of 20)...
W 15:28:31 Retry Failed - Invalid Field in Parameter List
W 15:28:31 Retrying (8 of 20)...
W 15:28:31 Retry Failed - Invalid Field in Parameter List
W 15:28:31 Retrying (9 of 20)...
W 15:28:31 Retry Failed - Invalid Field in Parameter List
W 15:28:31 Retrying (10 of 20)...
W 15:28:31 Retry Failed - Invalid Field in Parameter List
W 15:28:31 Retrying (11 of 20)...
W 15:28:32 Retry Failed - Invalid Field in Parameter List
W 15:28:32 Retrying (12 of 20)...
W 15:28:32 Retry Failed - Invalid Field in Parameter List
W 15:28:32 Retrying (13 of 20)...
W 15:28:32 Retry Failed - Invalid Field in Parameter List
W 15:28:32 Retrying (14 of 20)...
W 15:28:32 Retry Failed - Invalid Field in Parameter List
W 15:28:32 Retrying (15 of 20)...
W 15:28:33 Retry Failed - Invalid Field in Parameter List
W 15:28:33 Retrying (16 of 20)...
W 15:28:33 Retry Failed - Invalid Field in Parameter List
W 15:28:33 Retrying (17 of 20)...
W 15:28:33 Retry Failed - Invalid Field in Parameter List
W 15:28:33 Retrying (18 of 20)...
W 15:28:33 Retry Failed - Invalid Field in Parameter List
W 15:28:33 Retrying (19 of 20)...
W 15:28:33 Retry Failed - Invalid Field in Parameter List
W 15:28:33 Retrying (20 of 20)...
W 15:28:33 Retry Failed! - Invalid Field in Parameter List
E 15:28:36 Failed to Write Sectors 0 - 31 - Invalid Field in Parameter List
I 15:28:36 Synchronising Cache...
E 15:28:36 Failed to Write Image!
E 15:28:36 Operation Failed! - Duration: 00:00:28
I 15:28:36 Average Write Rate: N/A - Maximum Write Rate: N/A

[setarip]

Per your log, "Recorder: <SONY DVD RW DW-D56A> Version: PFS1"

You presently have v.PFS1 firmware installed...

[sdrummer44]

here's the log from Nero:

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c

Recorder: <SONY DVD RW DW-D56A> Version: PFS2 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DW-D56A >Version: PFS2 - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-D56A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
SONY DVD RW DW-D56A E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 958MB (982000kB)
Free physical memory: 513MB (525440kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

27.5.2005
UDF/ISO compilation
3:36:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

3:36:47 PM #2 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.IFO has been modified

3:36:47 PM #3 Text 0 File DVDVideoCompilation.cpp, Line 549
Content of VIDEO_TS.BUP has been modified

3:36:47 PM #4 Phase 113 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed

3:36:47 PM #5 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

3:36:47 PM #6 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

3:36:47 PM #7 Text 0 File Reader.cpp, Line 127
Reader running

3:36:47 PM #8 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DW-D56A running

3:36:47 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

3:36:47 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

3:36:47 PM #11 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

3:36:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2277791 (506:10.41, 4448MB)

3:36:48 PM #13 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

3:36:48 PM #14 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: SONY DVD RW DW-D56A, Media type: DVD-R
Disc Manufacturer: MJC ME -
Disc Application Code: 64, Disc Physical Code: 193

3:36:48 PM #15 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:36:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2277792 (2277792) = #2277792/506:10.42
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2277792 blocks [SONY DVD RW DW-D56A]
--------------------------------------------------------------

3:36:48 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [SONY DVD RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4664918016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2277792 | lead-out | 1 | 0x41 | 0x00

3:36:48 PM #18 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

3:36:48 PM #19 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.

3:36:48 PM #20 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

3:36:48 PM #21 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

3:36:48 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:36:48 PM #23 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

3:36:48 PM #24 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON

3:36:48 PM #25 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

3:36:48 PM #26 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

3:36:51 PM #27 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x037E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00

3:36:51 PM #28 CDR -400 File Writer.cpp, Line 311
Unspecified target error

3:36:51 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

3:36:51 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

3:36:51 PM #31 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was -1

3:36:51 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)


Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 6:28:09 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 8:00:00 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[jm1647]

try here for your firmware, in the posts click on what you want and then do a save as to get'em. They have one listed from '05. Yours has a date from '04

[sdrummer44]

I believe the links are broken
the following is the address for the 05 one:

http://ehome.compuserve.de/sfcnetsrv/PFS2.rar

[jm1647]

Also did you just put your burner in, there was a user on here that had a conflict because they were both sset as master I think ?

[sdrummer44]

No, it's the one that came with the computer. By the way, I succesfuly burned a CD with the PFS2 firmware so it's only a dvd problem.