of all the encoder-which one
Collapse
X
-
-
I just did one that took 100 minutes Disc size was 6.69gb
Reduction Level for DVD-5: 66.5%
- Overall Bitrate : 6,598/5,279Kbs
- Space for Video : 3,971,120KB
- HIGH/LOW/TYPICAL Bitrates: 5,510/786/5,279 KbsAttached FilesComment
-
Size in Gb is not the issue BR7. Measure in frames!
139606 frames in 100 minutes = 23 fps. Not bad. 78 minute movie in 100 minutes.
BTW: Remember to have convert to YUY2 on (options → AVS Options). This will be default in 1.10.8 (if it is not already).
RegardsLast edited by blutach; 20 Sep 2006, 09:54 PM.Les
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
Comment
-
Remember to have convert to YUY2 on (options → AVS Options). This will be default in 1.10.8 (if it is not already)
Thanks bluComment
-
@BR7 - don't bother burning it then.
RegardsLes
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
Comment
-
I am glad you said something I will have to redo it.Here is that second sopranos disc I said that I'd post
Processed 298,150 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 54.8%
- Overall Bitrate : 2,649/2,119Kbs
- Space for Video : 3,216,904KB
- HIGH/LOW/TYPICAL Bitrates: 3,482/786/2,119 Kbs
Phase II ENCODING completed in 178 minutesAttached FilesComment
-
That's pretty snappy - 28 fps. What are you using hardware-wise?
Not at all sure how it will look at 2119 kbps. I mean with Procoder you got a great chance of it coming out well. But you might consider Half-D1. That's quicker, too
And allow me to correct something I said earlier. Since 1.10.7, DVD Rebuilder automatically converts to yuy2 for Procoder. You can check this by opening any AVS file in your d2vavs folder. Apologies.
RegardsLast edited by blutach; 21 Sep 2006, 02:50 PM.Les
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
Comment
-
It's my
Dell E510 Pentium D 2.80GHz
1 gig RAM
80GB HDD
128MB ATI Radeon X300 SE with HyperMemoryComment
-
Well, that is a good frame rate for that machine and that encoder at mastering quality. (I get 30 PAL frames per sec = 1.2 x real time).
RegardsLes
Essential progs - [PgcEdit] [VobBlanker] [MenuShrink] [IfoEdit] [Muxman] [DVD Remake Pro] [DVD Rebuilder] [BeSweet] [Media Player Classic] [DVDSubEdit] [ImgBurn]
Media and Burning - [Golden Rules of Burning] [Media quality] [Fix your DMA] [Update your Firmware] [What's my Media ID Code?] [How to test your disc]
[What's bitsetting?] [Burn dual layer disks safely] [Why not to burn with Ner0] [Interpret Ner0's burn errors] [Got bad playback?] [Burner/Media compatibility]
Cool Techniques - [2COOL's guides] [Clean your DVD] [Join a flipper] [Split into 2 DVDs] [Save heaps of Mb] [How to mock strip] [Cool Insert Clips]
Real useful info - [FAQ INDEX] [Compression explained] [Logical Remapping of Enabled Streams] [DVD-Replica] [Fantastic info on DVDs]
You should only use genuine Verbatim or Taiyo Yuden media. Many thanks to www.pcx.com.au for their supply and great service.
Explore the sites and the programs - there's a gold mine of information in them
Comment
-
The average BR is not going below 2K, I wonder how would the quality be, under 2K. BR7, I remember you having the King Kong disc .Comment
-
(I get 30 PAL frames per sec = 1.2 x real time).
Processed 293,554 frames.
-- Building .AVS and .ECL files
- Reduction Level for DVD-5: 49.8%
- Overall Bitrate : 2,493/1,994Kbs
- Space for Video : 2,980,426KB
- HIGH/LOW/TYPICAL Bitrates: 3,417/786/1,994 Kbs
Phase II ENCODING completed in 177 minutes
I also attached some screen shots
Last edited by BR7; 22 Sep 2006, 11:23 AM.Comment
-
See you can immediately start seeing the stresses of the encoder now, I guess those will be more visible if High <= 2500 and Avg <= 1600.
Sop3 - see the steering and the airbag and the ear
Sop6- halos around the bar
Sop9- halos around the standing man
Although overall the quality is good. I would say its similar to what can be achieved +/- few Q factors with autoQmatenc.Comment
Comment