Newbee needs some help. Please view Log

**soup** · 24 Jan 2007, 05:34 PM

Well just for starters, with a brief glance your DMA is off & your Nero needs updating.

Edit: When you update Nero do not install InCD & you are going to have to wait on a pro to see if there is a firmware update because I could not find one. Why don't you give The Golden Rules a read while you are waiting.

**Tjones** · 24 Jan 2007, 05:50 PM

OK a few ?'s on IDE ATA/ATAPI Controllers

In my IDE ATA/ATAPI Controllers I have 2 Primary IDE Channels On the first labeled 0 I have transfer mode DMA if available and on the current transfer mode I have UDMA mode 5. then I have directly under that DMA if available and Current transfer mode says Not applicable. Do I need to change anything and do I need to delete on of the two primary IDE channels. Thanks alot for your help. jones

**alberrosidus** · 24 Jan 2007, 05:52 PM

I'm obviously new here but why does it seem half the posts in this forum are about nero or some other program like DVDFab? Isn't this the DVD shrink forum?
Sorry, TJ. Not trying to hijack your post...just getting confused. Wish I could help ya.

**LT. Columbo** · 24 Jan 2007, 06:13 PM

Originally Posted by alberrosidus

I'm obviously new here but why does it seem half the posts in this forum are about nero or some other program like DVDFab? Isn't this the DVD shrink forum?
Sorry, TJ. Not trying to hijack your post...just getting confused. Wish I could help ya.

there are many sub-forums.

**Tjones** · 24 Jan 2007, 07:06 PM

Newbee needs some help. Please view Log

Hello I am new to your Forum and need some help. Someone else told me that I needed to update nero, which I did and anither told me that my DMA was wrong. I really need some help. I'm going through disks like they are free. Please look at this log and advise what I need to to to burn at least 1 DVD. Thanks in advance. Jones

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <HP DVD Writer 740b> Version: ED24 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 740b E: CDRom0
IDE-DVD DROM6216 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1014MB (1038764kB)
Free physical memory: 518MB (531156kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.1.2007
NeroAPI
1:46:41 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

1:46:41 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

1:46:41 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

1:46:41 AM #4 Text 0 File Reader.cpp, Line 127
Reader running

1:46:41 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

1:46:41 AM #6 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 740b running

1:46:41 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:46:41 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

1:46:41 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

1:50:35 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

1:50:35 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO

1:50:35 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 740b, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D21, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7

1:50:35 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)

1:50:35 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [HP DVD Writer 740b]
--------------------------------------------------------------

1:50:35 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 740b] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

1:50:35 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

1:50:35 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

1:50:35 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

1:50:35 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 8x (11,080 KB/s)

1:50:35 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:50:35 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: SONY....
Media type ID: D21
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 53 4F 4E 59 00 - 00 00 00 44 32 31 00 38 ...SONY....D21.8
23 54 37 14 00 28 6E 00 - 80 69 17 19 0C 0C 0A 0B #T7..(n..i......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

1:50:35 AM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes

1:56:39 AM #23 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x00CF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80

1:56:39 AM #24 CDR -1135 File Writer.cpp, Line 311
Write error

1:56:39 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

1:56:39 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

1:56:39 AM #27 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders

1:56:39 AM #28 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully

1:56:39 AM #29 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 8x (11,080 KB/s)

1:56:39 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

1:56:39 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 3:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**Dan** · 24 Jan 2007, 10:55 PM

Originally Posted by Tjones

Hello I am new to your Forum and need some help. Someone else told me that I needed to update nero, which I did and anither told me that my DMA was wrong. I really need some help. I'm going through disks like they are free. Please look at this log and advise what I need to to to burn at least 1 DVD. Thanks in advance. Jones
<hp dvd="" writer="" 740b=""><atapi>
=== Scsi-Device-Map ===
CdRomPeripheral : HP DVD Writer 740b atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : IDE-DVD DROM6216 atapi Port 0 ID 1 DMA: On

Recorder: HP DVD Writer 740b, Media type: DVD+R
<not specified="">

Your DMA is still OFF on the HP burner.

Here is a great guide on DMA

</not></atapi></hp>

**katzdvd** · 24 Jan 2007, 11:11 PM

Recorder: <HP DVD Writer 740b> Version: ED24

Firmware update is available - Release Date: 2006-08-23 Version: HI24 http://h10025.www1.hp.com/ewfrf/wc/g...tem=pv-42566-1

Confirm your burner with the proper update prior to flashing.

regards, katz

**soup** · 25 Jan 2007, 12:27 AM

You are nowhere near ready to burn as I told you in Post #2, so wasting blanks is all on you, so you have a choice to make. You can either take the advice being given here & you will burn or keep creating your Christmas decorations for this year. When you update your firmware, do it from safe mode & no disc in drive.

**Chewy** · 25 Jan 2007, 03:15 AM

Originally Posted by soup

You are nowhere near ready to burn as I told you in Post #2, so wasting blanks is all on you, so you have a choice to make. You can either take the advice being given here & you will burn or keep creating your Christmas decorations for this year. When you update your firmware, do it from safe mode & no disc in drive.

soup has spoken for a lot of us, not to be mean or anything but ignoring good advise from people trying to help is no way to get help

crossposting and starting a new thread is disrespectful and wasting others time

threads merged

**Tjones** · 25 Jan 2007, 06:45 AM

Look Guys

Look I never meant to disrespect anyone and have no idea what cross threading is, just neded some help and people are throwing Binary junk and other stuff I do not understand. This is the Newbie forum isnt it. I read your reports on DMA and attempted to download the firmware however unaware if worked. I am utilizing the information given to me, just new at this, my bad. I would just like someone to help

**Chewy** · 25 Jan 2007, 06:53 AM

Let's just stay in this thread and fix the problem

for dma try this quick fix

Online Poker And Real Money

http://winhlp.com/WxDMA.htm

for the firmware follow katz's link and soup's advise

we can only meet you halfway with the help

**Tjones** · 26 Jan 2007, 04:47 PM

Thanks for the help so far but still not working.

I updated the firmware and my DMA appears to be on all however In my IDE ATA/ATAPI Controllers I have 2 Primary IDE Channels On the first labeled 0 I have transfer mode DMA if available and on the current transfer mode I have UDMA mode 5. then I have directly under that DMA if available and Current transfer mode says Not applicable. On the second Primary I have DMA if available and Ultra DMA mode 2 Do I need to change anything and do I need to delete or deactivate on of the two primary IDE channels. When I tried to burn it stopped. Thanks alot for your help. jones

**Chewy** · 26 Jan 2007, 09:34 PM

new log please

Newbee needs some help. Please view Log

Newbee needs some help. Please view Log

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment