WinAVI

**LT. Columbo** · 6 Oct 2005, 11:19 AM

welcome

'

"The problem is that the video is perfect using Windows Media Player or RealPlayer etc. but when I watch it using my dvd player and tv, the video is choppy and isn't that great of quality, "

which is it, the ORIGINAL avi, or the converted file on your pc plays ok with windows media player/realplayer?

**shattersys** · 6 Oct 2005, 11:31 AM

Both. When I play them on my home dvd, the audio is in-sync and fine but the video is a little choppy. I tried writing it at a slower speed and also tried buring it for quality in WinAVI but it didn't help

**LT. Columbo** · 6 Oct 2005, 11:36 AM

ok, so your saying the converted file after winavi is fine, so it has to be the burn process.

can you please post a log from nero

c/programfiles/ahead/nero/nerohistory.log

**shattersys** · 6 Oct 2005, 11:40 AM

It's fairly big, I can AIM it to you if you have it...I also used TMPGenc DVD Author 1.6 to author the file, then burnt it..

1A20-020E-0000-1349-1210-6697*

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A100 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A100 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120M0 YAR5 viamraid Port 3 ID 2 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 667MB (683288kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.10.2005
UDF/ISO compilation
8:35:34 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

8:35:34 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

8:35:34 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:35:34 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

8:35:34 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

8:35:34 PM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

8:35:34 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:35:34 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

8:35:34 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

8:35:34 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1061615 (235:54.65, 2073MB)

8:35:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

8:35:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

8:35:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

8:35:34 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1061616 (1061616) = #1061616/235:54.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1061616 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

8:35:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2174189568, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1061616 | lead-out | 1 | 0x41 | 0x00

8:35:34 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

8:35:35 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

8:35:35 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

8:35:35 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

8:35:35 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

8:35:35 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MAXELL..
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8
23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

8:35:35 PM #22 Text 0 File DVDR.cpp, Line 5135
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

8:35:35 PM #23 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM

8:35:35 PM #24 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

8:39:26 PM #25 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 1061616 (1032F0h), lenght 0 blocks

8:39:27 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

8:39:43 PM #27 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 24/09/2005 10:02:32 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

**LT. Columbo** · 6 Oct 2005, 11:48 AM

the top part is missing.

"I also used TMPGenc DVD Author 1.6 to author the file, then burnt it.."

no point in that since winavi will output dvd structure files...(unless you want a menu)

**shattersys** · 6 Oct 2005, 11:52 AM

did you want the whole log? it goes back to april..lol..if not i think the part you need is there ^

**LT. Columbo** · 6 Oct 2005, 11:54 AM

keep in mind, there are several logs in there stacked on top of each other---note the dates and times in them. the most recent is at the bottom. here is one of my logs from a good burn, compare and paste your entire log please.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.8 (Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1213S>Version: TS0D - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON LTR-52246S >Version: 6S02 - HA 1 TA 1 - 6.6.0.8
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2F040J0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1213S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON LTR-52246S atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1213S E: CDRom0
LITE-ON LTR-52246S F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 191MB (196028kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.10.2005
UDF/ISO compilation
9:22:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

9:22:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

9:22:52 PM #3 Text 0 File Isodoc.cpp, Line 6172
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

9:22:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

9:22:53 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

9:22:53 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1213S running

9:22:53 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:22:53 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)

9:22:53 PM #9 Text 0 File Burncd.cpp, Line 3153
Turn on Disc-At-Once, using DVD media

9:22:53 PM #10 Text 0 File DlgWaitCD.cpp, Line 259
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2220575 (493:27.50, 4337MB)

9:22:53 PM #11 Text 0 File DlgWaitCD.cpp, Line 271
Write in overburning mode: NO (enabled: CD)

9:22:53 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316
Recorder: LITE-ON DVDRW SOHW-1213S, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193

9:22:53 PM #13 Text 0 File DlgWaitCD.cpp, Line 433
>>> Protocol of DlgWaitCD activities: <<<
=========================================

9:22:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2220576 (2220576) = #2220576/493:27.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2220576 blocks [LITE-ON DVDRW SOHW-1213S]
--------------------------------------------------------------

9:22:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [LITE-ON DVDRW SOHW-1213S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4547739648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2220576 | lead-out | 1 | 0x41 | 0x00

9:22:54 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

9:22:54 PM #17 Text 0 File Burncd.cpp, Line 4040
Cache writing successful.

