Will someone look at logfile, nero burn

[Chewy]

doesn't look good for that drive at all

You might try another drive or try that drive in another computer

there are a lot of bads ones on google

[NightTran]

Hello, I was able to use ripit4me successfully, however, burn failed using nero then using imgburn. Can someone please review the attached logs and help? Thanks!

Pam in KC

wonder if you have Any DVD in the back ground when burning, that would cause the verify, play the last 2 or 3 disks that you post I think they are fine ?

[lancenpam]

Do you think the drive is bad?

I'll kill DVD43 it probably is running, should i just remove that program? seems it does interfere a lot with burns.

Nighttrain, what do mean abt playing the last 2 or 3 discs? The ones I've burned recently do work, seems to work when it wants to.. Thanks again and I'll re-post after I try to burn again

[soup]

After you remove Dvd43, do a search on your PC for it just in case it left some stuff behind.

[NightTran]

I'll kill DVD43 it probably is running, should i just remove that program? seems it does interfere a lot with burns.

Nighttrain, what do mean abt playing the last 2 or 3 discs? The ones I've burned recently do work, seems to work when it wants to.. Thanks again and I'll re-post after I try to burn again

the last two or three burn logs that you post likely they are good just because of your dvd43 that make the the verify part say bad but you can put those disks back and play I think they are good

[lancenpam]

Still problems

I haven't been trying to burn much lately, got a bit discouraged. But, I have had some successful burns. Now I am back to bad ones.. please look at this logfile Thanks for all your help!


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 7:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ASUS DVD-E616P3H >Version: 1.04 - HA 0 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVDRRW GWA-4166B E: CDRom0
ASUS DVD-E616P3H F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1038764kB)
Free physical memory: 400MB (409776kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

11.5.2007
Burn DVD Image
12:26:19 PM #1 Text 0 File Reader.cpp, Line 127
Reader running

12:26:19 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRRW GWA-4166B running

12:26:19 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

12:26:19 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2170680 (482:22.30, 4239MB)

12:26:19 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

12:26:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R
Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

12:26:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:26:19 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2170681 (2170681) = #2170681/482:22.31
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2170681 blocks [HL-DT-ST DVDRRW GWA-4166B]
--------------------------------------------------------------

12:26:19 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4445554688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2170681 | lead-out | 1 | 0x41 | 0x00

12:26:19 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

12:26:19 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

12:26:19 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

12:26:19 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

12:26:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:26:19 PM #15 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: YUDEN000
Media type ID: T02
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:26:19 PM #16 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

12:26:55 PM #17 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x06DC0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80

12:26:55 PM #18 CDR -1135 File Writer.cpp, Line 311
Write error

12:26:55 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:26:55 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

12:26:55 PM #21 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

12:26:55 PM #22 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

12:26:55 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/4/2006 9:42:42 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 4:53:22 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Dan]

That log looks about the same or actually worse then the log posted over 3 months ago. (system resources at 60%, drivers??)

You need to take care of those issues.

Chewy's hunch may have been bang on about the burner going belly up.

[Chewy]

I would certainly give Imgburn a try after using the filter tool and rebooting

[Dan]

I see that ImgBurn was used back in January as well.

Several logs with all kinds of errors. Seems the most recent log was verification error, not burn error??

From page 1 ImgBurn log....

I 22:27:28 Operation Successfully Completed! - Duration: 00:10:11
I 22:27:28 Average Write Rate: 9,218 KB/s (6.7x) - Maximum Write Rate: 11,185 KB/s (8.1x)
I 22:27:28 Cycling Tray before Verify...
W 22:27:38 Waiting for device to become ready...
I 22:27:55 Device Ready!
I 22:27:55 Operation Started!
I 22:27:55 Source Device: [0:0:0] HL-DT-ST DVDRRW GWA-4166B 1I24 (E (ATA)
I 22:27:55 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MCC-004-00) (Speeds: 4x, 8x, 12x, 16x)
I 22:27:55 Image File: C:\SAW_3_UNRATED.ISO
I 22:27:55 Image File Sectors: 2,286,162 (MODE1/2048)
I 22:27:55 Image File Size: 4,682,059,776 bytes
I 22:27:55 Image File Volume Identifier: SAW_3_UNRATED
I 22:27:55 Image File Implementation Identifier: DVD Shrink
I 22:27:55 Image File File System(s): ISO9660, UDF (1.02)
I 22:28:01 Verifying Sectors...
E 01:48:34 Failed to read Sector 2012368 - Illegal Mode For This Track
E 01:48:34 Sector 2012368 maps to File: VIDEO_TS\VTS_11_1.VOB
E 01:48:34 Failed to Verify Sectors!
E 01:48:34 Operation Failed! - Duration: 03:20:38

[Chewy]

verify can be hosed by anydvd or dvd43 so it really doesn't mean the burner is bad

[Dan]

Yeah, it could be just fine. Maybe something disrupting it during verify?? And those burns might be just fine.

[lancenpam]

Thanks for the replies. I may have been throwing good dvd's away huh? Maybe I should start checking them first.

I do have a couple of questions. Someone said system resources 60%, drivers? How do I fix that? Also another mention the filter tool, where do I find this? I did remove DVD43 a few months ago and did a search to see if parts were still around, and it found nothing.

Thanks again.

[Dan]

I do have a couple of questions. Someone said system resources 60%, drivers? How do I fix that? Also another mention the filter tool, where do I find this? I did remove DVD43 a few months ago and did a search to see if parts were still around, and it found nothing.

You can read about reducing System Resources in the link below.

http://forum.digital-digest.com/showthread.php?t=56373&highlight=free+system+resources

As for the other issues, go back and read this entire thread from the start. Instructions and links were all provided in detail.

[Chewy]

let's backtrack 3 months and do post number 4, or use newest imgburn and post the filter log

I know this is not very user friendly but it's not that hard either

[lancenpam]

Chewy, is this what u meant:

----------------------------------------------------
Filter Driver Load Order http://www.bustrace.com
----------------------------------------------------

Upper Device Filter: redbook
Device Object: HL-DT-ST DVDRRW GWA-4166B
Lower Class Filter: ASAPIW2k
Lower Class Filter: PxHelp20
Lower Device Filter: imapi

Driver Name: redbook.sys
File Location: c:\windows\system32\drivers
File Description: Redbook Audio Filter Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation

Driver Name: asapiw2k.sys
File Location: c:\windows\system32\drivers
File Description: ASAPI
File Version: 6, 0, 2, 27 [6.0.2.27]
Product Name: asapi
Product Version: 6, 0, 2, 0 [6.0.2.0]
Company Name: Pinnacle Systems GmbH

Driver Name: pxhelp20.sys
File Location: c:\windows\system32\drivers
File Description: Px Engine Device Driver for Windows 2000/XP
File Version: 3.00.41a [3.0.41.0]
Product Name: PxHelp20
Product Version: [2.0.0.0]
Company Name: Sonic Solutions

Driver Name: imapi.sys
File Location: c:\windows\system32\drivers
File Description: IMAPI Kernel Driver
File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) [5.1.2600.2180]
Product Name: Microsoft® Windows® Operating System
Product Version: 5.1.2600.2180 [5.1.2600.2180]
Company Name: Microsoft Corporation