When it rains it pours

[Chewy]

download and just execute

[mill]

Ok well i try, first i am going to get it on line

[Chewy]

well mill,
guess what chewy's doing with his asus NF2 mobo, installing windows again,
a little googling and I found the serial raid chipset drivers caused data corruption. asus still doesn't have the new drivers on their website.
The fact that I was running my system drive off a raptor 10,000K rpm
hard drive didn't help anything. Now let's see if I can get those ide drivers to work right!

[Chewy]

I LEFT OFF ALL THE ASUS AND NVIDIA CRAP!
shrink just made an iso of stealth in 1 min and 37 sec!

now just for blu, I will load imgburn not nero!

[mill]

I 17:52:16 ImgBurn Version 1.1.0.0 started!
I 17:52:16 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)
I 17:52:16 Initialising SPTI...
I 17:52:16 Searching for SCSI / ATAPI devices...
I 17:52:16 Found 1 DVD±RW!
I 17:52:54 Operation Started!
I 17:52:54 Source File: D:\THE_BROTHERS_GRIMM.ISO
I 17:52:54 Source File Sectors: 2,285,849 (MODE1/2048)
I 17:52:54 Source File Size: 4,681,418,752 bytes
I 17:52:54 Source File Implementation Identifier: DVD Shrink
I 17:52:54 Destination Device: [1:0:0] _NEC DVD_RW ND-3550A 1.Y4 (E (ATA)
I 17:52:55 Destination Media Type: DVD+R (Disc ID: RITEK-R03-02) (Speeds: 2.4x, 4x, 6x, 8x)
I 17:52:55 Destination Media Sectors: 2,295,104
I 17:52:55 Write Mode: DVD
I 17:52:55 Write Type: DAO
I 17:52:55 Write Speed: 8x
I 17:52:55 Link Size: Auto
I 17:52:55 Test Mode: No
I 17:52:55 BURN-Proof: Enabled
I 17:52:55 Filling Buffer...
I 17:52:55 Writing LeadIn...
W 17:53:28 Failed to Write Sectors 0 - 31 - Power Calibration Area Error
W 17:53:28 Retrying (1 of 20)...
W 17:53:48 Retry Failed - Power Calibration Area Error
W 17:53:48 Retrying (2 of 20)...
I 17:53:58 Writing LeadIn...
I 17:54:00 Writing Image...
I 18:04:10 Synchronising Cache...
I 18:04:11 Closing Track...
I 18:04:27 Finalising Disc...
I 18:04:41 Operation Successfully Completed! - Duration: 00:11:46
I 18:04:41 Average Write Rate: 7,494 KB/s (5.4x) - Maximum Write Rate: 11,637 KB/s (8.4x)


Chewy, took a break for awhile had to get some air, sorry to leave you hang, i look at the bios screen again at start up. It seems i have bios rev-1015 after all, i was looking in the wrong place the first time. I opened the case and took a hammer to it , no just joking, but i did play around with the ide and the power cable, dont no ,but i was able to do the above burn somewhat?

[UncasMS]

looks like you've made it!

congrats, mill!

[Chewy]

what have you done since your last post?
to the computer?

[mill]

nada , all i did was get in the case and moved the wires around and was wandering what all those wires were for.

[mill]

It did try to fail did you see that in the log?
UncasMs, thanks but i really didnt do anything.

[mill]

I LEFT OFF ALL THE ASUS AND NVIDIA CRAP!
shrink just made an iso of stealth in 1 min and 37 sec!

now just for blu, I will load imgburn not nero!

Now thats quick

[Chewy]

loose connections!?

[cynthia]

Looking at your installed firmware: (Disc ID: RITEK-R03-02)

This modified firmware don't do anything with these discs that the original one don't. The original one does max 4X - and you had one posted burning log that went ok when you burned at 4X.

[mill]

I wish i knew , i did a couple burns, and each time i get the same error, maybe the nec itself. The ribbon had a bad bend in it, i dont have a clue.

[cornholio7]

swap the cable with a new one to eliminate that, is it an 80 wire?

[mill]

Cynthia ,
yea i did iso read and iso write, but it did not load in my pc or my home dvd player? I was testing the drive that was the only burning software i had on at that time, i think. Very long day