New CPU/Mboard,? OP System for svcd?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Easier Way?
    Gold Member
    Gold Member
    • Jan 2003
    • 108

    New CPU/Mboard,? OP System for svcd?

    Hi'
    I intend to upgrade from a PII 266 to something a bit faster so I can do more than one svcd a week.
    I will try an athlon 2.4 or similar and was thinking of an asus MB to presumably work well with my asus v7100 delux combo graphics/capture card.

    Do I really need to change from Windows 98se as I believe that the Seattle mafia will not allow XP to be also used on the museum piece I intend to assemble from all my old upgrade left-overs which will now make up an entire PC.

    Any ideas please?

    PS would 256 mb of memory be sufficient?
    Last edited by Easier Way?; 3 Aug 2003, 09:37 PM.
  • setarip
    Retired
    • Dec 2001
    • 24955

    #2
    "Do I really need to change from Windows 98se"

    Not if you're building your own system...

    Comment

    • Easier Way?
      Gold Member
      Gold Member
      • Jan 2003
      • 108

      #3
      Thanks again Setarip,
      Am I likely to encounter any incompatibilities using old software with new hardware?
      I have never changed motherboards before, do they come with reasonable documentation and start-up disks?
      Sorry if this is too obvious.

      Comment

      • setarip
        Retired
        • Dec 2001
        • 24955

        #4
        "Thanks again Setarip"

        My pleasure ;>}

        Comment

        • UncasMS
          Super Moderator
          • Nov 2001
          • 9047

          #5
          I have never changed motherboards before
          make yourself familiar with ALL neccessary steps before you even think about unpacking your new hardware!

          search the net for guides on this and take particular care when mounting the heatsink!

          if you have never done this before, chances are you'll ruin your new cpu.

          maybe you better get some help from someone familiar with this.

          Comment

          • Easier Way?
            Gold Member
            Gold Member
            • Jan 2003
            • 108

            #6
            Thanks UncasMS
            I had my old 486 in pieces a few times so maybe I'm too confident. I'll probably go ahead carefully, buying from an electronics shop so I can ask all the right questions. Will check out the mag's and the net.

            PS Does the heatsink need a thermal paste or does it go on dry?

            Comment

            • UncasMS
              Super Moderator
              • Nov 2001
              • 9047

              #7
              i'd always use GOOD thermal paste but please be VERY careful with your cpu's die!


              breaking the edges of the cpu happens faster than you might think.

              make sure to put the heatsink on the cpu without tilting or you might break smallest pieces of the edge which can render the cpu useless.

              Comment

              • Easier Way?
                Gold Member
                Gold Member
                • Jan 2003
                • 108

                #8
                Thank you UncasMS
                Is this best done with the cpu on the MB?

                Comment

                Working...