divex to play on dvd player

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JEDD
    Junior Member
    Junior Member
    • Oct 2003
    • 2

    divex to play on dvd player

    hello anybody can u help ,iv got a divexfilm on a cd ,
    i want to play it on a dvd player for the tv , can i add something or compress it .helppppppppppp
  • setarip
    Retired
    • Dec 2001
    • 24955

    #2
    To create a VCD:

    1) Load .AVI file into TMPGEnc
    2) Set to "System Video and Audio" (lower right side)
    3) Click on "Setting" radio button
    4) Click on "System" tab, change mode to "MPEG1-VideoCD" (from default of "MPEG1")
    5) Click on "Advanced" tab, change "Video arrange method" to "Center (Custom Size"), change dimensions to 352x288 or 352x240
    6) Change "Source aspect ratio" to either "4:3 525 line (NTSC 704x480)", "4:3 525 line (NTSC)", or "16:9 525 line (NTSC)" - If you're in the PAL world choose either of the two similar PAL settings instead
    7) Under the "Video" tab, change the dimensions to 352x288 or 352x240 (Note: "Video" tab mode of "MPEG1" is okay) - set "Motion Search Precision" to "Normal Quality". Change the "Aspect Ratio" to match, as closely as possible, the "Source Aspect Ratio" you set under the "Advanced" tab.
    8) Change "Rate Control Mode" to "Automatic VBR (CQ_VBR)" and "Bitrate" to "1,150"
    9) Under the "Audio" tab, set to "MPEG-1 Layer II", 44,100 224Kbps
    10) Press "Start"

    (Or, instead of the steps 1)-10) above, you could attempt to use TMPGEnc's VCD "wizard"/template)

    Note that if your video runs longer than 70-80 minutes, you'll have to subsequently split your VCD-MPG file in two. This too can be easily and precisely accomplished using TMPGEnc. Under the "Files" dropdown menu, click on "MPEG Tools" and select the "Merge & Cut" tab. Once again, make sure to change the mode to "MPEG1-Video CD". Load your file and enter a new (.MPG) name in the "Output file" box. Then doubleclick on the ORIGINAL file's name in the window, which will bring you to the cutting area. Select your desired start and end points for the first half, click on "Okay" which will bring you back to the first window and generate (in a sequence of three automated steps) the first new file. To create the second new file, repeat the steps starting with "Then doubleclick on the ORIGINAL..." (be extra patient with the second half, as the program has to do more seeking to establish the beginning of the new file).

    Use a burning program, such as NERO to burn your CD-R or R/W CD as a VCD (DON'T ask NERO to format the file as a VCD, since you've already accomplished this!)

    Let us know of your success ;>}

    Comment

    Working...