9:22:54 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

9:22:54 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)

9:22:54 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

9:22:54 PM #21 Text 0 File DVDR.cpp, Line 2194
Recording mode: Sequential Recording Mode

9:22:54 PM #22 Text 0 File Mmc.cpp, Line 21235
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON

9:22:54 PM #23 Text 0 File DVDR.cpp, Line 2340
Start write address at LBA 0
DVD high compatibility mode: Yes

9:22:54 PM #24 Text 0 File Cdrdrv.cpp, Line 8430
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

9:23:14 PM #25 Text 0 File Cdrdrv.cpp, Line 1287
21:23:14.640 - LITE-ON DVDRW SOHW-1213S\H1 T0 : Queue again later

9:37:01 PM #26 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1213S> start writing Lead-Out at LBA 2220576 (21E220h), lenght 0 blocks

9:37:01 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

9:37:01 PM #28 Text 0 File DVDR.cpp, Line 2603
EndDAO: Last written address was 2220575

9:37:25 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 26/12/2004 10:11:40 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 12:59:42 AM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

**shattersys** · 6 Oct 2005, 12:08 PM

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\PROGRA~1\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.16
Internal Version: 6, 6, 0, 16b
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A100 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A100 - HA 0 TA 0 - 6.6.0.16
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y120M0 YAR5 viamraid Port 3 ID 2 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4163B D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 671MB (687852kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

5.10.2005
UDF/ISO compilation
5:33:54 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started

5:33:54 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)

5:33:54 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

5:33:54 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted

5:33:54 PM #5 Text 0 File Reader.cpp, Line 127
Reader running

5:33:54 PM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running

5:33:54 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

5:33:54 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

5:33:54 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

5:33:54 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 239231 ( 53:09.56, 467MB)

5:33:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)

5:33:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3

5:33:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================

5:33:54 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 239232 (239232) = #239232/53:9.57
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 239232 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------

5:33:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 489947136, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
239232 | lead-out | 1 | 0x41 | 0x00

5:33:55 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started

5:33:55 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.

5:33:55 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed

5:33:55 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)

5:33:55 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

5:33:55 PM #21 Text 0 File Cdrdrv.cpp, Line 8862
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

5:33:55 PM #22 Text 0 File DVDR.cpp, Line 5135
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

5:33:55 PM #23 CDR -1207 File DVDR.cpp, Line 5065
Book Type automatically set to: DVD-ROM

5:33:55 PM #24 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes

5:35:13 PM #25 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 239232 (3A680h), lenght 0 blocks

5:35:13 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:35:36 PM #27 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders

5:35:36 PM #28 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully

5:35:36 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)

5:35:36 PM #30 Phase 78 File dlgbrnst.cpp, Line 1832
Data verification started

5:35:39 PM #31 SCSI -1064 File Cdrdrv.cpp, Line 1180
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0012B3D4
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
CDB Data: 0xB6 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1C 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x23 0x05 0x3F 0x10
0xB6 0x00 0x00 0x0E 0x21 0x00

5:36:55 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

5:36:55 PM #33 Phase 80 File dlgbrnst.cpp, Line 1832
Data verification completed successfully

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 24/09/2005 10:02:32 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

**LT. Columbo** · 6 Oct 2005, 12:12 PM

"5:35:36 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)"

you might want to try and burn at 2x, or 4x. i'd also turn on the DMA to your HD.(but it's not the problem here). i'll see if i can find an update for your writer.

**shattersys** · 6 Oct 2005, 12:22 PM

Originally Posted by LT. Columbo

"5:35:36 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)"

you might want to try and burn at 2x, or 4x. i'd also turn on the DMA to your HD.(but it's not the problem here). i'll see if i can find an update for your writer.

I just tried at 4x and it was the same. Yesterday I burned a copy of Training Day using DVD Shrink and it was perfect quality so I wonder if I should use a different program than WinAVI?

**LT. Columbo** · 6 Oct 2005, 12:26 PM

but you said you had a downloadedl file that you needed to convert, shrink will not do this for you. when it comes to converting files, winavi has to be one of the worst tools out there.

**shattersys** · 6 Oct 2005, 12:29 PM

It could be that it's WINAVI. I also tried using TMPGEnc but kept getting errors when I tried to use the .avi file i wanted.

**LT. Columbo** · 6 Oct 2005, 12:33 PM

tmpgenc is excellent. i can help you with that program if you want to go that route, i use it all the time and am pretty sure i can help you get that file on a dvd.

**shattersys** · 6 Oct 2005, 12:40 PM

Originally Posted by LT. Columbo

tmpgenc is excellent. i can help you with that program if you want to go that route, i use it all the time and am pretty sure i can help you get that file on a dvd.

That would be awesome. Alright when I open the project wizard and try to select the .avi file I want to convert I get this error.

File"C\Documents and Settings\Cory\desktop\dvd\the_xfiles.s07e11.avi" cannot open, or unsupported.

WinAVI

WinAVI

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment