Download Nero version 6.6.0.18 Here!

[Chewy]

I didn't buy a external case that was supplied with power by the USB cable.

usb doesn't supply enough power for that, an external laptop hard drive is ok

[jmet]

Oh, thought I read somewhere in reviews at newegg that it does.

It was my first time to try it like that.

[Chewy]

That's one of the problems with laptops already, not enough power.

you must have seen the models where the power adapter is in the case, I like that feature, but it's more heat

[ahlawy]

I did as you guys said with no success,
I got the following error this time
I tried to free upfree up some of the rams but it looks like some thing is eating up my RAMS

I'll try taking the laptop to bestbuy and try your advice chewbacca



Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAT****A DVD-RAM UJ-820S>Version: 1.50 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MAT****A DVD-RAM UJ-820S >Version: 1.50 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHU2100AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MAT****A DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MAT****A DVD-RAM UJ-820S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 66060288 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 446MB (457708kB)
Free physical memory: 52MB (54180kB)
Memory in use : 88 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.11.2006
UDF/ISO compilation
7:08:46 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

7:08:46 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

7:08:46 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

7:08:46 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

7:08:46 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

7:08:46 PM #6 Text 0 File Writer.cpp, Line 122
Writer MAT****A DVD-RAM UJ-820S running

7:08:46 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

7:08:46 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

7:08:46 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

7:09:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1706751 (379:16.51, 3333MB)

7:09:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

7:09:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAT****A DVD-RAM UJ-820S, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

7:09:11 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-RAM.)

7:09:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1706752 (1706752) = #1706752/379:16.52
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1706752 blocks [MAT****A DVD-RAM UJ-820S]
--------------------------------------------------------------

7:09:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAT****A DVD-RAM UJ-820S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3495428096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1706752 | lead-out | 1 | 0x41 | 0x00

7:09:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

7:09:11 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

7:09:11 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

7:09:11 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2x (2,770 KB/s)

7:09:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:09:11 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode

7:09:12 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON

7:09:12 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes

7:09:12 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:09:37 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
19:09:37.328 - MAT****A DVD-RAM UJ-820S\H1 T0 : Queue again later

7:09:39 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
19:09:39.781 - MAT****A DVD-RAM UJ-820S\H1 T0 : Queue again later

7:09:42 PM #27 SCSI -1061 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AB60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x00 0x00 0x70 0x0A
0x00 0x43 0x00 0x00 0x44 0x00

7:09:42 PM #28 CDR -1061 File Writer.cpp, Line 311
Internal target failure

7:09:42 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:09:42 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:09:42 PM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 895

7:09:42 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.132 , size=24698 bytes, created 10/22/2003 10:15:02 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.09a, size=20512 bytes, created 7/7/2004 4:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Chewy]

I would try to uninstall the easy cd/sonic burning program and run

http://tools.roxio.com/support/tools/roxizap.exe

this cleaner also

[jmet]

What about when the laptop is running off A/C power?

[Chewy]

http://www.worldstart.com/tips/tips.php/2355

500ma is the limit by design even on a real computer

my usb wireless is using 200ma, my mouse 100ma

[jenaew2]

Serial # For Nero

I upgraded to the new version of Nero and is getting that same error. What if I have a version of Nero on disc, but I don't have any idea of what version it is, can I uprgrade back to the 6.6.0.18 so that my dvd shrink and nero will burn correctly? Or how can I revert back to that version, but I don't have a serial # to put in. Please help, this is plucking my nerves be/c I don't know what to do.

[Chewy]

uninstall nero and run the clean tool, then reboot and install the older version of nero from your disk, then upgrade with the one from this thread

if nero let you upgrade to 6.6.1.4 then the version here will work once it sees your oem version from your disk installed

[jenaew2]

Serial # for Nero

I understand I can download that 6.6.0.18 version, but I am still going to need the serial #, can anybody give me that #? If I install the old version from the disc and upgrade from the the thread am I going to need the serial #? And am I going to get the whole nero suite with it?

[jenaew2]

Serial # for Nero

If I use the disc to install nero and upgrade to the 6.6.0.18 thread will I still need the serial #? And will I get the whole suite like I have now? i don't want the 6.6.1.4, that is why I am having this problem now. I don't see the thread and how can I upgrade without upgrading all the way to the newest one? Can I choose what version I want to upgrade to and what is the download for the clean tool? I also have dvd shrink and imgburn, do I need to uninstall them and reinstall them too?

[jenaew2]

Serial # for 6.6.0.18

How do I get the serial # for 6.6.0.18? Does anyone have that or know where I can get that? Need it desperately to reinstall this version of nero.

[soup]

Uninstall the Nero you have now (6.6.1.4), then do an install from the disc that you have. Your serial# will appear during that install, write it down. After you have installed from the disc come to this thread & update through the link supplied.

[mfc90125]

Experiencing the Error ONLY with Single Layers

Greetings:

After reading all of your most excellent postings on this subject, I reverted my Nero back to 6.6.0.18 and expected all of my problems to be solved. Unfortunately, I am unable to burn to single-layer discs only.

BTW, these files were originally ripped using DVD Shrink and can each movie be viewed in a media player with no problem. Attempt to burn it, and you get a different story.

Any suggestions?

Thanks!

[Gary D]

Have you enable burning with Nero ticked in DVD Shrink?

When selecting the output, are you selecting burning with Nero?

Can you attach a Nero log? (See my signature on how to attach your last log).