Burn Backup dvd to blank dvd?

**BR7** · 20 Jul 2006, 04:04 AM

If you have Nero Copy DVD works very well

**photo_angel2004** · 20 Jul 2006, 04:05 AM

You can use DVD Decryter and rip in .ISO Mode and burn with IMGburn from a .ISO file.

**Inferno1** · 20 Jul 2006, 06:03 AM

Well I tried decryptor as shown above and got an iso error then i tried nero again and got an error i saved the error report here it is.If anyone can tell me what it means it would be greatly appreciated thanks!

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-105 >Version: 1.33 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 4K060H3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-12102C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON LTR-12102C E: CDRom0
PIONEER DVD-RW DVR-105 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 345MB (353660kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2006
===== Disc-Copy over image - 1st step : Copy to image ...

4:42:08 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

4:42:08 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

4:42:08 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2285888 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

4:42:08 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2285888 = 2285888, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

4:42:08 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

4:42:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2285887 (507:58.37, 4464MB)

4:42:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

4:42:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

4:42:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:42:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2285888 (2285888) = #2285888/507:58.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285888 blocks [Image Recorder]
--------------------------------------------------------------

4:42:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681498624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285888 | lead-out | 1 | 0x41 | 0x00

4:42:09 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

4:42:09 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:55:05 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 2285888 (22E140h), lenght 0 blocks

4:55:05 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:55:05 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

4:55:21 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

4:55:21 PM #2 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running

4:55:21 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681498624
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:58.38 ( 2285888) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Andy\My Documents\TempImage.nrg>

4:55:21 PM #4 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

4:59:27 PM #5 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285887 (507:58.37, 4464MB)

4:59:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

4:59:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

4:59:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)

4:59:27 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2285888 (2285888) = #2285888/507:58.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285888 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------

4:59:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681498624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285888 | lead-out | 1 | 0x41 | 0x00

4:59:28 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

4:59:28 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

4:59:28 PM #13 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

4:59:28 PM #14 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

4:59:28 PM #15 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

4:59:28 PM #16 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

4:59:31 PM #17 Text 0 File Cdrdrv.cpp, Line 1288
16:59:31.500 - PIONEER DVD-RW DVR-105\H1 T1 : Queue again later

4:59:34 PM #18 SCSI -1061 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF7 0x1D 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9

4:59:34 PM #19 CDR -1061 File Writer.cpp, Line 311
Internal target failure

4:59:34 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

4:59:34 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

4:59:35 PM #22 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 767

4:59:35 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.27b, size=16000 bytes, created 9/7/2001 11:06:20 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Chewy** · 20 Jul 2006, 06:26 AM

that firmware's almost 2 years old, have you had any luck burning those 16x dvd-r's before?

**BR7** · 20 Jul 2006, 07:17 AM

@Chewy
Out of curiosity could this be causing problems or would this be considered the recent one that don't cause problems that you referred to in another post

(Prassi/Veritas driver for win 2K)

**Chewy** · 20 Jul 2006, 07:22 AM

according to LuK, they should have fixed it recently, anything from late 2005 or early 2006 should be ok.
anything like 2001 would be the "kiss of death" to nero

good eye jedi master

this would defintely be a good candidate for roxizap

**BR7** · 20 Jul 2006, 07:25 AM

Thanks chewy

this would defintely be a good candidate for roxizap

I agree
Or he could use Windows Installer CleanUp Utility 1.0 to remove Roxio/Sonic programs

Link to firmware use 1.10

**Chewy** · 20 Jul 2006, 07:30 AM

what's really complicated is the old drivers, only hose the aspi bus but don't hose the spti one, that's why nero 6.6.14 and imgburn can work better.
the newer/bad sonic (2004 or 2005) hose the spti bus and screw up the spti
burn programs.

clear as mud?

**Inferno1** · 20 Jul 2006, 07:34 AM

I suppose it is a drive problem,the thing is i just got this comp off a friend for free and its a sony viao, circa 2002 so the drive is probably worn out.Although I havent tried burning non backup dvds yet.

