hello I have been doing some reading from this forum on bitsetting and I was wondering how can I test my dvds to see if they were changed to be seen as a dvdrom instead of dvd+r.
bitsetting
Collapse
X
-
Les
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
-
hello again I have tried imgburn to check my discs but I think i may be doing something wrong. I burnt a movie onto a dvd+rw disc and I used the the steps found on this forum on how to change the bitsetting or booktyping to dvdrom can someone tell me what i may be doing wrong. here are the results
HL-DT-ST DVDRAM GSA-E10L LE05 (USB)
Current Profile: DVD+RW
Disc Information:
Status: Complete
Erasable: Yes
Formatted: Yes
Sessions: 1
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x
TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 2295103)
-> LeadOut (LBA: 2295104)
Physical Format Information (Last Recorded):
Disc ID: PHILIPS-041-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Current Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Preferred Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Maximum Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)Comment
-
that part I quoted in the middle, which is not a burn log
you have to verify the disk to see it in a burn log
nero has that feature, too bad it doesn't format rw's very well
#26 Text 0 File DVDR.cpp, Line 5600
Drive: _NEC DVD_RW ND-3540A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
11:44:06 AM #27 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROMComment
-
HL-DT-ST DVDRAM GSA-E10L LE05 (USB)
Current Profile: DVD+RW
Disc Information:
Status: Complete
Erasable: Yes
Formatted: Yes
Sessions: 1
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x
TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 2295103)
-> LeadOut (LBA: 2295104)
Physical Format Information (Last Recorded):
Disc ID: PHILIPS-041-00
=(Book Type: DVD-ROM)= Here I am.
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Current Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Preferred Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Maximum Format Capacity:
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Comment
Comment