**Chewy** · 20 Jul 2006, 07:39 AM

those old pioneers last a long time, try to beg, borrow or steal even trade for an 8x blank before giving up.

and try this

Message

http://www.download3k.com/DownloadLink1-Roxio-Zap.html

**Inferno1** · 20 Jul 2006, 08:22 AM

I used the roxiozap and an 8x dvd this time. Still no luck. Heres the nero error report

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
(Nero Express)
Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <PIONEER DVD-RW DVR-105 >Version: 1.33 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 4K060H3 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-12102C atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PIONEER DVD-RW DVR-105 atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON LTR-12102C E: CDRom0
PIONEER DVD-RW DVR-105 F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523808kB)
Free physical memory: 326MB (334044kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.7.2006
===== Disc-Copy over image - 1st step : Copy to image ...

6:55:05 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

6:55:05 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running

6:55:05 PM #3 Text 0 File DVDCopy.cpp, Line 279
DVD Track-Information from source disc
S01 T01 Con 0x14 Start 0 Len 2285888 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

6:55:05 PM #4 Text 0 File DVDCopy.cpp, Line 382
Max -1 tracks of 1 allowed to copy
1: 0 - 2285888 = 2285888, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

6:55:05 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

6:55:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 2285887 (507:58.37, 4464MB)

6:55:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

6:55:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?

6:55:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:55:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2285888 (2285888) = #2285888/507:58.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285888 blocks [Image Recorder]
--------------------------------------------------------------

6:55:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681498624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285888 | lead-out | 1 | 0x41 | 0x00

6:55:05 PM #12 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning

6:55:05 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:10:00 PM #14 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 2285888 (22E140h), lenght 0 blocks

7:10:01 PM #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:10:02 PM #16 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully

===== Disc-Copy over image - 2nd step : Burn the image ...

7:10:19 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

7:10:19 PM #2 Text 0 File Writer.cpp, Line 122
Writer PIONEER DVD-RW DVR-105 running

7:10:22 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4681498624
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:58.38 ( 2285888) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Andy\My Documents\TempImage.nrg>

7:10:24 PM #4 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media

7:19:33 PM #5 SCSI -1033 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x01
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x04 0x01

7:19:42 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2285887 (507:58.37, 4464MB)

7:19:42 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)

7:19:42 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193

7:19:42 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD-R/RW.)

7:19:42 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2285888 (2285888) = #2285888/507:58.38
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285888 blocks [PIONEER DVD-RW DVR-105]
--------------------------------------------------------------

7:19:42 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681498624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2285888 | lead-out | 1 | 0x41 | 0x00

7:19:43 PM #12 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

7:19:43 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

7:19:43 PM #14 Text 0 File DVDR.cpp, Line 2267
Recording mode: Sequential Recording Mode

7:19:43 PM #15 Text 0 File Mmc.cpp, Line 21469
Set BUFE: Buffer underrun protection -> ON

7:19:43 PM #16 Text 0 File DVDR.cpp, Line 2421
Start write address at LBA 0
DVD high compatibility mode: Yes

7:19:43 PM #17 Text 0 File Cdrdrv.cpp, Line 8438
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

7:19:46 PM #18 Text 0 File Cdrdrv.cpp, Line 1288
19:19:46.843 - PIONEER DVD-RW DVR-105\H1 T1 : Queue again later

7:19:49 PM #19 SCSI -1061 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0xD9
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x02 0xF9 0x17 0x0E
0x00 0x00 0x00 0x00 0x44 0xD9

7:19:49 PM #20 CDR -1061 File Writer.cpp, Line 311
Internal target failure

7:19:49 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

7:19:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

7:19:50 PM #23 Text 0 File DVDR.cpp, Line 2658
EndDAO: Last written address was 767

7:19:50 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.27b, size=16000 bytes, created 9/7/2001 11:06:20 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:42 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**BR7** · 20 Jul 2006, 08:31 AM

you still haven't updated your firmware I provided you a link in the above post
also update your nero to version 6.6.0.18
I have one question for you after you used roxizap did you restart your computer if so did roxio try to reinstall itself

**Inferno1** · 20 Jul 2006, 11:20 AM

I never had roxio at all just nero.I just tried to burn a movie from a regular dvd (not a backup) and it failed. Also it will not let me even burn music files or wmv files to cd either. On the other hand my cd rw drive works fine with nero so I would think my dvd rw drive needs to be replaced.

**BR7** · 20 Jul 2006, 11:31 AM

Have you even did your updates or tried New DVD Media

Burn Backup dvd to blank dvd?

Burn Backup dvd to blank dvd?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment